What can we learn from monitoring PCBs in the European eel? A Belgian experience

Between 2000 and 2007 pooled muscle tissue samples of the European eel (Anguilla anguilla) from 48 sites in Flanders (Belgium) were analysed for 30 polychlorinated biphenyl (PCB) congeners. There was a large variation between individual sites (range 11-7752 ng/g wet weight (ww) for the sum of the ICES 7 PCBs), eels from the River Meuse basin (mean 1545 ng/g ww) being considerably more polluted than those from the River Scheldt (615) and IJzer (61) basins. Overall, PCB 153, PCB 138 and PCB 180 were the most prominent congeners, however PCB patterns varied between the monitored locations. Analysis of the weight percentage of congeners demonstrates obvious differences in PCB composition between sites, indicating differential sources of pollution. Due to the variation in patterns, atmospheric fallout does not seem to be the main source of the PCB spread, but instead both local and upstream sources linked to industrial activities seem to be the main cause for PCB presence in Flanders. Considering the levels of the Sum 7 PCBs, eels are not compliant with the Belgian legal limits for consumption (75 ng/g ww) in 71% of the sites. Regular consumption of eels from polluted sites leads to a considerable excess of the WHO Acceptable Daily Intake value. Consumption of wild eels should by all means be prevented, as it presents risks for human health, especially for local anglers consuming their catch.     

Planning routes around the world: International evidence for southern route preferences

Three studies test whether the southern route preference, which describes the tendency for route planners to disproportionately select south- rather than north-going routes, can be attributed to regional elevation patterns; specifically, we ask whether this effect replicates in three topographically disparate international regions, one of which is characterized by higher elevations to the north and lower to the south (Padua, Italy), and two characterized by higher elevations to the south and lower to the north (Enschede, Netherlands; Sofia, Bulgaria). In all cases, we found strong evidence that route planners disproportionately select south- rather than north-going routes at rates exceeding chance. We conclude that the southern route preference is driven by strong associations between canonical direction and perceived effort of route traversal; these effects are somewhat perplexing given that such associations are not founded in the reality of physical space.     

The adsorption of short single-stranded DNA oligomers to mineral surfaces

We studied the adsorption of short single-stranded deoxyribonucleic acid (ssDNA) oligomers, of approximately 30 nucleotides (nt) in length, of varying sequence, adenine + guanine + cytosine (AGC) content, and propensity to form secondary structure, to equal surface area samples of olivine, pyrite, calcite, hematite, and rutile in 0.1 M NaCl, 0.05 M pH 8.1 KHCO₃ buffer. Although the mineral surfaces have widely varying points of zero charge, under these conditions they show remarkably similar adsorption of ssDNA regardless of oligomer characteristics. Mineral surfaces appear to accommodate ssDNA comparably, or ssDNA oligomers of this length are able to find binding sites of comparable strength and density due to their flexibility, despite the disparate surface properties of the different minerals. This may partially be due charge shielding by the ionic strength of the solutions tested, which are typical of many natural environments. These results may have some bearing on the adsorption and accumulation of biologically derived nucleic acids in sediments as well as the abiotic synthesis of nucleic acids before the origin of life.     

From Policy Document to Implementation: Organizational Routines as Possible Barriers to Mainstreaming Climate Adaptation

This paper aims to understand the role of organizational routines as possible barriers to the mainstreaming of climate adaptation at the implementation stage. While the mainstreaming of climate adaptation into policy documents is relatively easy, the implementation of these policies seems to be more problematic. Barriers to climate adaptation often occur during this stage as the implementation of the policies is generally undertaken by other actors than the policy-makers. These actors act based on organizational routines. As organizational routines aim to provide stability, they tend to be reaffirmative. Reorganizing the resources and practices of these actors to initiate mainstreaming then proves difficult. Consequently, the routines could prevent change that might be necessary to address new policy objectives such as climate adaptation. An analytical framework consisting of four self-reinforcing mechanisms is used to understand and explain why and how organizational routines can hamper the mainstreaming of climate adaptation during implementation. A case study is used to illustrate organizational routines as possible barriers. The paper concludes by stating that to optimize the possibilities of mainstreaming climate adaptation, a change in routines is necessary. In order to stimulate change in organizational routines, the focus should be on reflecting on existing routines, legitimacy building and learning.     

Significant rainfall decreases and variations of the atmospheric circulation in the Mediterranean (1950–2000)

