Oxidation of organophosphorus pesticides for the sensitive detection by a cholinesterase-based biosensor

A potentiometric flow injection-type biosensor developed in our laboratory was used for the determination of organophosphorus pesticides (OPs). The principle of the biosensor is that the degree of inhibition of a sensor enzyme by an OP is dependent on the concentration of the pesticide. The sensor system consisted of a reactor with acetylcholinesterase (AChE) immobilized on a controlled pore glass and a detector with a tubular H(+)-selective membrane electrode. In order to examine the possibility of enhancing the sensitivity of the sensor by converting OPs to oxidized forms (stronger inhibitors), a comparison of the degree of enzyme inhibition by OPs at 10(-6) M before and after their oxidation was made. All of the ten pesticides tested exhibited greater inhibitory power toward the sensor enzyme following oxidation. All of the oxidized pesticides at 10(-6) M inhibited the sensor enzyme to a considerable degree, demonstrating the utility of the developed method for the class-specific determination of OPs. A calibration curve for diazinon, over the concentration range of 10(-11)-10(-4) M, was obtained. The lower detection limit was 2 x 10(-10) M. Treatment of the inhibited enzyme with pyridine-2-aldoxime restored the enzyme to near full activity, allowing repeated use of the sensor.     

Microbial Degradation of PCBs in Contaminated Sediments

The extent of natural dechlorination varies widely in sediments and fails to reach its maximum potential. Recent laboratory and field studies have suggested that the potential for further dechlorination is low in the Hudson and St. Lawrence Rivers. Laboratory investigations have also indicated that polychlorinated biphenyl (PCB) dechlorination is directly coupled to the growth of dechlorinating microorganisms in that: (a) there was no growth of dechlorinating microorganisms below the threshold concentration, (b) the rate of chlorine removal per gram sediment was significantly correlated to the growth rate of the microorganisms, (c) the negative effect of lower moisture levels on dechlorination was correlated to the microorganism death rate, and (d) the extent of natural dechlorination in the St. Lawrence River appears to be related to the in-situ population size of dechlorinators. There also appear to be many dechlorinating populations, each with different requirements and competence. Therefore, the growth enhancement of these microorganisms is the key to promoting PCB dechlorination either in situ or ex situ. © 1999 John Wiley & Sons, Inc.     

The effect of positive work reflection during leisure time on affective well‐being: Results from three diary studies

Previous research showed that psychological detachment from work during leisure time is beneficial and that reflecting on negative aspects of work is detrimental for employees' well‐being. However, little is known about the role of positive reflection about work during leisure time. In the present research, we examined the effects of positive work reflection on affective well‐being. Additionally, we tested the effectiveness of an intervention to increase positive work reflection and to improve well‐being with a randomized controlled field experiment. Findings from three diary studies showed that positive work reflection was related to an increase in affective well‐being with regard to both positive and negative moods. The results further indicated that the benefits of positive work reflection were incremental to that of psychological detachment and the absence of negative work reflection. Contrary to our expectation, no evidence was found for the effectiveness of the intervention. Theoretical implications of main findings as well as supplementary findings are further discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Pretreatment of sludge with microwaves for pathogen destruction and improved anaerobic digestion performance.

A new way of generating Class A sludge using microwaves was evaluated through a series of laboratory-scale experiments. Microwaves provide rapid and uniform heating throughout the material. Other benefits of microwave treatment include instant and accurate control and selective and concentrated heating on materials, such as sludge, that have a high dielectric loss factor. Sludge was irradiated with 2450-MHz microwaves, and fecal coliforms were counted. Fecal coliforms were not detected at 65 degrees C for primary sludge and anaerobic digester sludge and at 85 degrees C for waste activated sludge when sludge was irradiated with 2450-MHz microwaves. During the bench-scale anaerobic digester operation, the highest average log reduction of fecal coliforms was achieved by the anaerobic digester fed with microwave-pretreated sludge (> or = 2.66 log removal). The anaerobic digester fed with microwave-irradiated sludge was more efficient in inactivation of fecal coliforms than the other two digesters fed with raw sludge and externally heated sludge, respectively. It took more than three hydraulic retention times for a bench-scale mesophilic anaerobic digester to meet Class A sludge requirements after feeding microwave-irradiated sludge. Class A sludge can be produced consistently with a continuously fed mesophilic anaerobic digester if sludge is pretreated with microwaves to reach 65 degrees C.     

