关于高校绿色教育环境下中华传统体育文化探讨

针对高校绿色教育环境下中华传统体育文化的探讨问题,给出了高校绿色教育的基本理论,包括高校绿色教育的概念,高校绿色教育的特点,包括高校绿色教育的生命性、高校绿色教育的生活性、高校绿色教育的人文性和高校绿色教育的内容与实践,探讨了高校绿色教育环境与中华传统体育文化的发展,包括高校绿色教育环境与中华传统体育文化的价值、高校绿色教育环境与中华传统体育文化的发展,最后,对高校绿色教育环境与中华传统体育文化的互动进行了说明。     

Population structure and sex-change in the coral-inhabiting snailCoralliophila violacea at Hsiao-Liuchiu,Taiwan

Surveys of the coral-inhabiting snailCoralliophila violacea (Lamarck) (=C. neritoidea Kiener) were made on shallow fringing reefs (<8 m deep) around Hsiao-Liuchiu, Taiwan, between July and October 1990. The snails were aggregated into patches on the surface of massive poritid coral colonies. Coral colonies >40 cm in diameter were more likely to bear patches of snails than smaller colonies, and also to have more snails. The coralliophilids ranged from 5 to 30 mm in aperture length. The sex ratio of the population was biased toward males (539:279), with only a few small individuals of indistinguishable sex. Snails between 6 and 10 mm were all males, while most snails with aperture lengths 20 mm were females. Judging from the distinct size ranges of males and females within patches and from the observed degeneration of the penis, the snails may have changed sex from male to female with increasing size. Sex-change may occur across a wide size range (10 to 20 mm). The correlation of smallest female size and largest male size among patches indicates that snail size at sex-change is peculiar to each individual patch. Those females in patches with a single female (but many males) were significantly smaller than females in multiple-female patches. It is likely that in the absence of females males change sex at a smaller size, whereas in the presence of large females males delay sexchange until they have reached a larger size. The plasticity of size at sex-change may be adaptive and a result of natural selection at the individual level.     

奎屯市区城市废水排污系统网络化的探讨

根据奎屯市区城市废水的排放量大、排污口多、污染物浓度高以及排污下水管道污水处理设施的建成现状等特点，提出了以污水处理厂为治理中心，市区排污管道网络化的改造设想、存在问题及对策。     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

Degradation of Pesticides on Plant Surfaces and its Prediction - A Case Study on Tea Plant

The degradative kinetics of pesticides on plant surface are characterized by an initial rapid degradation which follows a first-order kinetics, then transferred to a more slower degradative rate. The degradative process mainly consists of photodegradation, evaporation, rainfall elution and growth dilution. The influencing parameters of these processes were investigated by using the tea plant as a case study. The predictive model of the initial concentration, photodegradation rate constant, evaporation rate constant, rainfall elution rate, growth dilution rate and the total degradation rate was discussed and verified in four locations situated in the range of 25°-30°N latitude, and acceptable results were obtained.     

Modeling photocatalytic destruction of the organic contaminants in continuous stir flow reactor

Thin-film technique is becoming an industry standard for the preparation of TiO₂-based photocatalyst for organic destruction. The catalyst provides several advantages over the conventional powder TiO₂ in the treatment of wastewater and groundwater. In this study, a continuous stir flow reactor model is developed capable of describing the photocatalytic process. The model incorporates the following fundamental mechanisms: adsorption, diffusion, liquid-film transfer, UV attenuation, and photocatalytic reaction. All of the simulation results indicate that there exists a highly nonlinear relation between each of these parameters and the destruction rate. Various incident light intensities also are incorporated to simulate the energy efficiency. The simulations illustrate that the photocatalytic model can be used to elucidate the effect of process variables. It is also possible to “custom-design” a catalyst for the treatment of a particular waste stream.     

