Thermal co-reduction approach to vary size of silver nanoparticle: its microbial and cellular toxicology

In recent years, silver nanoparticles (AgNPs) have attracted considerable interest in the field of food, agriculture and pharmaceuticals mainly due to its antibacterial activity. AgNPs have also been reported to possess toxic behavior. The toxicological behavior of nanomaterials largely depends on its size and shape which ultimately depend on synthetic protocol. A systematic and detailed analysis for size variation of AgNP by thermal co-reduction approach and its efficacy toward microbial and cellular toxicological behavior is presented here. With the focus to explore the size-dependent toxicological variation, two different-sized NPs have been synthesized, i.e., 60 nm (Ag60) and 85 nm (Ag85). A detailed microbial toxicological evaluation has been performed by analyzing minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), diameter of inhibition zone (DIZ), growth kinetics (GrK), and death kinetics (DeK). Comparative cytotoxicological behavior was analyzed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. It has been concluded by this study that the size of AgNPs can be varied, by varying the concentration of reactants and temperature called as “thermal co-reduction” approach, which is one of the suitable approaches to meet the same. Also, the smaller AgNP has shown more microbial and cellular toxicity.     

Reduction of DNA mismatch repair protein expression in airway epithelial cells of premenopausal women chronically exposed to biomass smoke

Biomass burning is a major source of indoor air pollution in rural India. This study examined whether chronic inhalation of biomass smoke causes change in the DNA mismatch repair (MMR) pathway in the airway cells. For this, airway cells exfoliated in sputum were collected from 72 premenopausal nonsmoking rural women (median age 34 years) who cooked with biomass (wood, dung, crop residues) and 68 control women who cooked with cleaner fuel liquefied petroleum gas (LPG) for the past 5 years or more. The levels of particulate matters with diameters less than 10 and 2.5 μm (PM₁₀ and PM_2.5) in indoor air were measured by real-time aerosol monitor. Benzene exposure was monitored by measuring trans,trans-muconic acid (t,t-MA) in urine by high-performance liquid chromatography with ultraviolet detector. Generation of reactive oxygen species (ROS) and level of superoxide dismutase (SOD) in airway cells were measured by flow cytometry and spectrophotometry, respectively. Immunocytochemical assay revealed lower percentage of airway epithelial cells expressing MMR proteins mutL homolog 1 (MLH1) and mutS homolog 2 (MSH2) in biomass-using women compared to LPG-using controls. Women who cooked with biomass had 6.7 times higher level of urinary t,t-MA, twofold increase in ROS generation, and 31 % depletion of SOD. Indoor air of biomass-using households had three times more particulate matters than that of controls. ROS, urinary t,t-MA, and particulate pollution in biomass-using kitchen had negative correlation, while SOD showed positive correlation with MSH2 and MLH1 expression. It appears that chronic exposure to biomass smoke reduces MMR response in airway epithelial cells, and oxidative stress plays an important role in the process.     

Cu(II) removal using green adsorbents: kinetic modeling and plant scale-up design

Cu(II) adsorption in continuous column using green adsorbents like peanut and almond shell was investigated. Fourier transform infrared (FTIR) spectroscopy, Brunaer-Emmett-Teller (BET) analysis, scanning electron microscopy (SEM), and Point of Zero charge (pH_pzc) determination have been used for characterization of the adsorbents. Experiments were conducted at various operating conditions to calculate the adsorption capacity of the adsorbents. Adsorption studies signify that both the adsorbents have good adsorptive capacity for Cu(II) ion. Equilibrium of adsorption was described using Langmuir isotherm and the highest q_max value for both the adsorbent were obtained at an operating condition of 20 ml/min flow rate, 15 mg/L influent Cu(II) concentration, and 7 cm bed depth. Regeneration of both the adsorbents suggests that these adsorbents can be used several times for Cu(II) removal. Seven different kinetic models were tested among which the modified dose response model was fitted well for peanut shell and the Thomas model was fitted well for almond shell. These fitted models were further used for scale-up design. Regeneration studies show that peanut shell and almond shell are useful up to the fifth adsorption cycle. Application of these adsorbents with industrial effluent was also reported. This study reveals that peanut and almond shells can be used for Cu(II) removal for industrial wastewater.

     

Assessment of health hazard due to fluoride in groundwater from a rural area in east-coast of India and remedial measures

The present research deals with the quantification of health hazard in a fluorosis prone area from east-coast of India. The average health hazard quotients are 2.09, 2.42, 1.79, and 1.69 for infants, children, male, and female adults, respectively. These values are more than the tolerance limit (1) in 92% groundwater samples and 96% of the study area. The children are more vulnerable to fluorosis than infants and adults. Ca²⁺/ Na⁺ versus HCO₃⁻/Na⁺ and Ca²⁺/Na⁺ versus Mg²⁺/Na⁺ plots suggest silicate weathering as the prime factor while linear relationship of TDS versus NO₃⁻ + (Cl⁻/HCO₃⁻) supports the anthropogenic input of F⁻ to the aquifer system. The study suggests that the F⁻ ions are chiefly derived from fluorite, apatite, biotite, and hornblende present in the granitic basement under alkaline environment. The secondary sources are domestic and industrial sewage as well as return flow from irrigation with ingredients of phosphate fertilizers. The adverse effects of fluorosis can be minimized by mass awareness programmes, alternative source of potable drinking water, defluoridation techniques, dilution of high F⁻ concentration in groundwater, and minimizing the use of phosphate fertilizers.     

