Toxic effects of orimulsion on rainbow trout <Emphasis Type="Italic">oncorhynchus mykiss</Emphasis>

GOAL, SCOPE AND BACKGROUND: Orimulsion (stable emulsion of natural bitumen and water) is a new imported industrial fuel in Lithuania. No data on its toxicity to fish is freely available. The aim of this study was to investigate sensitivity of rainbow trout (Oncorhynchus mykiss) to acute and chronic toxicity of orimulsion and to estimate the Maximum Acceptable Toxicant Concentration (MATC) of orimulsion to fish. METHODS: Laboratory tests were conducted on rainbow trout in all stages of development (embryos, larvae, adults). Acute toxicity (96-hour duration) and long-term (28 or 60-day duration) tests evaluating the wide range spectrum of biological indices were performed under semi-static conditions. RESULTS AND DISCUSSION: Median lethal concentration (96-hour LC50) values and their 95% confidence intervals derived from the tests were: 0.1 (0.09-0.12) to embryos, 0.06 (0.05-0.07) to larvae and 2.22 (2.02-2.43) to adult fish, and 28-day LC50 to adult fish was found to be 0.26 (0.21-0.32) g/l of total orimulsion respectively. The acute toxicity of orimulsion to rainbow trout can be characterised by a narrow zone of toxic effect and a sharp boundary between lethal and sublethal concentrations. The lowest 'safe' or 'no-effect' concentration values of total orimulsion obtained in long-term tests were equal to 0.09 g/l to adult fish, 0.019 g/l to embryos, and 0.0017 g/l to larvae. Proposed value of 'application factor' for orimulsion was found to be equal to 0.03. Since orimulsion has the property to disperse in all water volume, its toxic effect on fish can be characterised by the combined effects of dispersion and water-soluble-fraction. CONCLUSIONS: Maximum Acceptable Toxicant Concentration (MATC) of 0.0017 g/l of total orimulsion to fish was derived from long-term tests based on the most sensitive parameter of rainbow trout larvae (relative mass increase at the end of the test). According to substance toxicity classification accepted for Lithuanian inland waters, orimulsion can be referred to substances of 'moderate' toxicity to fish. RECOMMENDATIONS AND OUTLOOK: For prediction and evaluation of toxic impact of orimulsion accident spills on fish, some recommendations should be given. Since orimulsion has the property to disperse in all water volume during short time periods, the amounts of both spilled orimulsion and polluted water should be ascertained. Once both parameters are known, the real concentration of orimulsion in the water body must be determined. Then this concentration must be compared with 'safe' concentration to fish. By use of 'application factor' 0.03, approximate MATC for other fish species can be estimated when only acute toxicity data (96-hour LC50 value) is available.     