This paper aims at identifying the link between significant rainfall decreases (1950–2000) in the Mediterranean basin and the atmospheric circulation at the 500 hPa level. The months and seasons of the subregions with significant rainfall decrease during this period have been identified previously (Norrant and Douguédroit, Theor Appl Climatol 83(1–4):89–106, 2006): October in the Mediterranean Iberia, March in the Atlantic Iberia, January and winter in Greece, and winter in the Near East. Canonical Correlation Analyses based on the monthly and daily data records from 62 rainfall stations and 138 grid points at the 500 hPa level over a Euro-Atlantic window were first calculated to define the TeleConnection Patterns explaining significant regional rainfall decreases. Then, 500 hPa level weather types (ZWTs) of the rainy days with important or little rainfall associated with each Teleconnection Pattern were identified in each subregion. Rainfall-causing disturbances from the Atlantic reach Iberia directly; some of them are regenerated if they reach the Mediterranean. Other disturbances are generated locally near Greece and the Near East (Meteorological Office in Weather in the Mediterranean I: general meteorology, Her Majesty’s Stationery Office, London, 1962). The relationship between significant rainfall decreases and the corresponding 500 hPa level appears to be a nonlinear phenomenon. In all of the studied subregions, a break during the 1970s separates two subperiods differing significantly from each other. Rainfall decrease is due to the higher frequency of important rainfall ZWTs over low rainfall ZWTs, during the first period, which the opposite is true during the second period. Such an inversion could be partially linked with the prevailing North Atlantic Oscillation-positive phase during the last quarter of the twentieth century.     

Lead (Pb) quantification in potable water samples: implications for regulatory compliance and assessment of human exposure

Assessing the health risk from lead (Pb) in potable water requires accurate quantification of the Pb concentration. Under worst-case scenarios of highly contaminated water samples, representative of public health concerns, up to 71–98 % of the total Pb was not quantified if water samples were not mixed thoroughly after standard preservation (i.e., addition of 0.15 % (v/v) HNO₃). Thorough mixing after standard preservation improved recovery in all samples, but 35–81 % of the total Pb was still un-quantified in some samples. Transfer of samples from one bottle to another also created high errors (40–100 % of the total Pb was un-quantified in transferred samples). Although the United States Environmental Protection Agency’s standard protocol avoids most of these errors, certain methods considered EPA-equivalent allow these errors for regulatory compliance sampling. Moreover, routine monitoring for assessment of human Pb exposure in the USA has no standardized protocols for water sample handling and pre-treatment. Overall, while there is no reason to believe that sample handling and pre-treatment dramatically skew regulatory compliance with the US Pb action level, slight variations from one approved protocol to another may cause Pb-in-water health risks to be significantly underestimated, especially for unusual situations of “worst case” individual exposure to highly contaminated water.     

Monitoring of heavy metal levels in roadside dusts of Thessaloniki, Greece in relation to motor vehicle traffic density and flow

In recent years, the level of heavy metal pollution in urban areas has been of considerable concern. The principal source has been attributed to the motor vehicle and increasing inner city congestion, which has lead to a change and enlargement of transport stop-start zones. These areas of high traffic density are associated with an increased release of heavy metals into the adjacent residential or commercial areas. Seventy-five roadside dust samples were collected throughout the inner city and by-pass motorway areas of Thessaloniki, Northern Greece. Samples were taken from arterial, major and minor roads, as well as the ring road, to compare and contrast the levels of heavy metals, namely Cu, Zn, Cd, Mn and Pb. Flame Atomic Absorption Spectroscopy (FAAS) was developed to quantitatively determine concentrations of both total element and geochemical fractionation, within the two dust particulate fraction sizes <75 microm and 75-125 microm. Acid digestion using Aqua Regia (3:1 conc. HCl:HNO(3)) was employed for the total elemental analysis, a method that was validated through the use of certified reference materials (CRM). Fractionation studies involved a three-step sequential extraction method performed on five selected samples (representatives of high, mid and low total elemental concentrations). The resultant solutions were analysed for lead and zinc levels to ascertain fractionation throughout the different geochemical fractions, thus assessing bioavailability.It was found that congestion/stop-start traffic patterns did influence and have led to increased levels of heavy metal deposition along inner city roads compared to levels observed on the new relief ring road. Dust particulate fraction sizes were only found to show statistically significant differences in cadmium and manganese, at the probability P < 0.001 or 99.9% confidence limit. Both Cd and Mn showed higher total levels in the smaller fraction sizes (<75 microm), implying that their major release source is exhaust emissions. There were no significant differences in the other elements, at the P > 0.05 or 95% confidence limit. Road type was seen to have little affect on cadmium and manganese, though lead, copper and zinc were all found to show higher levels on the inner city routes. This can be related back to the wear-and-tear of vehicle components as a result of the stop-start traffic patterns (brake pads etc). Both Pb and Zn have shown to be in chemical forms that are bio available to ecosystems.     

Dioxin- and POP-contaminated sites—contemporary and future relevance and challenges

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.     

A decision support system for wet soil cleaning

Newly developed software can predict the essential characteristics of the sand product resulting from the ex-situ washing of contaminated soil, dredging sludge or breaker sand. The system was designed for the Dutch situation and it works on the basis of readily available information. The primary output of the system is an assessment of the reusability of the sand product, which is obtained by comparing the prediction of the residual contamination and engineering quality with accepted levels and standards for building materials. The system also provides a ranking of potential applications for the sand with respect to treatment cost, the amount of recycled material or the environmental quality of the product. The software integrates soil cleaning expertise and unit process modelling in a way that allows varying levels of refinement of input data, ranging from a simple identification of the pollution source to a detailed particle size distribution of the contaminated soil. Tests on a database containing information on 117 processed batches of soil, dredging sludge and breaker sand show an 80% success rate in predicting cleanability, even though the input contamination levels were predominantly taken from (relatively inaccurate) in-situ data.