实现可持续的城市发展：从褐色地带到环境管理

城市的空间形状和结构，是一个与政策关联度越来越大的主题 .在某些经济合作与发展组织 (OECD)国家，如土耳其和墨西哥，城市人口快速增长仍然是一个问题，但就绝大部分而言，成员国所关注的已经不是城市的人口规模，而是城市所占的实际面积 .最常见的情况下是由于市场和政策力量综合作用而出现的人口疏散这种现象产生多种非预期的后果 .其中包括随着工业和制造业活动衰落或往城市中心外地区迁移而出现的很多工业财产的废弃 .这种财产常被称为“褐色地带” .对于 OECD的工作来说，褐色地带遗址是被认为由于前工业、商业或政府的利用而遭到了污染或可能遭到污染因而被弃置不用的土地和建筑物 .     

Use of biosurfactants from urban wastes compost in textile dyeing and soil remediation

A compost isolated humic acid-like (cHAL) material was pointed out in previous work for its potential as auxiliary in chemical technology. Its potential is based on its relatively low 0.4gL(-1) critical micellar concentration (cmc) in water, which enables cHAL to enhance the water solubility of hydrophobic substances, like phenanthrene, when used at higher concentrations than 0.4gL(-1). This material could be obtained from a 1:1 v/v mixture of municipal solid and lignocellulosic wastes composted for 15 days. The compost, containing 69.3% volatile solids, 39.6% total organic C and 21C/N ratio, was extracted for 24h at 65 degrees C under N2 with aqueous 0.1molL(-1) NaOH and 0.1molL(-1) Na4P2O7, and the solution was acidified to separate the precipitated cHAL in 12% yield from soluble carbohydrates and other humic and non-humic substances. In this work two typical applications of surfactants, i.e., textile dyeing (TD) and soil remediation by washing (SW), were chosen as grounds for testing the performance of the cHAL biosurfactant against the one of sodium dodecylsulfate (SDS), which is a well established commercial synthetic surfactant. The TD trials were carried out with nylon 6 microfiber and a water insoluble dye, while the SW tests were performed with two soils contaminated by polycyclic aromatic hydrocarbons (PAH) for several decades. Performances were rated in the TD experiments based on the fabric colour intensity (DeltaE) and uniformity (sigmaDeltaE), and in the SW experiments based on the total hydrocarbons concentration (CWPAH) and on the residual surfactant (Cre) concentrations in the washing solution equilibrated with the contaminated soils. The results show that both cHAL and SDS exhibit enhanced performance when applied above their cmc values. However, while in the TD case a significant performance effect was observed at the surfactants cmc value, in the SW case the required surfactants concentration values were equivalent to 25-125xcmc for cHAL and to 4-22xcmc for SDS. The vis-a-vis comparison of the two surfactants gave the following results: in the TD case the cHAL biosurfactant at 0.4gL(-1) yields good colour intensity and equal colour uniformity as SDS at 5gL(-1), in the SW case cHAL was found to enhance CWPAH by a factor of 2-4 relative to SDS with one soil, whereas with the other soil the two surfactants behaved similarly. The Cre data, however, showed that both soils absorbed by far more SDS (68-95%) than cHAL (12-54%). The results point out intriguing technological and environmental perspectives deriving from the use of compost isolated biosurfactants in the place of synthetic surfactants.     

A retrospective study on dioxins and dioxin-like polychlorinated biphenyls in milk and dairy products from the Latium region (Italy) over a 7-year study period (2011–2017)

Environmental Science and Pollution Research - This study reports the data of polychlorinated dibenzo-p-dioxins (PCDDs), -furans (PCDFs), and polychlorinated biphenyls dioxin-like (dl PCBs)...     

Estimation of the contribution of a municipal waste incinerator to the overall emission and human intake of PCBs in Wilrijk, Flanders

The contribution of the emission of PCBs by a municipal waste incinerator in Wilrijk, a relatively industrialized district in the largest city of Flanders, to the total emission to air and to the total human intake was estimated. Therefore it was compared to the emission of PCBs by evaporation from PCB containing applications (transformers, capacitors, paint, ink, etc.) and to the intake of PCBs with food. As there was a lack of PCB data from the incinerator, the PCB emission concentration was estimated using three different approaches. A PCB measurement of the incinerator emission, performed later on, fell within the predicted range of 0.0004-0.005 ng TEQ/Nm3. Emission of PCBs from PCB containing applications and intake from food were deduced from information available on Flemish and European level. The results indicate a PCB contribution from the incinerator to local emissions between 0.3% and 3% of the emission from PCB containing applications and a contribution to human intake less than 6 x 10(-4)% of the intake from food.     

