TOPHAZOP: a knowledge-based software tool for conducting HAZOP in a rapid, efficient yet inexpensive manner

Hazard and operability (HAZOP) studies constitute an essential step in the risk analysis of any chemical process industry and involve systematic identification of every conceivable abnormal process deviation, its causes and abnormal consequences. These authors have recently proposed optHAZOP as an alternative procedure for conducting HAZOP studies in a shorter span of time than taken by conventional HAZOP procedure, with greater accuracy and effectiveness [Khan, F. I. and Abassi, S. A., optHAZOP. An effective and efficient technique for hazard identification and assessment Journal of Loss Prevention in the Process Industries, 1997, 10, 191–204]. optHAZOP consists of several steps, the most crucial one requires use of a knowledge-based software tool which would significantly reduce the requirement of expert man-hours and speed up the work of the study team. TOPHAZOP (Tool for OPTmizing HAZOP) has been developed to fulfil this need.

The TOPHAZOP knowledge-base consists of two main branches: process-specific and general. The TOPHAZOP framework allows these two branches to interact during the analysis to address the process-specific aspects of HAZOP analysis while maintaining the generality of the system. The system is open-ended and modular in structure to make easy implementation and/or expansion of knowledge. The important features of TOPHAZOP and its performance on an industrial case study are described.     

Development of Layered Sediment Structure and its Effects on Pore Water Transport and Hyporheic Exchange

Hyporheic exchange is known to provide an important control on nutrient and contaminant fluxes across the stream-subsurface interface. Similar processes also mediate interfacial transport in other permeable sediments. Recent research has focused on understanding the mechanics of these exchange processes and improving estimation of exchange rates in natural systems. While the structure of sediment beds obviously influences pore water flow rates and patterns, little is known about the interplay of typical sedimentary structures, hyporheic exchange, and other transport processes in fluvial/alluvial sediments. Here we discuss several processes that contribute to local-scale sediment heterogeneity and present results that illustrate the interaction of overlying flow conditions, the development of sediment structure, pore water transport, and stream-subsurface exchange. Layered structures are shown to develop at several scales within sediment beds. Surface sampling is used to analyze the development of an armor layer in a sand-and-gravel bed, while innovative synchrotron-based X-ray microtomography is used to observe patterns of grain sorting within sand bedforms. We show that layered bed structures involving coarsening of the bed surface increase interfacial solute flux but produce an effective anisotropy that favors horizontal pore water transport while limiting vertical penetration.     

Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

Best management practices compliance monitoring approaches for forestry in the eastern United States

Many of the eastern states that have published best management practices (BMPs) or forest management guidelines have also developed compliance monitoring programs to assess the application of these BMPs or guidelines on public and private forest land. The approaches among these states to collecting on-site monitoring data (measuring compliance) and evaluating sites are variable. A survey of eastern states found that almost all southern states monitor application of BMPs, but proportionally fewer of the northern states have established compliance monitoring programs. The state forestry agencies provide the leadership for these programs in most of the eastern states. States that monitor tend to evaluate all public and private forest landowner categories located within their states. In general, northern states monitor a broader array of site resources (e.g., cultural resources, visual quality) as compared to southern states which focus on water quality and wetlands protection. However, northern states focus their monitoring on timber harvesting, forest road construction and maintenance as compared to southern states which tend to monitor a broader array of forest management activities (e.g., site preparation, reforestation). When selecting sites for monitoring, the most common approach is to select some sites from all landowner categories within the state. Many states do not specify any criteria to identify sites for monitoring so that all sites have an equal chance for selection. Some states do use specific criteria to filter sites for monitoring, most commonly size of forest management activity and proximity to water.     

Measurements of PCB Fluxes into the Atmosphere from a Site Receiving Stabilized Dredged Material

A 50 ha known contaminated site in Bayonne, New Jersey, U.S.A. is permitted to receive up to 3 × 10⁶ m³ of sediment dredged from navigation channels in the New York/New Jersey Harbor. Much of the sediment is expected to contain low to moderate concentrations of industrial and agricultural chemicals, including Polychlorinated Biphenyls (PCBs). The dredged material brought to the site is stabilized with cement and then placed as a capping and grading layer. The flux of PCBs from drying stabilized dredged material has been estimated from measurements of PCB air concentrations at two heights above the ground along with micrometeorological observations. A statistically significant gradient in PCB concentrations has been consistently measured in the first 3 m above the ground. Observed PCB fluxes were highest over freshly placed stabilized dredged sediment and decreased as it cured. The highest flux observed in this study was 7214 ng/m²/h, but during subsequent sampling intervals at the same site, the flux estimates decreased by an order of magnitude over a 5-day interval.     