Photodegradation and volatility of pesticides

BACKGROUND AND OBJECTIVES: Among the factors affecting the environmental fate of surface-applied pesticides several biological as well as abiotic factors, such as volatilization and photochemical transformations are of particular interest. Whereas reliable measurement methods and models for estimating direct photodegradation are already available for the compartments of water and atmosphere and individual subprocesses have already been described in detail, there is still a need for further elucidation concerning the key processes of heterogeneous photodegradation of environmental chemicals on surfaces. METHODS: In order to systematically examine the direct and indirect photodegradation of 14C-labeled pesticides on various surfaces and their volatilization behavior, a new laboratory device ('photovolatility chamber') was designed according to US EPA Guideline 161-3. Model experiments under controlled conditions were conducted investigating the impact of different surfaces, i.e. glass, soil dust and radish plants, and environmental factors, i.e. irradiation and atmospheric ozone (O3), on the photodegradation and volatilization of surface-deposited [phenyl-UL-14C]parathion-methyl (PM). RESULTS AND DISCUSSION: Depending on the experimental conditions, parathion-methyl was converted to paraoxon-methyl, 4-nitrophenol, unknown polar products and 14CO2. With respect to the direct photodegradation of PM (experiments without O3), the major products were polar compounds and 14CO2, due to the rapid photochemical mineralization of 4-nitrophenol to 14CO2. Paraoxon-methyl and 4-nitrophenol formation was mainly mediated by the combination of light, O3, and *OH radicals. In radish experiments PM photodegradation was presumably located in the cuticle compartment, which exhibited a sensitized photodegradation, as more unknown products were yielded compared to the glass and soil dust experiments. This could be explained by intensifying the inherent PM degradation in the dark with the same product spectrum. Due to photochemical product formation, which is an antagonistic process to the volatilization of parent compound, the volatilization of unaltered parathion-methyl from each surface generally decreased in the presence of light, particularly in combination with increasing O3 concentrations and *OH radical production rates. CONCLUSION: First results demonstrated that the photovolatility chamber provides a special tool for the systematic evaluation of (a) photodegradation of surface-located pesticide residues, i.e. measuring qualitative aspects of direct and indirect photodegradation together with relative photodegradation rates, and (b) volatilization of pesticides on surfaces by including and optionally varying relevant parameters such as light, atmospheric O3 concentration, surface temperature, air temperature, air flow rate. OUTLOOK: The experimental facility represents an important complement to lysimeter and field studies, in particular for experiments on the volatilization of pesticides using the wind tunnel system. With the photovolatility chamber special experiments on photodegradation, volatilization and plant uptake can be conducted to study key processes in more detail and this will lead to a better understanding of the effects of certain environmental processes on the fate of released agrochemicals contributing to an improved risk assessment.     

The Role of a Salt Marsh Plant on Trace Metal Bioavailability in Sediments. Estimation By Different Chemical Approaches * (7 pp)

Goal, Scope and Background The presence or absence of vegetation can condition sediment characteristics. The main aim of this work was to investigate the influence of the sea rush Juncus maritimus on metal (Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) availability to organisms living on or in estuarine sediments, from Douro River (NW Portugal), by comparing the characteristics and chemical behaviour of rhizosediments (collected within the plant assemblage) and those of sediment (collected around the plant). In order to evaluate whether and how sediment characteristics condition the role of plants on metal availability, sandy and muddy sediments colonised by J. maritimus were studied in parallel. Methods Metal availability was estimated by enzymatic digestion with pepsin (ED), which may provide an estimate of metal availability to organisms living at estuarine sediments. Nevertheless, since no consensus exists yet on the most suitable methodologies to estimate metal bioavailability in sediments, two more conventional approaches, BCR sequential extraction (SE) and AVS/SEM model, were also used, in parallel, and the information these approaches provided was compared with that provided by ED. Total-recoverable metal contents were determined by atomic absorption spectrophotometry after sediment digestion using a high-pressure microwave system. Results and Discussion Plants could concentrate metals around its roots and rhizomes. In addition, they were capable of oxidizing (release of oxygen by the roots) the anaerobic medium surrounding their roots in muddy sediment (reducing AVS). As sulphide oxidation renders metals (Cd, Cu, Ni, Pb and Zn) into more soluble forms, according to the AVS/SEM model, metals from muddy sites would be more available in rhizosediment than in sediment. The SE approach led to a similar conclusion. Nevertheless, the results provided by ED pointed at opposite conclusion, particularly for Cd and Zn, indicating less availability at rhizosediments than in the surrounding sediment. ED results were interpreted as a consequence of an enrichment of the rhizosediment in organic ligands exuded by the roots or liberated by dead plants. The effect of complexation of metals by organic compounds, which ED could not decompose/dissolve, seemed to overcome that caused by sediment oxidation. In general, a comparison of the information about metal availability by ED, SE, AVS/SEM, showed that it did not always match and in few cases it was even contradictory. Conclusion and Outlook Therefore, a thorough evaluation of the metal availability in sediments requires a combination of different chemical approaches, so as to take into consideration differences in ways of organism exposure (interstitial water and/or ingestion of sediment particles). - * The basis of this peer-reviewed paper is a presentation at the 9th FECS Conference on 'Chemistry and Environment', 29 August to 1 September 2004, Bordeaux, France.     

