A simple method for preparing prometaphase chromosomes from amniotic fluid cell cultures

A simple method for preparing prometaphase chromosomes from amniotic fluid cell cultures is described. The technique is based upon several key steps including: (1) reduced colcemid concentration, (2) reduced exposure to trypsin-EDTA, and (3) maintaining cells in single suspension by adjusting cell concentration appropriately. Chromosomes with banding resolution up ot 800 bands per haploid set can be routinely produced. The described methodology is particularly useful in defining and establishing the clinical significance of subtle structural aberrations.     

Scenarios for investigating the future of Canada’s oceans and marine fisheries under environmental and socioeconomic change

Regional Environmental Change - There is a critical need to develop effective strategies for the long-term sustainability of Canada’s oceans. However, this is challenged by uncertainty over...     

A study of the partitioning behavior of Irgarol-1051 and its transformation products

Partitioning behavior of the antifouling booster biocide, Irgarol-1051 (2-methythio-4-tert-butylamino-6-cyclopropylamino-s-triazine), its production by-product, M3, and its environmental transformation products, M1 and M2, were studied. Octanol-water partition coefficients, log K(OW), and organic matter-water partition coefficients, log K(OC), of these s-triazines were measured by reversed-phase HPLC and a triphasic SPME equilibrium model, respectively. The average log K(OW) (+/-SD) of the four s-triazine species were: 4.39+/-0.07 (M3); 3.38+/-0.12 (Irgarol-1051); 2.92+/-0.12 (M2) and 2.54+/-0.11 (M1), while mean log K(OC) (+/-SD) of these species were: 2.47+/-0.03 (M3); 2.16+/-0.03 (Irgarol-1051); 1.97+/-0.03 (M2) and 1.79+/-0.04 (M1). These results were compared to reported physicochemical parameters of Irgarol-1051 in the literature. Partitioning behavior of these s-triazine species in the coastal environment revealed by their K(OW) and K(OC) were also discussed.     

Characterizing driving patterns for Zhuhai for traffic emissions estimation

Zhuhai, a relatively less developed city on the western coast of the Pearl River Delta (PRD) of China, is planning to undergo major development in coming years. A Hong Kong-Zhuhai-Macao Bridge project has been approved by the Central Government of China. The project will have great impact on the driving pattern and vehicular emissions to the city. This baseline study collected speed-time data of two instrumented private cars in morning and evening periods, as well as a daytime nonpeak period of >10 consecutive days in the spring and winter of 2003. The authors used the microwave speed sensor and global positioning system installed in the instrumented cars and used car-chasing technique to perform the data collection. They used the statistical package SPSS to assess the consistency, as well as to evaluate the variability of the data. Nine parameters, namely, average speed, average running speed, average acceleration rate, average deceleration rate, mean length of a driving period, time proportions of driving modes, average number of acceleration-deceleration changes, root mean square acceleration, and positive acceleration kinetic energy are calculated to represent the driving characteristics. A driving cycle for private cars was developed. If emission tests were conducted using the Zhuhai driving cycle, the level of vehicle emissions measured is likely to be in between that of the Federal Test Procedure (FTP) cycle and the Melbourne Peak cycle.     

Radon progeny dose conversion coefficients for Chinese males and females

The airway dimensions for Caucasian males have been scaled by multiplying by factors 0.95 and 0.88 to give those for Chinese males and females, respectively. Employing the most recent data on physical and biological parameters, the radiation doses to the basal and secretory cells due to alpha particles from 218Po and 214Po, homogeneously distributed in the mucous layer, have been calculated. The emission of alpha particles has been simulated by a Monte Carlo method. For both basal and secretory cells, the dose conversion coefficients (DCCs) for physical conditions of sleep, rest, light and heavy exercise, have been obtained for Chinese males and females for unattached progeny, and for attached progeny of diameters 0.02, 0.15, 0.25, 0.30 and 0.50 micron. For basal cells, the coefficients lie in the range 0.69-6.82 mGy/(Js/m3) or 8.7-86 mGy/WLM for unattached progeny and in the range 0.045-1.98 mGy/(Js/m3) or 0.57-25 mGy/WLM for attached progeny. The corresponding ranges for Caucasian males are 1.27-8.81 mGy/(Js/m3) or 16-111 mGy/WLM-1 and 0.05-2.30 mGy/(Js/m3) or 0.64-29 mGy/WLM. For secretory cells, the coefficients lie in the range 0.095-16.82 mGy/(Js/m3) (1.2-212 mGy/WLM) for unattached progeny and in the range 0.095-6.67 mGy/(Js/m3) (1.2-84 mGy/WLM) for attached progeny. The corresponding ranges for Caucasian males are 0.34-21.51 mGy/(Js/m3) (4.3-271 mGy/WLM) and 0.1-7.78 mGy/(Js/m3) (1.3-98 mGy/WLM). The overall DCCs calculated for a typical home environment are 0.59 and 0.52 mSv/(Js/m3) (7.4 and 6.5 mSv/WLM) for Chinese males and females, respectively, which are 80 and 70% of the value, 0.73 mSv/(Js/m3) (9.2 mSv/WLM), for Caucasian males.     

Preparation of activated carbon using low temperature carbonisation and physical activation of high ash raw bagasse for acid dye adsorption

Activated carbons were prepared from bagasse through a low temperature (160 degrees C) chemical carbonisation treatment and gasification with carbon dioxide at 900 degrees C. The merit of low temperature chemical carbonisation in preparing chars for activation was assessed by comparing the physical and chemical properties of activated carbons developed by this technique to conventional methods involving the use of thermal and vacuum pyrolysis of bagasse. In addition, the adsorption properties (acid blue dye) of these bagasse activated carbons were also compared with a commercial activated carbon. The results suggest that despite the high ash content of the precursor, high surface areas (614-1433 m2 g(-1)) and microporous (median pore size from 0.45 to 1.2 nm) activated carbons can be generated through chemical carbonisation and gasification. The micropore area of the activated carbon developed from chars prepared by the low temperature chemical carbonisation provides favourable adsorption sites to acid blue dye (391 mg g(-1) of carbon). The alkalinity of the carbon surface and total surface area were shown to have complementary effects in promoting the adsorption of acid blue dye. Adsorption of the anionic coloured component of the acid dye was shown to be promoted in carbon exhibiting alkaline or positively charged surfaces. This study demonstrates that activated carbons with high acid dye adsorption capacities can be prepared from high ash bagasse based on low temperature chemical carbonisation and gasification.     

Removal of batteries from solid waste using trommel separation

This paper describes the design and testing of a trommel for separation of batteries from solid waste. A trommel is a cylindrical separation device that rotates and performs size separation. It has also been used in areas such as municipal solid waste (MSW) processing, classifying construction and demolition debris, screening mass-burn incinerator ash and compost processing. A trommel has been designed based on size separation to separate household batteries from solid waste, which can then be used as feedstock for alternative applications of solid waste combustion, particularly where the metal content of the product is also a critical parameter, such as the Co-Co process for integrated cement and power production. This trommel has been tested with batches of university office and restaurant wastes against various factors. The recovery efficiency of batteries increases with decreasing inclination angle of the trommel and decreasing rotational speed. A physical characterization of the university solid waste has been performed with a 20-kg sample of the tested waste. It was found that there is a trend of decreasing recovery of batteries with increasing paper composition, and a trend of increasing recovery of batteries with increasing organic materials composition.