为防震减灾事业做好科普宣传--南京地震科学馆的建设与发展

从1989年江苏省第一届科普宣传周起,南京基准地震台都被列为宣传周期间重点对外开放单位.于是,南京地震台克服重重困难,筹建了地震科学馆.十多年来在江苏省地震局和有关单位的大力支持下,由最初腾出地震台的会议室和几间办公室发展到有530平方米的展室和多功能厅,展出内容也得到丰富.同时,地震科学馆在防震减灾宣传中取得了一定的社会效益.     

最严重的12方面环境问题--摘译自贾里德·戴蒙德《崩溃:社会如何选择失败还是成功》

在我看来。过去和现在社会所面临的最严重的环境问题．可以归纳为12个方面。其中8个过去早已凸显，另外4个只是最近才变得严重即能源、光合作用上限、有毒化学品和大气变化。     

石化企业的节水与废水资源化问题

讨论了石化企业如何充分利用水资源，不断提高节水意识。并结合石化企业的具体情况，用系统工程的分析方法，深入研究节水和水资源化的方法和途径。对这些问题，提出一些看法供大家参考。     

复合催化氧化技术对油气田压裂返排液的处理研究

酸化压裂作业废水是石油天然气生产过程中的主要污染源,它的污染成份复杂,有害物质浓度高,特别是含有胍胶和表面活性剂等高分子物质,具有高COD、高稳定度、高粘度的特点.本文通过对压裂液的来源、水质特征、治理现状等常用方法的分析,确定了物理化学脱稳,过滤、O3/H2O2复合催化氧化、深度氧化的达标治理工艺路线.经过处理后的压裂液澄清透明,达到国家二级排放标准(GB8978-96).     

城市生活垃圾场处理技术模糊综合评价

通过对一个待建的城市生活垃圾场处理技术的综合分析，建立一个相对完整的指标体系，然后用模糊数学的方法，对指标体系进行量化、归一化，得到一个通用的评价模型，并运用此模型对该垃圾的垃圾处理方式进行评价，最后提出卫生填埋是当前较为合理的处理方式。     

难切削零件的冷挤压工艺

以“尾钉”为例 ,分析高温合金的难切削工艺特点 ,设计合理可行的冷挤压工艺     

耐热粉末铝合金筒体热旋成形试验

介绍了喷射沉积耐热铝合金管坯经挤压变形 ,变薄旋压筒体的研制过程 ;重点论述了热旋成形筒体的工艺路线。试验探讨了耐热铝合金的旋压温度为 35 0～ 45 0℃ ,道次变薄率约为2 0 % ,累计变薄率约 5 0 % ,需中间退火 ,退火温度宜取 35 0℃。热旋结果认为 ,喷射沉积耐热粉末铝合金铸坯直接热旋成形困难 ,需经挤压比大于 4的变形致密 ,有助于热旋成形。耐热粉末铝合金挤压坯加热变薄旋压 ,应采用小压下量多道次的变形过程 ,逐渐细化晶粒组织 ,才能旋出综合性能良好的筒形件。     

BP网络应用于大气环境监测点的优选

为了对大气环境监测点进行优化选择 ,以大气质量分级标准为训练样本 ,构造BP网络进行训练 ,用训练好的BP网络对某地的大气环境监测采样点进行了优选 ,并与物元分析法优选结果进行比较。结果表明 ,BP网络用于环境测点优选具有较好的客观性和应用性     

Production of laccase by Coriolus versicolor and its application in decolorization of dyestuffs: (Ⅱ) Decolorization of dyes by laccase containing fermentation broth with or without self-immobilized mycelia

The capability of decolorization for commercial dyes by Coriolus versicolur fermentation broth containing laccase with or without immobilized mycelium was evaluated.With cell-free fermentation broth containing laccase,high decolorization ratio was achieved for acid orange 7,but not for the other dyes concerned.The immobilized mycelium was proved to be more efficient than the cell-free system.All the four dyestuffs studied were found being decolourized with certain extent by immobilized mycelium.The repeated-batch decolorization was carried out with satisfactory results.The experimental data showed that the continuous decolorization of wastewater from a printing and dyeing industry was possible by using self-immobilized C.Versicolor.     

The effect of heating temperature of thin film transistor-liquid crystal display (TFT-LCD) optical waste glass as a partial substitute partial for clay in eco-brick

In order to fulfill the current WEEE directives, the traditional approach to manage thin film transistor-liquid crystal display (TFT-LCD) waste glass is inadequate. It is a serious opportunity to achieve resource conservation, reduction, stabilization and safety of management of TFT-LCD in the near future. To assist in achieving these goals, this study investigated the sintering characteristics and material properties of TFT-LCD waste glass, which can be pulverized and ground and subsequently blended with clay, at various substitution levels (0–40%) and finally fired from 800 °C to 1000 °C to make eco-brick. The brick thus produced was analyzed to determine variations in weight losses on ignition, 24-h absorption, bulk density, shrinkage, compressive strength and microstructure changes. The results for specific gravity, water adsorption, and compressive strength revealed that bricks made from mixtures containing TFT-LCD waste glass met the general requirements for bricks. The advantages of less water absorption, less weight loss on ignition, and a gain in compressive strength in the clay-TFT-LCD waste glass bricks should encourage the use of TFT-LCD waste glass as a brick additive.