Water Quality during Development and Apportionment of Pollution from Rivers in Tapeng Lagoon, Taiwan

This work investigated water samples collected from Tapeng Lagoon, Taiwan. Factor analysis was conducted to explain the characteristics and the variation in the quality of water during the disassembly of oyster frames and fishery boxes. The result shows that the most important latent factors in Tapeng Lagoon are the ocean factor, primary productivity factor, and the fishery pollution factor. Canonical discriminant analysis is applied to identify the source of pollution in neighboring rivers outside Tapeng Lagoon. The two constructed discriminant functions (CDFs) showed markedly contribution to all discriminant variables, and that total nitrogen, algae, dissolved oxygen and total phosphate, combined in the nutrient effect factor. The recognition capacities in these two CDFs were 95.6%, 4.4%, respectively. The water quality in the Kaoping river most strongly determined that in the Tapeng Lagoon the best is. And disassembling the oyster frames and fishery boxes improves the water quality markedly. However, environmental topographic conditions indicate that strengthening stream pollution prevention and to constructing another entrance to the ocean are the best approaches for improving the quality of water in Tapeng Lagoon, especially by reducing eutrophication. These approaches and results yield useful information concerning habitat recovery and water resource management.     

A two-stage cyclone using microcentrifuge tubes for personal bioaerosol sampling

Personal aerosol samplers are widely used to monitor human exposure to airborne materials. For bioaerosols, interest is growing in analyzing samples using molecular and immunological techniques. This paper presents a personal sampler that uses a two-stage cyclone to collect bioaerosols into disposable 1.5 ml Eppendorf-type microcentrifuge tubes. Samples can be processed in the tubes for polymerase chain reaction (PCR) or immunoassays, and the use of multiple stages fractionates aerosol particles by aerodynamic diameter. The sampler was tested using fluorescent microspheres and aerosolized fungal spores. The sampler had first and second stage cut-off diameters of 2.6 microm and 1.6 microm at 2 l min(-1)(geometric standard deviation, GSD = 1.45 and 1.75), and 1.8 microm and 1 microm at 3.5 l min(-1)(GSD = 1.42 and 1.55). The sampler aspiration efficiency was >or=98% at both flow rates for particles with aerodynamic diameters of 3.1 microm or less. For 6.2 microm particles, the aspiration efficiency was 89% at 2 l min(-1) and 96% at 3.5 l min(-1). At 3.5 l min(-1), the sampler collected 92% of aerosolized Aspergillus versicolor and Penicillium chrysogenum spores inside the two microcentrifuge tubes, with less than 0.4% of the spores collecting on the back-up filter. The design and techniques given here are suitable for personal bioaerosol sampling, and could also be adapted to design larger aerosol samplers for longer-term atmospheric and indoor air quality sampling.     

Increasing collaboration between China and India in the environmental sciences to foster global sustainability

As the two largest countries by population, China and India have pervasive effects on the ecosphere. Because of their human population size and long international boundary, they share biodiversity and the threats to it, as well as crops, pests and diseases. We ranked the two countries on a variety of environmental challenges and solutions, illustrating quantitatively their environmental footprint and the parallels between them regarding the threats to their human populations and biodiversity. Yet we show that China and India continue to have few co-authorships in environmental publications, even as their major funding for scientific research has expanded. An agenda for collaboration between China and India can start with the shared Himalaya, linking the countries’ scientists and institutions. A broader agenda can then be framed around environmental challenges that have regional patterns. Coordinated and collaborative research has the potential to improve the two countries’ environmental performance, with implications for global sustainability.     

乌鲁木齐市大气中二氧化硫的灰色预测

根据灰色系统理论,联系乌鲁木齐市大气环境的实际状况,建立了精度检验为一级的灰色预测模型,经模型检验其精度完全满足要求。对乌鲁木齐大气中的SO2值进行预测分析的结果表明,乌鲁木齐市大气中SO2值呈上升的趋势,在未来几年中,乌鲁木齐市大气中SO2的预测值超过国家三级标准值(即大气中SO2的质量浓度年均值≤0.10mg/m3),这种发展趋势应引起有关部门的关注。     

环氧丙烷生产废液中1,2 -二氯丙烷的回收

介绍了从环氧丙烷生产废液中回收1,2-二氯丙烷的新方法。采用常压精馏、减压精馏、共沸精馏工艺分离环氧丙烷生产废液中的1,2-二氯丙烷。实验结果显示,共沸精馏工艺的效果最好;在含有一定量的共沸剂、釜温100℃、顶温86℃、回流比为1的条件下,塔顶馏分中1,2-二氯丙烷的质量分数可达到98％以上,1,2-二氯丙烷的回收率可达到97％以上。     

生物还原-化学沉淀法自烟气中的SO2制备ZnS

采用生物还原—化学沉淀法自烟气中的SO2制备ZnS,将含有Zn(OH)2杂质的粗品ZnS通过化学提纯制得高纯度ZnS。实验结果表明,采用NH4C l-NH3.H2O混合液对含有Zn(OH)2杂质的粗品ZnS进行提纯的优化条件为:每500m g粗品ZnS加入NH4C l与NH3.H2O摩尔比为1∶1、两组分浓度均为3.0m o l/L的10mLNH4C l-NH3.H2O混合液。X射线衍射分析表明,提纯后的产物粉末全部为ZnS,其纯度与ZnS标准试样相当。     

分子印迹技术在环境科学领域中的应用

分子印迹技术（MIT）是一门新兴的边缘科学技术,它的产生与发展为环境科学打开了又一视角。介绍了MIT的产生与发展及基本原理,综述了MIT在环境科学领域中的应用,主要包括MIT在固相萃取、膜分离、色谱分析、传感器及分子印迹聚合物作为催化剂在环境修复中的应用。     

无过氧化氢添加Fenton氧化法降解有机物的可行性研究

Fenton反应可以氧化分解有机物,在反应中的关键氧化剂羟基自由基(HO·)是通过亚铁离子与过氧化氢作用生成的,因此,传统的Fenton氧化必须由外部添加过氧化氢.研究了一种新的方法,即采用Nafion膜固定化亚铁离子,并通过光催化反应提供Fenton氧化所需的过氧化氢,使得Fenton反应在不添加过氧化氢的条件下也能够连续进行.结果表明,以甲酸为代表有机物,该方法可以在不添加过氧化氢的条件下起到分解甲酸的作用.而且,通过对负载亚铁离子Nafion膜的再生,可以使该方法的降解能力保持在稳定的范围.     

城市生活垃圾热解产气特性的试验研究

在外热式固定床试验台上,针对城市生活垃圾中的典型组分,进行了不同条件下的热解试验研究。试验测量不同条件下产物的产气量和产气速率,分析了热解气的组分和气体热值。分析发现,物料的挥发分、加热方式以及热解终温等对产气影响大,随温度的增加产气中H2含量逐渐增多,C2H4和C2H6的含量逐渐下降,气体热值有一个最大值。