Occurrence of dissolved PAHs in the Jinsha River (Panzhihua)--upper reaches of the Yangtze River,Southwest China

16 priority polycyclic aromatic hydrocarbons (PAHs) were determined in water samples from the Jinsha River (Panzhihua part), Southwest China. Total dissolved PAH concentrations varied from 21.89 microg l(-1) to 382.8 microg l(-1). It was found that the concentration of PAHs decreased along the flow direction due to the higher density distribution of coal chemical industry in the upstream of our study rivers. The pollution levels in our study area are significantly higher than previously reported values in other waters both in China and other countries. The predominance of benzo[k]fluoranthene and indeno[1,2,3-cd]pyrene was clearly observed in all water samples. On average these two compounds accounted for 98.3% of the total dissolved PAH concentration in water. The results showed the positive correlations among total dissolved PAHs, benzo[k]fluoranthene and indeno[1,2,3-cd]pyrene, which suggested that these two predominant PAHs have similar source and environmental behaviors in our study area. When compared with the survey results of organic micropollutants two decades ago, it was found that hydrocarbon pollution both predominated and even increased with the development of coal chemical industry in this area during the past 20 years. The results therefore provide important information on the current contamination status of a key industrial city in China, and points to the need for urgent action to investigate the relationship between the PAH composition and concentration in water from the Jinsha River and the wastewater discharge from coal chemical industry, and to identify the source, transport pathway and fate of PAHs in the area. It should then be necessary to adopt appropriate and instant measures to control the pollution around this area.     

Evaluation of interference to conventional and real-time PCR for detection and quantification of fungi in dust

Advances in polymerase chain reaction (PCR) have permitted accurate, rapid and quantitative identification of microorganisms in pure cultures regardless of viability or culturability. In this study, a simple sample processing method was investigated for rapid identification and quantification of fungal spores from dust samples using both conventional and real-time PCR. The proposed method was evaluated for susceptibility to interference from environmental dust samples. Stachybotrys chartarum and Aspergillus fumigatus were used as test organisms. The sensitivity of detection in pure culture was 0.1 spore DNA equivalents per PCR reaction corresponding to 20 spores ml(-1) in the sample. However, 1 spore DNA equivalent per PCR reaction corresponding to 200 spores ml(-1) in the sample was the lowest amount of spores tested without interference in dust samples spiked with spores of either fungal species. The extent of inhibition was calculated using conventional and real-time PCR reactions containing fungal spores, specific primers, specific probes (for real-time PCR) and various amounts of dust. The results indicate that the extent of inhibition by dust on PCR varies with the type and amount of dust, and number of spores. No interference in the analysis of spiked samples was detected from 0.2 mg ml(-1) of four real-life dust samples at p-value >0.05 using 2 x 10(4) spores for conventional PCR and 2 x 10(5) spores for real-time PCR. However, samples containing >0.2 mg ml(-1) real-life dust compromised the PCR assay. These results suggest the potential usefulness of a simple sample processing method in conjunction with PCR for monitoring the fungal content of aerosols collected from indoor environments.     

中国土壤中溴,碘的背景含量

通过对全国八百余个表层土样的分析测试,获得了中国土壤中溴、碘背景含量的总体水平及在各土类中的含量,相对于地壳丰度,中国土壤中溴、碘普遍得到了富集,溴、碘含量分异变化较大,并具有明显的地域分异特征,影响中国土壤中溴、碘含量的主要因素是降水量、土壤吸附体的含量以及某些特殊母质。     

Adsorption of zinc on manganite(γ-MnOOH): particle concentration effect and adsorption reversibility

The adsorption and desorption processes of Zn(Ⅱ) on τ-MnOOH as a function of particle concentrations (Cp) were studied. An obvious Cp effect was observed in this adsorption system. The degree of adsorption hysteresis increased greatly with the increasing of Cp, indicating that the extent of the real metastable-equilibrium states deviating from the ideal equilibrium state was enhanced with the increasing of Cp. The Cp-reversibility relationship confirmed the metastable-equilibrium adsorption (MEA) inequality (Pan, 1998a), which was the core formulation of the MEA theory. Because the MEA inequality was based on the basic hypothesis of MEA theory that adsorption densitιy ι is not a state variable, the Cp-reversibility relationship gave indirect evidence to the basic hypothesis of MEA theory.