Sustainable Cellular Biocomposites from Natural Fibers and Unsaturated Polyester Resin for Housing Panel Applications

Increased environmental awareness and interest in long-term sustainability of material resources has motivated considerable advancements in composite materials made from natural fibers and resins, or biocomposites. In spite of these developments the lower stiffness and strength of biocomposites has limited their applications to non-load-bearing components. This paper presents an overview of a study aimed at showing that the shortcomings of biocomposites can be overcome through hybrid material designs and efficient structural configurations to make them suitable for load bearing structural components. Hybrid blends of natural and synthetic fibers can significantly improve the characteristics of biocomposites with minimal cost and environmental impact, and hierarchical cellular designs can maximize material efficiency in structural components. Periodic and hierarchical cellular plate designs made from natural fibers and unsaturated polyester resin were evaluated experimentally and analytically. Stiffness, strength, and dimensional stability of all-biocomposite and hybrid natural–synthetic material systems were evaluated through material tests while structural performance of cellular plate designs was assessed through flexural tests on laboratory-scale samples. The experimental results were correlated with analytical models for short-fiber composites and cellular structures. The results showed that biocomposites have adequate short-term performance and that they can efficiently compete with housing panels made from conventional structural materials.     

Preliminary Studies on Converting Agricultural Waste into Biodegradable Plastics—Part IV: Polysaccharide Containing Natural Materials

Corn distillers’ dry grain, corncob powder, hardwood powder, and sugar beet pulp were separately anionized by oxidation with sodium hypochlorite in aqueous solution. Solid reaction products instantly precipitated upon admixing each of the above-oxidized materials with soy protein isolate. Infrared spectra and differential scanning calorimetry supported the hypothesis that soy protein isolate complexed with all of the above-oxidized polysaccharides. Reaction products with either oxidized corn distillers’ dry grain or oxidized sugar beet pulp provided hard, brittle pellets with tensile strengths as high as 9.5 MPa, suggesting that these materials could be viable as biodegradable plastics.     

Role of Amino Acids on <Emphasis Type="Italic">In Situ</Emphasis> Photografting of Jute Yarn with 3-(Trimethoxysilyl) Propylmethacrylate

To improve the mechanical performance of natural lignocellulosic jute yarn, grafting with [3-(trimethoxysilyl) propylmethacrylate] (TMSPM) monomer has been performed on in situ UV radiation and optimized the monomer concentration (30%) and irradiation time (30 min). Effect of various amino acids (1%) as additives in TMSPM with photografted jute yarn at optimized system has been studied. The polymer loading (PL) and tensile properties like tensile strength (TS) and elongation at break (Eb) of treated samples were enhanced by incorporation of amino acids and the highest properties (TS = 300% and Eb = 386%) achieved by the sample treated with l-Arginine (Arg) with 32.5% PL value. Weak acid like 3% acetic acid and inorganic acid like 1% sulfuric acid were also incorporated in the optimized system of TMSPM grafting and compared their effect on the tensile properties with amino acid treated samples. Water absorption and weathering resistance of treated and untreated samples were also performed and treated sample showed lesser water uptake as well as less weight loss and mechanical properties as compared to untreated samples.     

Leachability testing of metallic wastes.

The performance of two tests, a batch test and a percolation test for the characterization of waste as suggested in the EU council decision 2003/33/EC was investigated. The tests were carried out on two solid waste streams from a metal recycling industry. The concentrations of heavy metals such as Cu, Zn and Pb were more than one order of magnitude lower than the proposed limit values. Generally, batch test values were equal or higher than percolation test values. With the proposed test procedures both materials could be considered as non-dangerous wastes. The test performance was also investigated using a leachant with higher ionic strength instead of demineralized water as prescribed. The results clearly show a significant increase in the concentration of some heavy metals. Total concentrations of phenolic compounds and polychlorinated biphenyls were less than 1 p.p.m. and 2 p.p.b., respectively. The precision of the batch and the percolation tests were on average 48 and 35%, respectively.     

Static and Dynamic Behavior of Fibrous Polymeric Composite Materials at Different Environmental Conditions

The study of static and dynamic behavior of environmentally conditioned fibre reinforced polymeric (FRP) composites is necessary and crucial to examine the durability, reliability and sustainability of these noble materials. FRP composites are being used all around the globe and substituting the conventional materials, starting from mini toys to large aerospace components. Present review has introduced to accumulate and understand the disseminate literature in concentrating the significance of understanding the static and dynamic behavior of FRPs with changing environmental conditionings (hygrothermal, low and high temperature, salt solution, freeze thaw, UV light) and with the interaction of different nano-fillers. Their stability and integrity in diverse service environments may be reformed by their reactions against different nature of loadings i.e. static or dynamic and the components such as fibre, matrix and fibre/matrix interfaces in those environments. The static and dynamic states of loading may come with a possible weaker region to encounter the durability and integrity of the composites. To understand the exact failure modes that correlates the position of environmentally conditioned interfaces and dynamic state of loadings, thus confusing the estimation of its overall performance and mechanical behavior. Interface reliability and durability is vital since in-service environments the degradation in the interfacial region leads to complete composite failure. Therefore, the study of combined effects of various in-service environmental conditions and the role of static and dynamic behavior on the interface will be a crucial part related to the multiaxial dynamic states of failures occurring in FRP’s.     