Effects of climate and land use changes on groundwater resources in coastal aquifers

To estimate the freshwater loss in coastal aquifers due to salinisation, a numerical model based on the sharp interface assumption has been introduced. The developed methodology will be useful in areas where limited hydrological data are available. This model will elaborate on the changes in fresh groundwater loss with respect to climate change, land use pattern and hydrologic soil condition. The aridity index has been introduced to represent the variations in precipitation and temperature. The interesting finding is that the deforestation leads to increase groundwater recharge in arid areas, because deforestation leads to reduce evapotranspiration even though it favors runoff. The combined climate and land use scenarios show that when the aridity index is less than 60, the agricultural lands give higher groundwater recharge than other land use patterns for all hydrologic soil conditions. The calculated recharge was then used to estimate the freshwater-saltwater interface and percentage of freshwater loss due to salinity intrusion. We found that in arid areas, the fresh groundwater loss increases as the percentage of forest cover increases. The combined effects of deforestation and aridity index on fresh groundwater loss show that deforestation causes an increase in the recharge and existing fresh groundwater resource in areas having low precipitation and high temperature (arid climates).     

Predictability by Box-Behnken model for carbaryl adsorption by soils of Indian origin

This study was undertaken to investigate the adsorption capacity of carbaryl on four Indian soils with different physiochemical properties. A batch adsorption study was carried out in order to evaluate the maximum adsorption capacity of carbaryl using a Response Surface Methodology (RSM). The effects of operating parameter such as initial carbaryl concentration (1–20 mgL^?1), adsorbent dosage (0.5–6 g) and contact time (10–180 min) were examined. The proposed quadratic model for Box-Behnken design fits very well to the experimental data because it may be used to navigate design space according to ANOVA results. The regression co-efficient (R²) of the models developed and the results of validation experiments conducted at optimal conditions strongly suggests that the predicted values are in good agreement with experimental results. Contour and response surface plots are used to determine the interactions effects of main factors and optimal conditions of the process. The experiment can be utilized as a guideline for better understanding of carbaryl adsorption onto soil under different operating conditions. The results show that the forest soil is most efficient in binding carbaryl (Sevin) than the other types of soil tested.     

Effect of excess fluoride ingestion on human thyroid function in Gaya region,Bihar, India

Fluoride (F) is mainly ingested through drinking water and food. In addition to producing dental and skeletal fluorosis, excess fluoride may affect the functioning of many organs including the thyroid gland. The present study investigated the thyroid function of subjects with dental fluorosis from F-endemic areas of Gaya region, Bihar, India and compared it with control individuals from Bodh Gaya. The mean F concentration in groundwater of F-endemic area was 2.82 ± 0.18 mg/L (range 0.62–7.2 mg/L), while that of control area was 0.49 ± 0.04 mg/L (range 0.21–0.76 mg/L). Abnormal levels of T3, T4, and TSH were found in the study subjects from both control and F-endemic areas.     

A process integration approach to industrial water conservation: a case study for an Indian starch industry

A case study for water using network of a Starch industry in the state of Gujarat, India, is undertaken with an aim to reduce demineralised water and freshwater flow rates and consequently the wastewater flow rate. The problem was identified as a multi contaminant, reuse and recycle problem. The freshwater consumption and demineralised water consumption were 100 t/h and 51 t/h respectively before modification and the network was dealing with three major contaminants such as total organic content, total dissolved solids and total suspended solids. A program was developed in MATLAB for analysis using Water Pinch. The improved water using network designed for the present work consumed less demineralised and freshwater. The reductions are of the tune of 28% and 64.38% for demineralised and fresh water respectively. Due to alteration in piping, there will be a saving of 406 026 INR per year, which will be utilized for development of efficient environment policy for the company. The entire concept had been implemented on plant level on 1st February-2009 and the reductions are of the tune of 25% and 60% for demineralised and fresh water respectively.     

Paternal factors in recurrent pregnancy loss: an insight through analysis of non-synonymous single-nucleotide polymorphism in human testis-specific chaperone HSPA2 gene

Environmental Science and Pollution Research - Heat shock protein A2 (HSPA2) is a testis-specific molecular chaperone of the 70 kDa heat shock protein (HSP70) family and reported to play a key role...     

Variation of Aulacoseira granulata as an eco-pollution indicator in subtropical large river Ganga in India: a multivariate analytical approach

Environmental Science and Pollution Research - Aulacoseira granulata (Ehrenberg) Simonsen 1979 are considered as the eco-variable species which varies in density and diversity along with their...