Quantification of singlet oxygen and hydroxyl radicals upon UV irradiation of surface water

We measured the formation rate and the steady-state concentration of hydroxyl radicals and of singlet oxygen upon irradiation of lake water. There is controversy about the importance of singlet oxygen in the environmental photochemistry, but here we show that the steady-state concentration of ¹O₂ under irradiation can be higher by about two orders of magnitude compared to the hydroxyl radical. The higher occurrence of singlet oxygen in surface waters is mainly due to a higher rate of formation, because the transformation rate constants of ¹O₂ (collision with the solvent) and of ^·OH (reaction with dissolved compounds) are comparable.     

Removal of chelated copper from wastewaters by Fe<Superscript>2+</Superscript>-based replacement–precipitation

We studied the removal mechanism and affecting factors of Fe²⁺-based replacement–precipitation process for treating CuEDTA-containing wastewaters. Since Fe²⁺ was easily oxidized to Fe³⁺ in the presence of oxygen, the chelated copper was removed by the synergetic effect of Fe³⁺ replacement and NaOH precipitation. Our experiments showed that the copper removal efficiency was considerably dependant on pH conditions of the solution and molar ratio of Fe²⁺/Cu²⁺.     

Screening of phthalic acid esters in raw materials,premixes and feed additives

Phthalates are animal carcinogens and may cause death or tissue deformities. Samples of feedstuffs collected in 2005 and 2006 from industrial feed manufacturers in the Czech Republic were analysed for contamination with phthalic acid esters (PAEs), specifically di-2-ethylhexyl phthalate (DEHP) and di-n-butyl phthalate (DBP). Samples of feed additives, premixes and raw materials were collected (year 2005, n = 26). For soybean oil, the total volume of phthalates measured (DBP + DEHP) reached a level of 131.42 mg kg⁻¹; for rapeseed oil, fish meal and animal fats, the levels measured were 15.00, 7.96 and 58.87 mg kg⁻¹, respectively. The lowest level of DBP + DEHP was found in corn (2.03 mg kg⁻¹). Since phthalates were detected, samples of feed additives (n = 28) and raw materials (n = 28) were collected again in 2006. The highest levels of DBP + DEHP were found in raw materials containing fat. Phthalate levels in rapeseed oil samples ranged from 1.38 to 32.40 mg kg⁻¹ DBP + DEHP. For feed additives, contamination levels in vitamins and amino acids ranged from 0.06 to 3.15 and 1.76 to 4.52 mg kg⁻¹ DBP + DEHP, respectively. Here, we show that the levels of PAEs found in cereals such as wheat, barley and corn may be regarded as being alarmingly high, because cereals make up the largest proportion of compound feed of farm animals.     

Evaluation of metabisulfite and a commercial steel wool for removing chromium(VI) from wastewater

Efficiency of metabisulfite and a commercial steel wool as reducing agents in the removal of Cr(VI) from wastewaters was evaluated. Chromium(VI) was converted to Cr(III), precipitated with NaOH, and removed by filtration. A reduction of more than 1.0 × 10⁵ and 4.0 × 10⁵ fold in total Cr and the Cr(VI) concentrations, respectively, was observed by employing steel wool masses as low as 0.4420 g to 30-mL solutions of wastewater. Chromium(III) hydroxide obtained after the treatment was recycled and used as marker in cattle nutrition studies. The liquid residue obtained after the treatment was reused as precipitation agent replacing NaOH.     

Removal of malachite green from water samples by cloud point extraction using Triton X-100 as non-ionic surfactant

A surfactant mediated cloud point extraction (CPE) procedure has been developed to remove color from wastewater containing malachite green using Triton X-100 as non-ionic surfactant. The effects of the concentration of the surfactant, temperature and salt concentration on the different concentrations of dye have been studied and optimum conditions were obtained for the removal of malachite green. The concentration of malachite green in the dilute phase was measured using UV–Vis spectrophotometer. It was found that the separation of phases was complete and the recovery of malachite green was very effective in the presence of NaCl as an electrolyte. The results showed that up to 500 ppm of malachite green can quantitatively be removed (>95%) by CPE procedure in a single extraction using optimum conditions.     