Effect of Pretreatment with UV Radiation on Physical and Mechanical Properties of Photocured Jute Yarn with 1,6-Hexanediol Diacrylate (HDDA)

Jute yarns were grafted with a single impregnating monomer 1,6-hexanediol diacrylate (HDDA) in order to improve the physicomechanical properties. Jute yarns soaked for different soaking times (3, 5, 10, and 30 minutes) in HDDA+MeOH solutions at different proportions (1–10% HDDA in MeOH [v/v] along with photoinitiator Darocur-1664 [3%]) were cured under UV lamp at different UV radiation intensities (two, four, six, and eight passes). Concentration of monomer, soaking time, and intensity of UV radiation were optimized with extent of mechanical properties such as tensile strength, elongation at break, and modulus. Enhanced tensile strength (67%), modulus (108%), and polymer loading (11%) were achieved with 5% HDDA concentration, 5-minute soaking time, fourth pass of UV radiation. To further improve the mechanical properties, the jute yarns were pretreated with UV radiation (5, 10, 15, 30, and 50 passes) and treated with optimized monomer concentration (5%). UV-pretreated samples showed the enhanced properties. The tensile strength and modulus increase up to 84% and 132%, respectively, than that of virgin jute yarn. An experiment involving water absorption capacity shows that water uptake by treated samples was much lower than that of the untreated samples. During the weathering test, treated yarns exhibited less loss of mechanical properties than untreated yarns.     

The Effect of CTBN Concentrations on the Kinetic Parameters of Decomposition of Blends of Epoxy Resins Modified with Carboxyl-Terminated Liquid Copolymer

Diglycidyl ether of bisphenol—A (DGEBA)—based epoxy resin was blended in the ratio of 3:1 (weight basis) with cycloaliphatic epoxy (CAE) resin. The prepared blend sample was further blended with different weight percentages of carboxyl-terminated butadiene acrylonitrile copolymer (CTBN) ranging between 0 and 25 wt% with an interval of 5 wt% and cured with stiochiometric amounts of 4, 4’- diamino diphenyl sulphone (DDS) cure agent. Structural changes during blending were studied by Fourier-transform infra-red (FTIR) spectroscopic analysis. The kinetic parameters, viz., order of decomposition reaction (n), activation energy (E), pre-exponential factor (Z) and rate decomposition constant (k), for the decomposition of the samples were calculated by applying Coats-Redfern equation over thermogravimetric (TG) data. The degradation of each sample followed second-order degradation kinetics, which was calculated by Coats-Redfern equation using best-fit analysis. This was further confirmed by linear regression analysis. The validity of data was checked by t-test statistical analysis. Further, the blend sample had higher initial degradation temperature and activation energy than its respective pure epoxy resin indicating that the CTBN acted as thermal stabilizer for epoxy resin which improved the thermal stability.     

Mechanisms of cross-shelf transport of crab megalopae inferred from a time series of daily abundance

From 20 July 1982 to 19 July 1984, crab megalopae were trapped daily from the Scripps Institution of Oceanography pier. Pachygrapsus crassipes, Portunus xantusii, Cancer spp., Hemigrapsus spp., and Majid crab megalopae dominated the catch. Yearly, seasonal, and daily variations in the magnitude of the catch were observed. Yearly and seasonal variations were probably due to a strong El Niño event that occurred during the study and to the timing of spawning and duration of the larval phase, respectively. Daily variation was correlated with oceanographic processes that can transport larvae to shore. Catch of some taxon during some seasons correlated with wind stress suggesting that transport was wind driven. The correlations were, however, weak and the sign of the correlation varied between years. The maximum daily tidal range was significantly correlated (cross-correlations and cross Fourier analysis) to both daily seawater temperature anomalies (surface and bottom) and daily catch of crab megalopae in all taxa enumerated. Significant correlations between tidal range and temperature anomalies suggest that temperature anomalies were primarily due to the shoreward transport of warm and cold water by the internal tides. The consistent and relatively strong relationship between tidal range and catch of megalopae (the cross-Fourier analysis suggests that from 20 to >90% of the variation in catch can be attributed to variation in the tidal range) suggest that much of the shoreward transport of megalopae was via the internal tides. Shoreward transport of larvae by internal tides may be due to internal cold bores or convergences over large tidally generated internal waves (solitons). Peak catches of megalopae, however, were often not associated with cold anomalies suggesting that transport was due to moving convergences over internal waves.     

Application of lead isotopic methods to the study of the anthropogenic lead provenance in Spanish overbank floodplain deposits

Changes in the principal sources of Pb in overbank sediment profiles have been documented for two Spanish areas by using Pb isotopes and Pb concentrations. These locations (Madrid and Tinto–Odiel basin) represent two of the most contaminated regions in Spain. The Community of Madrid is characterized by heavy industrial and urban activity, focused mainly in Madrid City. The Tinto–Odiel basin drains the Iberian Pyrite Belt, which hosts many polymetallic massive sulphides and is heavily affected by mining activities in their headwaters. It has been proven that the influence of anthropogenic activity is reflected in these overbank deposits by variations in Pb concentrations that, in general, correlate with shifts in the ²⁰⁶Pb/²⁰⁷Pb ratio. Rivas profile (downstream of Madrid) was found to be the most anthropogenically influenced site. The sediments within this profile which were recently deposited (170 ± 40 years BP) have the least radiogenic signatures. ²⁰⁶Pb/²⁰⁷Pb ratios ranged between 1.1763 and 1.1876 indicating significant contributions of anthropogenic Pb. In contrast, profiles upstream of Madrid possess an average ²⁰⁶Pb/²⁰⁷Pb ratio of 1.2272. It is difficult to clearly identify the most prominent source as the sediments appear to be characterized by an input from several sources. The floodplain profiles in the Tinto–Odiel basin exhibit uniform ²⁰⁶Pb/²⁰⁷Pb ratios ranging from 1.1627 (Odiel river) to 1.1665 (Tinto river). These ratios are similar to the ones possessed by sulphide ores in the area and differ from the ratios of other nonmineralized formations in the basin, indicating that mining activities are the primary, if not sole, source of Pb to the sediments.