Hydrolysis of organic matter during autoclaving of commingled household waste

Commingled household waste (HW) that had a controlled composition was autoclaved at elevated pressures in the presence of saturated steam for one hour at the nominal temperature levels of 130 °C, 160 °C and 200 °C. The focus of this study was the impact of temperature/pressure on hydrolysis of organic matter during autoclaving and the extent of its hydrolysis. The pH decreased with autoclaving temperature with which it had a linear relationship, and ranged from 7.4 and 6 in floc, and 6.7 and 3.6 in steam condensate. Overall, organic matter solubilisation, as indicated by dissolved organic carbon, biological and chemical oxygen demands, and total dissolved solids, increased with temperature. Lignin did not appear to hydrolyse. Hemicellulose hydrolysed and degraded the most, followed by cellulose. The highest recoveries of hemicellulose and cellulose in solution were achieved at 160 °C, although the latter could be due to experimental error. The largest losses of hemicellulose and cellulose were recorded at 200 °C. The performance of the system in respect to hydrolysis was inferior compared to other hydrothermal systems, particularly those employing wet oxidation.     

Finished leather waste chromium acid extraction and anaerobic biodegradation of the products

Due to the amounts of chromium in the leachate resulting from leather leaching tests, chromium sulfate tanned leather wastes are very often considered hazardous wastes. To overcome this problem, one option could be recovering the chromium and, consequently, lowering its content in the leather scrap. With this objective, chromium leather scrap was leached with sulfuric acid solutions at low temperature also aiming at maximizing chromium removal with minimum attack of the leather matrix. The effects of leather scrap dimension, sulfuric acid and sodium sulfate concentration in the solutions, as well as extraction time and temperature on chromium recovery were studied, and, additionally, organic matrix degradation was evaluated. The best conditions found for chromium recovery were leather scrap conditioning using 25 mL of concentrated H₂SO₄/L solution at 293 or 313 K during 3 or 6 days. Under such conditions, 30–60 ± 5% of chromium was recovered and as low as 3–6 ± 1% of the leather total organic carbon (TOC) was dissolved. Using such treatment, the leather scrap area and volume are reduced and the residue is a more brittle material showing enhanced anaerobic biodegradability. Although good recovery results were achieved, due to the fact that the amount of chromium in eluate exceeded the threshold value this waste was still hazardous. Thus, it needs to be methodically washed in order to remove all the chromium de-linked from collagen.     

Assessing Sustainability at Multiple Scales in a Rotational Bushmeat Hunting System

Abstract: Results of many studies show unsustainable levels of bushmeat hunting across West/Central Africa. Nevertheless, these results are usually derived from snapshot sustainability indices in which critical parameters are often taken from the literature. Simple, more informative tools for assessing sustainability are needed. We evaluated the impact of bushmeat hunting across a range of temporal, spatial, and taxonomic scales in a comparison of different measures of sustainability. Over 15 months in 2002–2004 in and around a village close to Equatorial Guinea's Monte Alén National Park, we collected data via a village offtake survey, hunter‐camp bushmeat‐consumption diaries, hunter interviews, and following hunters during hunts. We compared 2003 data with a previous offtake survey (1998–1999) and interview reports back to 1990. In the past 14 years, average distance from the village at which hunters operated remained constant, with hunters switching back and forth between long‐established camps, although trapping effort increased. In the past 5 years, overall offtake and number of active hunters did not change substantially, although catch per unit effort (CPUE) decreased slightly. Although the proportion of the two most commonly trapped species (Cephalophus monticola and Atherurus africanus) and gun‐hunted primates increased in the offtake, species presumably less robust to trapping decreased slightly. Apparent sustainability in economic terms may be masking gradual local extirpation of more vulnerable species before and during this study. Our results suggest that changes in prey profiles and CPUE may be the most accurate indicators of actual sustainability; these indices can be monitored with simple village‐based offtake surveys and hunter interviews to improve community management of bushmeat hunting.     

The Importance of Natural Processes in Understanding Ecosystem Change: A Case Study of Limed Lakes

In order to determine what effects human activities have on natural processes, it is important to thoroughly understand those processes. Unfortunately, we know little about what natural processes are operating, and even less about how they have functioned historically. This paper discusses the importance of natural processes in affecting surface water acidification and the necessity for developing quantitative estimates of natural, as well as anthropogenic, contributions to the acidification of surface waters. A review of the literature and the analysis of chemistry data from six limed lakes in New York and Massachusetts have identified a number of possible processes that may play important roles in acidifying surface waters. At present, these processes are poorly understood and require further research. Once we have such knowledge, we will be able to clearly see the effects of human activities on natural processes and modify those activities in ways that will mitigate negative impact in a predictable manner.     

Isoprene emissions and climate

Biogenic volatile organic compounds (BVOCs) play an important role in atmospheric chemistry and the carbon cycle. Isoprene is quantitatively the most important of the non-methane BVOCs (NMBVOCs), with an annual emission of about 400–600 TgC; about 90% of this is emitted by terrestrial plants. Incorporating a mechanistic treatment of isoprene emissions within land-surface schemes has recently become a focus for the modelling community, the aim being to quantify the potential magnitude of associated climate feedbacks. However, these efforts are hampered by major uncertainties about why plants emit isoprene and the relative importance of different environmental controls on isoprene emission. The availability and reliability of observations of isoprene fluxes from different types of vegetation is limited, and this also imposes constraints on model development. Nevertheless, progress is being made towards the development of mechanistic models of isoprene emission which, in conjunction with atmospheric chemistry models, will ultimately allow improved quantification of the feedbacks between the terrestrial biosphere and climate under past and future climate states.     

The Role of Disaggregation of Asset Values in Flood Loss Estimation: A Comparison of Different Modeling Approaches at the Mulde River,Germany

In loss estimation there is a spatial mismatch of hazard data that are commonly modeled on an explicit raster level and exposure data that are often available only for aggregated administrative units. Usually disaggregation methods that use ancillary information to distribute lumped exposure data in a finer spatial resolution help to bridge this gap. However, the actual influence of different mapping techniques and ancillary data on the final loss estimation has not been analyzed yet. In this paper three methods are applied to disaggregate residential building assets using two kinds of land use/land cover (LULC) data. The resulting disaggregated assets are validated and compared using census data of the residential building number on the community and constituency level. In addition, the disaggregated assets are taken to estimate residential building losses due to the flood in August 2002 in 21 municipalities on the River Mulde in Saxony, Germany. Losses are calculated with the help of four loss models. In general, disaggregation helps to decrease the error variance within the loss estimation. It must, however, be stated that the application of sophisticated disaggregation methods does not lead to significant improvements compared to the straightforward binary method. Therefore more effort should instead be put into the provision of high-resolution LULC data. Finally, the remaining uncertainties in loss estimation are high and demand further improvements in all modeling aspects.