Photo-polymerization of triclosan in aqueous solution induced by ultraviolet radiation

The formation of 2,8-dichlorodibenzo-p-dioxin and other harmful degradation products in the photo-degradation process of triclosan is of increasing concern. Here we worked on the identification of polymerized products at high triclosan concentration and on the mechanism of photoreaction. Five dimmers and two trimers of triclosan were detected by liquid chromatography-mass spectrum analysis. 2,8-dichlorodibenzo-p-dioxin was also identified by comparing with an authentic standard. Relatively low pH and high concentration favored the polymerization of triclosan. Three main routes of photoreaction were postulated, namely dechlorination, ring closure and polymerization.     

Ethylenediamine-modified activated carbon for aqueous lead adsorption

This study is to develop a carbon-based adsorbent containing multiple functional ligands for effective removal of lead ions from aqueous media. Activated carbon was oxidized by nitric acid, followed by chlorination with thionyl chloride and reaction with ethylenediamine. Modified activated carbon (MAC) was characterized using scanning electron microscopy in conjunction of energy dispersive spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FT-IR), and potentiometric titration. Surface characterizations confirmed that carboxyl, amine, and chlorine functional groups were effectively introduced onto the carbon surface by the treatments. The modifications lowered the pH at the point of zero charge (pH_pzc) from 9.6 to 2.55 and resulted in more negatively charged surfaces. Adsorptive experiments showed that aqueous Pb removal by MAC was faster, with a 62% higher capacity than the original activated carbon (60.2 vs. 37.2 mg g⁻¹).     

Biodegradation of phenol by native microorganisms isolated from coke processing wastewater

The present investigation was undertaken to assess the biodegradation of phenol by native bacteria strains isolated from coke oven processing wastewater. The strains were designated ESDSPB1, ESDSPB2 and ESDSPB3 and examined for colony morphology Gram stain characters and biochemical tests. Phenol degrading performance of all the strains was evaluated initially. One of the strains namely ESDSPB2 was found to be highly effective for the removal of phenol, which was used as sole carbon and energy source. From an initial concentration of 200 mg I(-1) it degraded to 79.84 +/- 1.23 mg l(-1). In turn the effect of temperature (20 to 45 degrees C), pH (5-10) and glucose concentration (0, 0.25 and 0.5%) on the rate of phenol degradation by that particular strain was investigated. Observations revealed that the rate of phenol biodegradation was significantly affected by pH, temperature of incubation and glucose concentration. The optimal conditions for phenol removal were found to be pH of 7 (84.63% removal), temperature, 30 degrees C (76.69% removal) and 0.25% supplemented glucose level (97.88% removal). The main significance of the study is the utilization of native bacterial strains from the waste water itself having potential of bioremediation.     

Toxizität und Risk Assessment fluvialer Sedimente und Schwebstoffe: Eine kurze Übersicht bisheriger und neuerer Entwicklungen

Background In recent years, sediments have become a central topic of scientific and public discussion as an important factor for determining water quality. While the quality of surface waters in Germany has significantly improved during the past years, highly contaminated sediments still create a considerable threat to the quality of several European catchment areas. Main features Here, we summarize different concepts and methods for the assessment of sediment quality and report on some novel integrative test methods for assessing sediment toxicity including contaminant re-mobilization during simulated re-suspension events. Results and discussion Currently, different approaches for assessment of sediment pollution exist. While instrumental chemical analyses are not suitable to accurately describe sediment toxicity, combinations of biological and chemical test procedures and integrated approaches, for example weight-of-evidence studies and effect-directed analysis (EDA), have the potential to identify key contaminants. Inter-disciplinary studies combining hydrodynamic and toxicological aspects coupled to real exposure of aquatic organisms to contaminants are currently being developed. Conclusions Monitoring and assessment of sediment quality are of increasing importance, not only for national legislation but also for the implementation of the European Water Framework Directive (WFD). Integrated approaches for the determination of sediment stability play a key role in the appropriate sediment-monitoring strategies.     

Stofffrachten, Immissionslage und guter ökologischer Zustand: Denkanstöße aus dem EU-LIFE+-Projekt M³ zur Evaluierung von Bewirtschaftungsmaßnahmen in der Wasserrahmenrichtlinie

The Water Framework Directive’s (WFD) choice of good ecological status as a metric of the immission situation in water bodies implicitly considers the exposure of biota to pollutants. However, the exposure concept lacks consequent links to food webs and substance cycles where sediments and suspended matter play an important role. This is traceable in monitoring as well as in evaluation schemes. This article identifies the major challenges towards a process-oriented approach.