Photocatalytic defluorination of perfluorooctanoic acid by surface defective BiOCl: Fast microwave solvothermal synthesis and photocatalytic mechanisms

There is an urgent need for developing cost-effective methods for the treatment of perfluorooctanoic acid(PFOA)due to its global emergence and potential risks.In this study,taking surface-defective BiOCl as an example,a strategy of surface oxygen vacancy modulation was used to promote the photocatalytic defluorination efficiency of PFOA under simulated sunlight irradiation.The defective BiOCl was fabricated by a fast microwave solvothermal method,which was found to induce more surface oxygen vacancies than conventional solvothermal and precipitation methods.As a result,the asprepared BiOCl showed significantly enhanced defluorination efficiency,which was 2.7 and33.8 times higher than that of BiOCl fabricated by conventional solvothermal and precipitation methods,respectively.Mechanistic studies indicated that the defluorination of PFOA follows a direct hole(h~+)oxidation pathway with the aid of·OH,while the oxygen vacancies not only promote charge separation but also facilitate the intimate contact between the photocatalyst surface and PFOA by coordinating with its terminal carboxylate group in a bidentate or bridging mode.This work will provide a general strategy of oxygen vacancy modulation by microwave-assisted methods for efficient photocatalytic defluorination of PFOA in the environment using sunlight as the energy source.     

Occupational Exposure to Harmful Chemical Substances While Processing Phenol-Formaldehyde Resins

Air pollutants emitted while processing phenol-formaldehyde resins have been investigated. Gas chromatography-mass-selective detection was used to separate and identify chemical compounds. It was determined that workers were exposed to formaldehyde in all workplaces. Besides, phenol, acetaldehyde, acrylaldehyde, 2-furaldehyde, xylene, ethylbenzene, toluene, tetrachlorethene, ethyl acetate, butyl acetate were found during the production of frictional materials; and 2-furaldehyde, phenol, naphthalene, 2-furan-methanol, polycyclic aromatic hydrocarbons (PAHs) during the production of abrasive materials. Quantitative analyses were performed with gas chromatogra-phy and high performance liquid chromatography. Assessment of occupational exposure indicated that chemical compounds emitted during the investigated processes might be dangerous for human health, mainly because of suspected carcinogenic compounds: formaldehyde and PAHs.     

Ozonation of activated carbon and its effects on the adsorption of VOCs exemplified by methylethylketone and benzene

Ozonation can modify the surface property of an activated carbon such as specific surface area, pore volume, and functional group. Results indicate that ozonation can increase the specific surface area of an activated carbon from 783+/-51 to 851+/-25 m2/g due in part to increasing micropores (those below 15 A). However, there is no change in macropore and mesopore upon ozonation. The amount of oxygen functional group (OFG) increases from 197+/-4 to 240+/-4 microeq/g, mostly in hydroxyl and carboxyl groups upon ozone treatment. These oxygen-containing functional groups are stable in the temperature range 30-250 degrees C, but begin to decompose when temperature increases beyond 300 and 350 degrees C. When the temperature reaches 1200 degrees C, all OFGs virtually disappear. The effect of ozone treatment on the adsorption of volatile organic carbon (VOC) was exemplified by methylethylketone (MEK) and benzene. The adsorption density of MEK and benzene by ozone treated activated carbon (AC(O3)) are greater than that by the untreated (AC), with MEK being more adsorbable than benzene. Results of factorial analysis indicate that physical characteristics, namely, micropore, BET surface area, pore diameter (PD), micropore volume (MV) play an important role on benzene and MEK adsorption.     

Leaching behavior and chemical stability of copper butyl xanthate complex under acidic conditions

Although xanthate addition can be used for treating copper-containing wastewater, a better understanding of the leaching toxicity and the stability characteristics of the copper xanthate complexes formed is essential. This work was undertaken to evaluate the leaching behavior of copper xanthate complex precipitates by means of toxicity characteristics leaching procedure (TCLP) and semi-dynamic leaching test (SDLT) using 1 N acetic acid solution as the leachant. Also, the chemical stability of the copper xanthate complex during extraction has been examined with the studying of variation of chemical structure using UV-vis, Fourier transform infrared and X-ray photoelectron spectroscopies (XPS).Both TCLP and SDLT results showed that a negligible amount of copper ion was leached out from the copper xanthate complex precipitate, indicating that the complex exhibited a high degree of copper leaching stability under acidic conditions. Nevertheless, chemical structure of the copper xanthate complex precipitate varied during the leaching tests. XPS data suggested that the copper xanthate complex initially contained both cupric and cuprous xanthate, but the unstable cupric xanthate change to the cuprous form after acid extraction, indicating the cuprous xanthate to be the final stabilizing structure. Despite that, the changes of chemical structure did not induce the rapid leaching of copper from the copper xanthate complex.     