Application of the operating window concept to remediation‐option selection

An Erratum has been published for this article in Remediation 14(4) 2004, 141. The selection of remediation options for the management of unacceptable risks at contaminated sites is hindered by insufficient information on their performance under different site conditions. Therefore, there is a need to define “operating windows” for individual remediation options to summarize their performance under a variety of site conditions. The concept of the “operating window” has been applied as both a performance optimization tool and decision support tool in a number of different industries. Remediation‐option operating windows could be used as decision support tools during the “options appraisal” stage of the Model Procedures (CLR 11), proposed by the Environment Agency (EA) for England and Wales, to enhance the identification of “feasible remediation options” for “relevant pollutant linkages.” The development of remediation‐option operating windows involves: 1) the determination of relationships between site conditions (“critical variables”) and option performance parameters (e.g., contaminant degradation or removal rates) and 2) the identification of upper‐ and lower‐limit values (“operational limits”) for these variables that define the ranges of site conditions over which option performance is likely to be sufficient (the “operating window”) and insufficient (the “operating wall”) for managing risk. Some research has used case study data to determine relationships between critical variables and subsurface natural attenuation (NA) process rates. Despite the various challenges associated with the approach, these studies suggest that available case study data can be used to develop operating windows for monitored natural attenuation (MNA) and, indeed, other remediation options. It is envisaged that the development of remediation‐option operating windows will encourage the application of more innovative remediation options as opposed to excavation and disposal to landfill and/or on‐site containment, which remain the most commonly employed options in many countries. © 2004 Wiley Periodicals, Inc.     

Gender in the boss–subordinate relationship: a Nigerian study

The present study examines the interaction effect of gender of both subordinates and supervisors on subordinates' perception of differentiation of boss–subordinate relationship in an African setting. Data was collected from a total of 60 boss–subordinate dyads in four‐sex combinations obtained through a survey of a large five‐star hotel in Abuja, Nigeria. Results revealed that subordinates in opposite‐sex dyads perceived better quality of exchange than those in same‐sex dyads. The strongest quality of exchange was perceived in male boss–female subordinate dyad, while the weakest was perceived in female boss–female subordinate dyad. This emphasizes the importance of gender in the differentiation of boss–subordinate relationships in an African setting. Copyright © 2004 John Wiley & Sons, Ltd.     

Evidence of integration of air quality management in the decision-making processes and procedures of English local government

The air quality management (AQM) framework in the UK is a risk management approach using effects-based objectives for air pollutants to determine the need for action. The Environment Act 1995 required a National Air Quality Strategy to be published, setting out health-based standards and objectives for eight pollutants, of which seven are to managed at a local scale. Because of the variety of sources of air pollution, if the AQM process is to succeed in the long term, solutions to identified problems will be required from transport, land use and economic planning sectors of local government in liaison with various other agencies, regulators and outside bodies. As such the task is inherently multi-disciplinary and an integrated, collaborative approach will be necessary. Although this observation is now fairly well documented, there is still little guidance relating to how, in relation to air quality management, integration can actually be accomplished. This paper presents some observations from case studies undertaken as part of a longer-term research study and in particular focuses on the identified problems of involving non-air-quality professionals in a highly technical scientific process. Various approaches to the collaborative aspects of air quality management will be presented. These case studies represent local authorities of different sizes in different political and organisational situations facing a range of air quality challenges. The creation of project teams or task forces is judged particularly useful for local air quality management. Methods that could be applied more widely include appointing individuals as integrators, and rotation of key personnel.     

Political will,political skill,and political behavior

The current study used Mintzberg's (1983) conceptualization of political will and political skill to evaluate the predictors and consequences of political behavior at work. As elements of political will, we hypothesized that need for achievement and intrinsic motivation would predict the use of political behavior at work. Furthermore, we argued that political skill would moderate the relationship between political behavior and emotional labor. Data gathered from employees (N = 193) representing a wide array of organizations substantiated the proposed relationships. Specifically, need for achievement and intrinsic motivation were positively associated with political behavior. In turn, those opting to employ political behavior at work experienced a higher degree of emotional labor, but this relationship was found to operate differently at low and high levels of political skill. Specifically, emotional labor was a consequence of political behavior for those low in political skill, but emotional labor reactions from political behavior were neutralized for individuals high in political skill. Implications of these results, strengths and limitations, and directions for future research are discussed. Copyright © 2005 John Wiley & Sons, Ltd.