Evaluation of the critical factors controlling stability of chromium, copper, arsenic and zinc in iron-treated soil

Various environmental factors are expected to affect the mobility of elements in chemically stabilized soils. The aim of this study was to evaluate the effects of pH, oxidizing-reducing potential (Eh), liquid-to-solid ratio (L/S), presence of organic matter (OM) and microbial activity (MA) on the mobility of chromium, copper, arsenic and zinc in zerovalent iron (Fe(0))-stabilized soil. A 2(5) full factorial design was applied to assess the leaching of the elements from the treated soil. The factor having the most impact on the mobility of Cr, Cu and Zn was pH; low pH (3) led to the release of these elements. Arsenic remobilization was controlled by L/S and MA, whilst Eh, though also significant, had less influence. In the identified worst-case scenarios, more than half of the total Zn and Cu and 14% of As can be expected to remobilize from the treated soil. The leaching procedure concerning sample agitation and type of filtration showed to substantially affect the results of As leaching, especially in OM rich soil.     

Analysis of per- and polyfluorinated alkyl substances in air samples from Northwest Europe

Air samples were collected from 4 field sites in Europe: 2 sites from the UK, Hazelrigg (semi-rural) and Manchester (urban); 1 site from Ireland: Mace Head (rural); and 1 site from Norway: Kjeller (rural). Additionally, air samples were taken from indoor locations in Troms?, Norway. Air samples were collected using high-volume air samplers employing sampling modules containing glass-fibre filters (GFFs, particle phase), and glass columns with a polyurethane foam (PUF)-XAD-2-PUF sandwich (gaseous phase). Typical outdoor air volumes required for the determination of per- and polyfluorinated alkyl substances (PFAS) ranged from 500-1800 m3. GFFs and PUF-XAD columns were analysed separately to obtain information on phase partitioning. All air samples were analysed for volatile, neutral PFAS, with selected GFF samples halved for analysis of both neutral and airborne particle-bound ionic PFAS. Volatile PFAS were extracted from air samples by cold-column immersion with ethyl acetate, and were analysed by gas chromatography-mass spectrometry in the positive chemical ionisation mode (GC-PCI-MS). Ionic PFAS were extracted from GFFs by sonication in methanol, and were analysed by liquid chromatography-time-of-flight-mass spectrometry (LC-TOF-MS) using electrospray ionisation in the negative ion mode (ESI-). Perfluorooctanoate (PFOA) was often the predominant analyte found in the particulate phase at concentrations ranging from 1-818 pg m(-3), and 8:2 fluorotelomer alcohol (FTOH) and 6:2 FTOH were the prevailing analytes found in the gas phase, at 5-243 pg m(-3) and 5-189 pg m(-3), respectively. These three PFAS were ubiquitous in air samples. Many other PFAS, both neutral and ionic, were also present, and levels of individual analytes were in the 1-125 pg m(-3) range. Levels of some PFAS exceeded those of traditional persistent organic pollutants (POPs). In this study, the presence of 12:2 FTOH and fluorotelomer olefins (FTolefins), and ionic PFAS other than perfluorooctane sulfonate (PFOS) and PFOA, are reported in air samples for the first time. Concentrations of neutral PFAS were several orders of magnitude higher in indoor air than outdoor air, making homes a likely important diffuse source of PFAS to the atmosphere. Our repeated findings of non-volatile ionic PFAS in air samples raises the possibility that they might directly undergo significant atmospheric transport on particles away from source regions, and more atmospheric measurements of ionic PFAS are strongly recommended.     

Determination of six anti-infectives in wastewater using tandem solid-phase extraction and liquid chromatography-tandem mass spectrometry

A rugged and specific method based on tandem solid-phase extraction and liquid chromatography-tandem mass spectrometry for the determination of anti-infectives in raw sewage and wastewater plant effluents was developed. Analyte recoveries from spiked effluents ranged from 68 to 104%. Two specific selected reaction monitoring transitions and their peak area ratios were used to avoid false positives and confirm the presence of the targeted substances. Detection limits allowed low nanogram per litre detection (0.3-22 ng L(-1)). The method was successfully applied to real samples from the Montréal wastewater treatment plant. All the studied anti-infectives were found in the wastewater samples in concentrations ranging from 39 to 276 ng L(-1). Mean flows of anti-infectives were estimated from effluent concentrations and it was found that large amounts (>118 g day(-1) up to 830 g day(-1)) are discharged in the receiving waters of the St Lawrence River.     