Characteristics and clinical outcomes of head-injured cyclists with and without helmets in urban and rural areas of Taiwan: A 15-year study

Objective: Bicycle riding is increasingly popular in Taiwan, but the number of cyclists injured and cyclists' death rates are both increasing. The aim of this study was to investigate the different characteristics and clinical outcomes of traffic accident–related head injuries among cyclists in urban and rural areas.

Methods: Records of 812 patients (533 urban and 279 rural) admitted to 27 hospitals in Taipei City and Hualien County as the result of a traumatic head injury while bicycling between 1998 and 2013 were retrieved for study. Demographics, details about the accident, protective helmet use, and clinical outcomes were then subjected to analysis.

Results: Urban victims were more likely to be injured during morning and early evening rush hours and rural victims during the day; most urban victims were between 19 and 34 years of age and injured in the slow lane; rural victims tended to be younger or older and were injured in the fast lane (all P ≤.001). Riders who wore a helmet were less likely to suffer loss of consciousness (odds ratio [OR] = 0.31), amnesia (OR = 0.069), neurological disorders (OR = 0.205), or facial fractures (OR = 0.369). Older age, more severe head injuries, and bicycle–motor vehicle collisions influenced the severity of symptoms on admission and the residual effects at discharge.

Conclusions: Differences in the characteristics of injuries in urban and rural areas and the utilization of protective helmets may help government authorities adopt appropriate policies to promote safer and more enjoyable cycling.     

Reproductive biology of the spiny lobster, <Emphasis Type="Italic">Panulirus Penicillatus</Emphasis>, in the southeastern coastal waters off Taiwan

The reproductive biology of spiny lobster, Panulirus penicillatus, was studied based on 2,068 lobsters, ranging from 34.28 to 131.60 mm carapace length (CL), sampled in Taitung coastal waters from September 2003 to December 2004. The overall sex ratio approximated 1:1 (χ² = 0.02, P > 0.05), but the monthly sex ratios in 2004 showed significant differences and males were predominant in sizes larger than 80 mm CL. Reproductive activity, assessed using histology, a gonadosomatic index and percentage of ovigerous females, indicated that the mature females could be found in every month and that the major spawning occurred from May to September. The presence of re-developing/re-ripe ovaries by month and size-specific spawning time suggest that larger mature females (>60 mm CL) spawn at least three times a year while smaller new mature females spawn at least once a year. For females, the estimated sizes at 50% physiological and functional maturity were (mean ± SE) 56.46 ± 0.56 mm CL and 66.63 ± 1.07 mm CL. The estimated sizes at functional maturity were between 72 and 74 mm CL for males. The number of eggs per spawning event (brood size, BS) was related to CL by the equation Y _BS = 2.4 × 10^-3CL^4.18 (r ² = 0.902, n = 12). Female lobsters with CL ranging from 60 to 80 mm made the greatest contributions to egg production because of their high brood size and active reproductive activity. A minimum legal size should be established for the fishery to protect egg production potential of lobster population in the southeastern coastal waters off Taiwan.     