Evaluation of drinking water treatment and quality in Takua Pa, Thailand

After 2004 Indian Ocean Tsunami, which hit and devastated several Countries in Southeast Asia, University of Brescia and Mahidol University started a project on water monitoring and treatment for drinking purposes in Takua Pa district (Thailand), the most damaged by the tsunami. In particular, this paper presents the results of a study conducted to evaluate the effectiveness of Takua Pa drinking water treatment plant and to identify actions that could be adopted to improve its performances. The results show that, even if the effluent usually meets Thai guide values, except for pH which is already too acid in the influent, the plant needs several structural and managerial improvements, such as filtration and sedimentation upgrade, coagulation/flocculation and final disinfection re-organization, use of proper registers to better plan and control employees activities. Moreover, it was determined that water quality in the distribution network is characterized by turbidity and organic matter values higher than those evaluated in the plant effluent.     

Introduction to the Issue

We are pleased to introduce this second issue of the Reviewof Environmental Economics and Policy. Like every issue, thisone includes several articles, a focused symposium, and a setof regular features. In the first of three articles, John Graham describes "The EvolvingRegulatory Role of the U.S. Office of Management and Budget,"where he was the "regulatory czar" as administrator of the Officeof Information and Regulatory Affairs (OIRA) from 2001 to 2006.In his essay, Graham responds to the perception of OMB as antiregulatoryby describing the history of OIRA's proactive     

Dragutin T. Mihailović, Igor Balaž and Darko Kapor: Time and methods in environmental interfaces modelling: personal insights

Environmental Fluid Mechanics -     

Oxidative degradation of chlorophenol derivatives promoted by microwaves or power ultrasound: a mechanism investigation

Background, aim, and scope

Phenols are the most common pollutants in industrial wastewaters (particularly from oil refineries, resin manufacture, and coal processing). In the last two decades, it has become common knowledge that they can be effectively destroyed by nonconventional techniques such as power ultrasound (US) and/or microwave (MW) irradiation. Both techniques may strongly promote advanced oxidation processes (AOPs). The present study aimed to shed light on the effect and mechanism of US- and MW-promoted oxidative degradation of chlorophenols; 2,4-dichlorophenoxyacetic acid (2,4-D), a pesticide widespread in the environment, was chosen as the model compound.

Materials and methods

2,4-D degradation by AOPs was carried out either under US (20 and 300 kHz) in aqueous solutions (with and without the addition of Fenton reagent) or solvent-free under MW with sodium percarbonate (SPC). All these reactions were monitored by gas chromatography–mass spectrometry (GC–MS) analysis and compared with the classical Fenton reaction in water under magnetic stirring. The same set of treatments was also applied to 2,4-dichlorophenol (2,4-DCP) and phenol, the first two products that occur a step down in the degradation sequence. Fenton and Fenton-like reagents were employed at the lowest active concentration.

Results

The effects of US and MW irradiation were investigated and compared with those of conventional treatments. Detailed mechanisms of Fenton-type reactions were suggested for 2,4-D, 2,4-DCP, and phenol, underlining the principal degradation products identified. MW-promoted degradation under solvent-free conditions with solid Fenton-like reagents (viz. SPC) is extremely efficient and mainly follows pyrolytic pathways. Power US strongly accelerates the degradation of 2,4-D in water through a rapid generation of highly reactive radicals; it does not lead to the formation of more toxic dimers.

Discussion

We show that US and MW enhance the oxidative degradation of 2,4-D and that a considerable saving of oxidants and cutting down of reaction times is thereby achieved. The results support the interpretation of previously published data and improve the understanding of the factors of direct degradation along different pathways.

Conclusions

Oxidative pathways for 2,4-D, 2,4-DCP, and phenol were proposed by a careful monitoring of the reactions and detection of intermediates by GC–MS.

Recommendations and perspectives

The understanding of the factors that affect chlorophenols degradation along different pathways may facilitate the optimization of the treatment. Type of energy source (US or MW), power, and frequency to be applied could be designed in function of the operative scenario (amount of pollutant in soil, water, or oils).