Acetochlor as a soil pollutant

Acetochlor is a widely used herbicide all over the world. Similarly to other organic pollutants, the environmental fate of the acetochlor is strongly related to its adsorption properties. Static adsorption equilibrium measurements were carried out at 25 degrees C on different types of Hungarian soils characterized by varying amounts of organic matter and pH values. Isotherms obtained under different conditions, as well as on various soils, exhibit a similar shape, thus indicating a two-step adsorption process. The plots cannot be interpreted according to the classes of isotherms suggested by Giles. The adsorption coefficients (K) were estimated from the initial slope of the curves. These values were determined not only by the type of the soil, but also by the composition of the aqueous media. The organic matter adsorption coefficients (Kom) were also calculated and they were approximately identical for soils of high organic matter. Due to the low value of the adsorption coefficients, the acetochlor is a rather mobile pollutant of the soil posing a potential danger to the aquatic environment. For soils with high organic content, the Kom values are similar to each other and, due to the significant coverage of the inorganic surfaces, the adsorption is controlled by the solute-organic substance interactions. The adsorption of weakly polar compounds, however, is remarkable even on those soils where the organic content is low. In this case, the binding is governed by the solute-inorganic surface interactions. This conclusion is nicely proved by the adsorption of the acetochlor on quartz. According to our hypothesis, the second part of the adsorption step is controlled by the solute-adsorbed solute interactions. The role of the organic matter in this region of the isotherm is probably negligible. As the organic matter content of the soils plays an important role in the acetochlor adsorption, humic substances must have a strong influence upon the transport of this compound. Experiments to obtain adsorption isotherms of further pesticides and the development of a quantitative model are in progress.     

The occurrence of disinfection by-products in the drinking water of Athens,Greece

Application of chlorination for the disinfection of drinking water results in the formation of a wide range of organic compounds, called disinfection by-products (DBPs), which occur due to the reaction of chlorine with natural organic materials. The occurrence of DBPs was studied in samples from four drinking-water treatment plants (WTPs) and from the distribution network of Athens, Greece. Twenty-four compounds, which belong to different categories of DBPs, were monitored, including trihalomethanes (THMs), haloacetic acids (HAAs), haloacetonitriles (HANs), haloketones (HAKs), chloral hydrate (CH) and chloropicrin (CP). Sampling was performed monthly for a period of two years, from three different points at each WTP and from eight points atthe distribution network. Samples were analyzed by GC-ECD methods, which included pretreatment with liquid-liquid extraction for volatile DBPs and acidic methanol esterification for HAAs. The results of the analyses have shown the presence of disinfection by-products belonging to all categories studied in all water samples collected after prechlorination. The major categories of DBPs detected were THMs and HAAs, while the other volatile DBPs occurred at lower concentrations. The concentrations of DBPs did not in any case exceed the maximum contaminant levels (MCL) set by USEPA and WHO. However, monitoring these compounds needs to be continued, because their levels could increase due to changes in the quality of water entering the water treatment plants. Reduction of the concentrations of DBPs could be achieved by optimization of the chlorination conditions, taking into account the effect of time. Moreover, research on alternative disinfection methods (e.g. ozone, chlorine dioxide, chloramines) and their by-products should be conducted to evaluate their applicability in the case of the drinking water of Greece.     