Volatile organic profiles and photochemical potentials from motorcycle engine exhaust

This study surveyed emissions from 2- and 4-stroke new and in-use motorcycles. Emission tests were carried out on a dynamometer following the designated test procedure of the Economic Commission for Europe (ECE). Samples were derived during various driving stages, which included idle, acceleration, 30 km/hr cruise, 50 km/hr cruise, and deceleration. All test motorcycles (10 new and 15 in-use) complied with Taiwan Environmental Protection Administration's Phase III Motorcycle Emission Standards. The dominant volatile organic carbon (VOC) species were isopentane (53 and 295 mg/km, 2- and 4-stroke, respectively), 2-methylpentane (75 and 83 mg/km), 3-methylpentane (34 and 66 mg/km), and toluene (30 and 100 mg/km). The VOC emission factors for the 2-/4-stroke motorcycles were 311/344 (new) and 1479/433 (in-use) mg/km, respectively. In addition, the dominant carbonyl species for the new and in-use motorcycles were formaldehyde (0.4 and 0.7 mg/km, respectively), acetaldehyde (0.6 and 1.2 mg/km), and acetone (0.5 and 0.7 mg/km). The carbonyl compound emission factors for the 2- and 4-stroke motorcycles were 3.2/3.1 (new) and 5.3/4.6 (in-use) mg/km, respectively. The ozone formation potentials, based on an ECE test cycle, show that the values from the in-use motorcycles were higher than those from the new motorcycles. The dominant VOC species for the ozone formation potential were propylene (65 and 502 mg-O3/km, respectively), isopentane (98 and 501 mg-O3/km), 2-methylpentane (152 and 167 mg-O3/ km), 3-methylpentane (79 and 253 mg-O3/km), and toluene (127 and 398 mg-O3/km). Further, the dominant carbonyl species were formaldehyde (4.1 and 6.2 mg-O3/ km, new and in-use, respectively) and acetaldehyde (4.8 and 9 mg-O3/km).     

Blue-green eggshell coloration is not a sexually selected signal of female quality in an open-nesting polygynous passerine

It has been proposed that blue-green egg colours have evolved as a post-mating signal of female quality, selected by males allocating their parental effort in response to the strength of this signal. We tested two main assumptions of the sexually selected egg coloration hypothesis: (1) whether the intensity of eggshell blue-green chroma (BGC) reflects female quality; and (2) whether males make their decisions on the level of parental care that they provide according to the intensity of eggshell BGC. As a model species, we chose the facultatively polygynous great reed warbler (Acrocephalus arundinaceus). In this species, females simultaneously paired with the same male, compete for his nest attendance and could benefit from signalling their quality through egg coloration. However, we found no association between the variation in eggshell BGC and the measures of female quality (physical condition, mean egg volume and age). Moreover, great reed warbler males did not adjust their investment (as measured in terms of nest defence against a brood parasite) in relation to the eggshell BGC. We conclude that blue-green egg coloration in this open-nesting passerine is unlikely to have a signalling function. Rather, the large colour variation among clutches of individual females may depend on yearly fluctuations in environmental conditions.     

Temperature and nutrients are significant drivers of seasonal shift in phytoplankton community from a drinking water reservoir,subtropical China

Reservoirs are an important source of water supply in many densely populated areas in southeast China. Phytoplankton plays an important role in maintaining the structure and function of these reservoir ecosystems. Understanding of seasonal succession in phytoplankton communities and its driving factors is essential for effective water quality management in drinking-water reservoirs. In this study, water samples were collected monthly at the surface layers of riverine, transitional, and lacustrine zones from May 2010 to April 2011 in Tingxi Reservoir, southeast China. The phytoplankton showed distinct seasonal shifts in community structure at both taxonomic and functional levels. Cyanophyta was the dominant group in summer, especially species of Raphidiopsis in May and Aphanizomenon in June, and cyanobacterial dominance was promoted by both warmer conditions and excessive nutrients loading. Cyanophyta was gradually replaced by Cryptophyta (e.g., Chroomonas caudata) in abundance and by Bacillariophyta (Fragilaria sp. or Synedra sp. and Melosira sp.) in biomass with decreasing temperature. It appeared that seasonal shifts in phytoplankton composition were closely related to climate, nutrient status, and hydrology in this reservoir. Our partial RDA results clearly showed that water temperature and nutrients (TN and TP) were the most critical factors driving phytoplankton community shift in the abundance and biomass data, respectively. Further, with the global warming, cyanobacterial blooms may increase in distribution, duration, and intensity. In our study, the abundance and biomass of cyanobacteria had significant and positive correlations with temperature and phosphorus. Therefore, a stricter limit on nutrient input should be a priority in watershed management to protect drinking water from the effects of cyanobacterial blooms, especially in high-temperature period.