A direct passive method for measuring water and contaminant fluxes in porous media

This paper introduces a new direct method for measuring water and contaminant fluxes in porous media. The method uses a passive flux meter (PFM), which is essentially a self-contained permeable unit properly sized to fit tightly in a screened well or boring. The meter is designed to accommodate a mixed medium of hydrophobic and/or hydrophilic permeable sorbents, which retain dissolved organic/inorganic contaminants present in the groundwater flowing passively through the meter. The contaminant mass intercepted and retained on the sorbent is used to quantify cumulative contaminant mass flux. The sorptive matrix is also impregnated with known amounts of one or more water soluble 'resident tracers'. These tracers are displaced from the sorbent at rates proportional to the groundwater flux; hence, in the current meter design, the resident tracers are used to quantify cumulative groundwater flux. Theory is presented and quantitative tools are developed to interpret the water flux from tracers possessing linear and nonlinear elution profiles. The same theory is extended to derive functional relationships useful for quantifying cumulative contaminant mass flux. To validate theory and demonstrate the passive flux meter, results of multiple box-aquifer experiments are presented and discussed. From these experiments, it is seen that accurate water flux measurements are obtained when the tracer used in calculations resides in the meter at levels representing 20 to 70 percent of the initial condition. 2,4-Dimethyl-3-pentanol (DMP) is used as a surrogate groundwater contaminant in the box aquifer experiments. Cumulative DMP fluxes are measured within 5% of known fluxes. The accuracy of these estimates generally increases with the total volume of water intercepted.     

Fetal marfan syndrome: Prenatal ultrasound diagnosis with pathological confirmation of skeletal and aortic lesions

Sonography was performed during the second trimester in two pregnancies at risk for the Marfan syndrome. In one, the limbs were significantly longer than expected (p < 0·0025) and a diagnosis of the Marfan syndrome was established. Pathological examination of the fetus after pregnancy interruption showed typical foci of cystic medial necrosis in the ascending aorta.     

Controlling various contaminants in wastewater effluent through membranes and engineered wetland

For effective wastewater reclamation and water recovery, the treatment of natural and effluent organic matters (NOM and EfOM), toxic anions, and micropollutants was considered in this work. Two different NOM (humic acid of the Suwannee River, and NOM of US and Youngsan River, Korea), and one EfOM from the Damyang wastewater treatment plant, Korea, were selected for investigating the removal efficiencies of tight nanofiltration (NF) and ultrafiltration (UF) membranes with different properties. Nitrate, bromate, and perchlorate were selected as target toxic anions due to their well known high toxicities. Tri-(2-chloroethyl)-phosphate (TCEP), oxybenzone, and caffeine, due to their different K _ow and pK _a values, were selected as target micropollutants. As expected, the NF membranes provided high removal efficiencies in terms of all the tested contaminants, and the UF membrane provided fairly high removal efficiencies for anions (except for nitrate) and the relatively hydrophobic micropollutant, oxybenzon. Through the wetlands, nitrate was successfully removed. Therefore, a fair process of combining membranes with an engineered wetland could be proposed for sustainable wastewater reclamation and optimum control of contaminats.     

SENSITIVITY CONSIDERATIONS WHEN MODELING HYDROLOGIC PROCESSES WITH DIGITAL ELEVATION MODEL1

ABSTRACT: The purpose of this paper is to investigate the sensitivity of a hydrologic models to the type of DEM used. This was done while modeling basin water quality with 1:24,000 and 1:250,000 U.S. Geological Survey DEMs as input to model hydro‐logical processes. The manner in which the model results were sensitive to the choice of raster cell size (scale) is investigated in this study. The Broadhead watershed, located in New Jersey, USA, was chosen as a study area. Curve numbers were estimated by a trial and error to match simulated and observed total discharge. Monthly runoff for the watershed was used in the calibration process. Higher runoff volumes were simulated by the model when the 1:24,000 DEM were used as input data, probably due to the finer resolution which simulated increased average slope and hence higher estimated runoff from the watershed. As the simulated slope of the watershed is flatten with the 1:250,000 DEM, the response of stream flow was delayed and simulated less runoff volume.     

Optimizing Agricultural Best Management Practices in a Lake Erie Watershed

Implementing agricultural best management practices (BMPs) is influenced by a balance of desired environmental outcomes, economic feasibility, and stakeholder familiarity, the latter taken to be related to BMP acceptability. To explore this balance, we developed a multi‐objective decision support system for allocating BMP type and placement by coupling the Soil and Water Assessment Tool with a nondominated sorted genetic algorithm that minimizes total phosphorus (TP) yields from agricultural hydrologic response units (HRUs) and costs, while using stakeholder BMP familiarity as a constraint; conventional tillage, no tillage, nutrient management, riparian buffers, and contour cropping were explored. Using constraints representing current conditions, the optimization resulted in 59.6 to 81.0% reduction in agricultural TP yield from HRUs at costs ranging between US $0.8 and US $5.3 million. The constrained optimization tended to select mostly single BMPs or at most two BMPs for a given HRU due to these BMPs having higher acceptability to stakeholders. In contrast, the unconstrained case, representing full familiarity, selected 2‐ and 3‐BMP applications. There was little difference in costs between the constrained and unconstrained cases below an 80% TP yield reduction; however, significant differences were found at larger reductions, supporting the value of stakeholder education and extension efforts. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.