Sampling and Mapping a Soil Erosion Cover Factor by Integrating Stratification,Model Updating and Cokriging with Images

Cost-efficient sample designs for collection of ground data and accurate mapping of variables are required to monitor natural resources and environmental and ecological systems. In this study, a sample design and mapping method was developed by integrating stratification, model updating, and cokriging with Landsat Thematic Mapper (TM) imagery. This method is based on the spatial autocorrelation of variables and the spatial cross-correlation among them. It can lead to sample designs with variable grid spacing, where sampling distances between plots vary depending on spatial variability of the variables from location to location. This has potential cost-efficiencies in terms of sample design and mapping. This method is also applicable for mapping in the case in which no ground data can be collected in some parts of a study area because of the high cost. The method was validated in a case study in which a ground and vegetation cover factor was sampled and mapped for monitoring soil erosion. The results showed that when the sample obtained with three strata using the developed method was used for sampling and mapping the cover factor, the sampling cost was greatly decreased, although the error of the map was slightly increased compared to that without stratification; that is, the sample cost-efficiency quantified by the product of cost and error was greatly increased. The increase of cost-efficiency was more obvious when the cover factor values of the plots within the no-significant-change stratum were updated by a model developed using the previous observations instead of remeasuring them in the field.     

Is Municipal Solid Waste Recycling Economically Efficient?

It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000–2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.     

Environmental Policy Beliefs of Stakeholders in Protected Area Management

Although the importance of understanding stakeholder beliefs regarding environmental policy has been noted by many authors, research focusing on the heterogeneity of stakeholder views is still very scarce and concentrated on a product-oriented definition of stakeholders. The aim of the present study is to address this gap by examining environmental policy beliefs of stakeholder groups engaged in protected area management. Questionnaires containing 73 five-point Likert scale items were administered to eight different stakeholder groups involved in the management of Greek protected areas. Items referred to core beliefs on environmental policy, namely, the value framework and sustainable development, and secondary beliefs, that is, beliefs on social consensus and ecotourism development. Our study used as a starting point respondent recruitment on the basis of a traditional product-centered approach. We investigated whether environmental policy beliefs can be used to effectively segregate stakeholders in well-defined segments, which override the product-oriented definition of stakeholders. Indeed, K-means clustering revealed an innovation-introduction and an implementation-charged sample segment. The instrument utilized in this research proved quite reliable and valid in measuring stakeholder environmental policy beliefs. Furthermore, the methodology implied that stakeholder groups differ in a significant number of belief-system elements. On the other hand, stakeholder groups were effectively distinguished on a small set of both core and secondary beliefs. Therefore, the instrument used can be an effective tool for determining and monitoring environmental policy beliefs of stakeholders in protected area management. This is of considerable importance in the Greek case, given the recent establishment of 27 administrative bodies of protected areas, all of which are required to incorporate public consultation into management practices.     

Conceptual Models as Hypotheses in Monitoring Urban Landscapes

Many problems and challenges of ecosystem management currently are driven by the rapid pace and spatial extent of landscape change. Parks and reserves within areas of high human population density are especially challenged to meet the recreational needs of local populations and to preserve valued environmental resources. The complex problem of managing multiple objectives and multiple resources requires an enormous quantity of information, and conceptual models have been proposed as tools for organizing and interpreting this information. Academics generally prefer a bottom-up approach to model construction that emphasizes ecologic theory and process, whereas managers often use a top-down approach that takes advantage of existing information to address more pragmatic objectives. The authors propose a formal process for developing, applying, and testing conceptual models to be used in landscape monitoring that reconciles these seemingly opposing perspectives. The four-step process embraces the role of hypothesis testing in the development of models and evaluation of their utility. An example application of the process to a network of national parks in and around Washington, DC illustrates the ability of the approach to systematically identify monitoring data that would both advance ecologic theory and inform management decisions.     

Estimation of Landscape Potential for Construction of Surface-Flow Wetlands for Wastewater Treatment in Estonia

The main aim of this article is to demonstrate a method of complex landscape analysis in order to estimate the landscape suitability for the construction of surface-flow wetlands (SFW) for wastewater treatment. This is a multilevel suitability analysis from a more general regional (landscape) assessment based on a map of landscape types (1:100,000) toward a detailed analysis based on aerial orthophotos and detailed soil maps (1:10,000). The assessment scheme consists of landscape classification according to the physical-chemical properties of landscape factors (soil conditions, landforms, hydrogeology, expert decisions concerning landscape values, and suitability analysis). The partial suitability values of SFWs are derived by summarizing expert values for landscape factors (each ranging from -1 to +1). By multiplying the summarized partial suitability values with nature protection values (ranging from 0 to 1), we obtain the final suitability value for each landscape type. Any kind of nature protection area has been considered nonsuitable and excluded at regional-level analysis. The results of the regional analysis demonstrate that suitability is distributed relatively equally over the study area. The high suitability potential (classified as "very suitable") is relatively evenly distributed in lowland regions throughout the country. The share of "very suitable" and "suitable" areas in different counties varies from 5 to 23% and 7 to 49%, respectively. The detailed analysis based on aerial orthophotos showed that areas suitable for SFWs can also be found within the areas determined to be unsuitable based on the less detailed map of landscape types, whereas differences are much greater between settlements chosen for the detailed suitability analysis.     