Water technology for specific water usage

BACKGROUND: Water is the basis for life and culture. In addition to the availability of water its quality has become a major issue in industrialized areas and in developing countries as well. Water usage has to be seen as part of the hydrological cycle. As a consequence water management has to be sustainable. The aim of the contribution is to give water usage oriented quality criteria and to focus on the technical means to achieve them. MAIN FEATURES: Water is used for many purposes, ranging from drinking and irrigation to a broad variety of technical processes. Most applications need specific hygienic, chemical and/or physical properties. RESULTS: To meet these demands separation and reaction principles are applied. The reuse of water and the application of water treatment with little or no waste and by-product formation is the way to go. Membrane separation and advanced oxidation including catalytic reactions are promising methods that apply natural processes in sustainable technical performance. Thus elimination of specific water constituents (e.g. salts and metals, microorganisms) and waste water cleaning (e.g. pollutants, nutrients and organic water) can be done efficiently. OUTLOOK: Learning from nature and helping nature with appropriate technology is a convincing strategy for sustainable water management.     

Formation of Nitrate and Sulfate in the Plume of Berlin (8 pp)

Background, Aims and Scope Secondary inorganic aerosol (SIA), i.e. particulate sulphate (S(VI)), ammonium and nitrate (N(V)) is formed from gaseous precursors i.e., sulfur dioxide (S(IV)), ammonia and nitrogen oxides, in polluted air on the time-scale of hours to days. Besides particulate ammonium and nitrate, the respective gaseous species ammonia and nitric acid can be formed, too. SIA contributes significantly to elevated levels of respirable particulate matter in urban areas and in strongly anthropogenically influenced air in general. Methods The near-ground aerosol chemical composition was studied at two stationary sites in the vicinity of Berlin during a field campaign in summer 1998. By means of analysis of the wind field, two episodes were identified which allow to study changes within individual air masses during transport i.e., a Lagrangian type of experiment, with one station being upwind and the other downwind of the city. By reference to a passive tracer (Na+) and estimates on dry depositional losses, the influences of dispersion and mixing on concentration changes can be eliminated from the data analysis. Results and Discussion Chemical changes in N(-III), N(V) and S(VI) species were observed. SIA i.e., N(V) and S(VI), was formed from emissions in the city within a few hours. The significance of emissions in the city was furthermore confirmed by missing SIA formation in the case of transport around the city. For the two episodes, SIA formation rates could be derived, albeit not more precise than by an order of magnitude. N(V) formation rates were between 1.4 and 20 and between 1.9 and 59 % h-1 on the two days, respectively, and S(VI) formation rates were > 17 and > 10 % h-1. The area south of the city was identified as a source of ammonia. Conclusion The probability of occurrence of situations during which the downwind site (50 km downwind of Berlin) would be hit by an urban plume is > 7.4%. Furthermore, for the general case of rural areas in Germany it is estimated that for more than half of these there is a significant probability to be hit by an urban plume (> 8%). The S(VI) formation rates are higher than explainable by homogeneous gas-phase chemistry and suggest the involvement of heterogeneous reactions of aerosol particles. Recommendation and Outlook The possible contribution of heterogeneous processes to S(VI) formation should be addressed in laboratory studies. Measurements at more than two sites could improve the potential of Lagrangian field experiments for the quantification of atmospheric chemical transformations, if a second downwind site is chosen in such a way that, at least under particular stability conditions, measurements there are representative for the source area.     

Klima?nderung und Klimaschutz

Ohne Zusammenfassung The aim of life is a life in line with nature. Zenon von Kition (335-263 v. Chr.)-Griech. Philisoph     

überblick

Ohne Zusammenfassung     

Spatial and Temporal Features of Ambient Air-Quality over Taiwan

This study analyzed a time series data of daily subPSI values to determine the temporal and spatial characteristics of ambient air-quality in Taiwan by employing the Varimax rotational method. The first and second rotational principal components nearly accounted for 54 and 19% for the variation of subPSI values over Taiwan. The factor loadings between rotational principal components and subPSI values of air pollutants identified the first and second components as combustion and photochemical sources, respectively. Time series analysis of rotational component scores associated with regions showed the relationships between rotational components and subPSI values and also revealed the optimum simulation period for combustion and photochemical sources.