Phthalate levels in Norwegian indoor air related to particle size fraction

Phthalates are found in numerous consumer products, including interior materials like polyvinyl chloride (PVC). Several studies have identified phthalates in indoor air. A recent case-control study demonstrated associations between allergic symptoms in children and the concentration of phthalates in dust collected from their homes. Here we have analyzed the content of selected phthalates in particulate matter (PM): PM(10) and PM(2.5) filter samples collected in 14 different indoor environments. The results showed the presence of the phthalates di-n-butyl phthalate (DBP), butyl benzyl phthalate (BBP), dicyclohexyl phthalate (DCHP) and diethyl hexyl phthalate (DEHP) in the samples. The dominating phthalate in both PM(10) and PM(2.5) samples from all locations was DBP. More than a 10-fold variation in the mean concentration of total phthalates between sampling sites was observed. The highest levels of total phthalates were detected in one children's room, one kindergarten, in two primary schools, and in a computer room. The relative contribution of total phthalates in PM(10) and PM(2.5) was 1.1 +/- 0.3% for both size fractions. The contribution of total phthalates in PM(2.5) to total phthalates in PM(10) ranged from 23-81%, suggesting different sources. Of the phthalates that were analyzed in the PM material, DBP was found to be the major phthalate in rubber from car tyres. However, our analyses indicate that tyre wear was of minor importance for indoor levels of both DBP as well as total phthalates. Overall, these results support the notion that inhalation of indoor PM contributes to the total phthalate exposure.     

Improving soil investigations at brownfield sites using a flexible work strategy and screening methods inspired by the US Environmental Protection Agency's triad approach

Investigations of polluted brownfield sites and sample analyses are expensive, and the resulting data are often of poor quality. Efforts are needed, therefore, to improve the methods used in investigations of brownfield sites to both reduce costs and improve the quality of the results. One approach that could be useful for both of these purposes is the triad strategy, developed by the US Environmental Protection Agency, in which managing uncertainty is a central feature. In the investigations reported here, a field study was conducted to identify possible ways in which uncertainties could be managed in practice. One example considered involves optimizing the uncertainty by adjusting the sizes of samples and the efforts expended in analytical work according to the specific aims of the project. In addition, the potential utility of several toxicity assessment methods for screening sites was evaluated. As well as presenting the results of these assessments, in this contribution we discuss ways in which a flexible work strategy and screening methods inspired of the triad philosophy could be incorporated into the Swedish approach to remediate brownfield sites. A tiered approach taking advantage of field and screening methods is proposed to assess brownfield sites focusing on the response and acceptable uncertainty that are required for the task.     

Nitrate and nitrite injection during municipal solid waste anaerobic biodegradation

Nitrified leachate recirculation has been proposed as a promising strategy for sustainable landfill management. In four test reactors, nitrate or nitrite was added (250 mg N-NO(x)(-)L(-1)) during municipal solid waste biodegradation. Nitrogen-oxides reduction reactions were monitored. Denitrification was the main nitrogen reducing reaction observed. On one hand, during the acidogenic waste degradation phase, as high amounts of volatile fatty acids (VFA) were present, nitrogen-oxides reductions were interpreted as heterotrophic denitrifications. On the other hand, denitrification reactions occurring during the late methanogenic phase were accompanied by sulphate productions and, as VFA were not detected, it was probably an autotrophic reaction. Denitrification inhibition was observed once. Ammonium concentration increased suggesting the occurrence of a dissimilatory nitrate reduction to ammonium (DNRA). Statistical treatment of analytical data revealed that only H(2)S concentration had a significant negative effect on N(2) production in our system. NO production was observed once when nitrite was injected during the acidogenic phase resulting in a total waste degradation inhibition. These results indicate that the consequences of nitrified leachate recirculation in full-scale landfills need to be carefully examined especially during the acidogenic phase or in the presence of waste containing high quantities of sulphur.     

Biocatalytic dechlorination of lindane by nano-scale particles of Pd(0) deposited on Shewanella oneidensis

A new approach for the removal of the pesticide lindane (gamma-hexachlorocyclohexane or gamma-HCH) makes use of catalytic reduction of HCH to benzene over a metal catalyst, namely Pd(0). Since specific surface area plays an important role in reactivity of catalysts, this study investigated the use of bioPd(0), i.e. nano-scale Pd(0) particles precipitated on the biomass of Shewanella oneidensis, for the removal of lindane. It was demonstrated that bioPd(0) has catalytic activity towards dechlorination of gamma-HCH, with the addition of formate as electron donor, and that dechlorination with bioPd(0) was more efficient than with commercial powdered Pd(0). The biodegradable compound benzene was formed as reaction product and other HCH isomers could also be dechlorinated. Subsequently bioPd(0) was implemented in a membrane reactor technology for the treatment of gamma-HCH polluted water. In a fed-batch process configuration with formate as electron donor, a removal percentage of 98% of gamma-HCH saturated water (10 mg l(-1)) was achieved within 24h. The measured chloride mass balance approached the theoretical value. The results of this work showed that a complete, efficient and fast removal of lindane was achieved by biocatalysis with bioPd(0).