Criteria for the Assessment of Sustainable Water Management

Pressure on the world’s water resources is increasing, restraining social and economic development in many countries, and threatening ecological values in others. In order to manage water resources in a more sustainable manner, new planning methodologies/processes for river basin management need to be developed. This study attempts to construct a set of useable normative criteria for the analysis and evaluation of such processes. The criteria were designed as a response to the lack of deductive approaches in the evaluation of methodologies and working procedures used in the context of river basin management, making it possible to highlight their potential for sustainable development. The criteria are based on the twin concepts of participation and integration. These concepts function as well-established dimensions of both sustainable development and sustainable river basin management, and they are of significant methodological relevance. A synthesis of the key aspects connected to the two concepts is undertaken, based on a broad literature review. Focus is laid on how in methodological terms, and in relation to regional water management, to achieve participation and integration in a decision-making or planning process. The criteria are concerned with how knowledge and values are integrated into the planning process and how commitment, legitimacy, or acceptance for the resulting plan is generated.     

Land Use Trends During Rapid Urbanization of the City of Aydin,Turkey

The favorable Turkish context for environmental legislation is undermined by a lack of public knowledge of the importance of sustainable development, a lack of coordination between experts in different professions and between government institutions, and a lack of the political will to make tough choices such as restricting the freedom of citizens to migrate to cities. This paper examines the specific implications of this context for the Aydin urban area in a rapidly urbanizing part of western Turkey. In the study area, urban and industrial areas both exhibited large proportional increases, largely at the expense of agricultural areas, and agricultural expansion occurred at the expense of natural areas. Compared to other areas of Turkey, the actual area of the increase was small, and the change for the study area as a whole was not striking because of the relatively recent history of urbanization and industrialization in Aydin. Nevertheless, the negative consequences of these changes may accelerate in the future if a strategy to control development and conversion of land use is not developed and implemented.     

Modification of Thermo-Mechanical Properties of Recycled PET by Vinyl Acetate (VAc) Monomer Grafting Using Gamma Irradiation

Vinyl acetate (VAc) monomer of different percentage was grafted onto the recycled polyethylene terephthalate (r-PET) films using gamma irradiation. The properties of these modified films were characterized by Fourier transform infrared spectroscopy (FTIR), mechanical properties testing (Tensile strength, Elongation at break), dynamic mechanical analysis (DMA) and thermo-gravimetric analysis (TGA). The Tensile Strength (TS) of the modified PET film increased by 132.25?% to the highest value of 50.12 MPa at 15% VAc monomer concentration at 3 kGy gamma dose, while the elongation at break (EB) decreased by 31.83?%. FTIR was used to investigate the molecular interaction of the modified films. TGA revealed that curve of the modified PET film shifted toward higher temperature region by 95?°C, which is very close to that of PET film made from virgin flakes. The results indicate that modified PET films of better mechanical and thermal properties were successfully prepared using VAc monomer grafting by gamma irradiation technique.     

Utilization of Industrial Wastes from Mining and Packaging Industries in Wood-Plastic Composites

The manufacturing industry produces a lot of different by-products and waste. In this research, the utilization of different industrial wastes as a part of wood-plastic composites was tested. Limestone waste and carton cutting waste were tested by replacing part of the reinforcing fibers of the composite with these materials. The materials were made with the extrusion process, and they were tested for their mechanical properties, water absorption and thickness swelling. The materials were also viewed with a scanning electron microscope. The results showed that both industrial wastes affected the properties of the composite. Mining waste in the composite improved the moisture properties, impact strength and hardness of the material. Carton cutting waste improved the impact strength remarkably.     

Climate variability and changes in the major cities of Bangladesh: observations,possible impacts and adaptation

High population density, inadequate infrastructure and low adaptive capacity have made the urban population of Bangladesh highly vulnerable to climate change. Trends in climate and climate-related extreme events in five major cities have been analyzed in this paper to decipher the variability and ongoing changes in urban Bangladesh. An analysis of 55 years (1958–2012) of daily rainfall and temperature data using nonparametric statistical methods shows a significant increase in annual and seasonal mean daily maximum and minimum temperatures in all five cities. A significant increase in climate-related extreme events, such as heavy rainfall events (>20 mm), hot days (>32 °C) and hot nights (>25 °C), is also observed. Climate model results suggest that these trends will continue through the twenty-first century. Vulnerability of urban livelihoods and physical structures to climate change is estimated by considering certainty and timing of impacts. It has been predicted that public health and urban infrastructures, viz. water and power supply, would be the imminent affected sectors in the urban areas of Bangladesh. Adaptation measures that can be adopted to mitigate the negative impacts of climate change are also discussed.