Pesticide residue removal in classic domestic processing of tomato and its effects on product quality

This study was undertaken to evaluate the effectiveness of several household practices (washing with water or acidic, alkaline, and oxidizing solutions, and peeling) in minimizing pesticide residue contamination of tomatoes, as well as the impact on the quality of the treated fruit. Tests were performed using two systemic fungicides (azoxystrobin and difenoconazole) and one contact fungicide (chlorothalonil). Solid-liquid extraction with low temperature partition (SLE/LTP) and liquid-liquid extraction with low temperature partition (LLE/LTP) were used to prepare the samples for pesticides determination by gas chromatography. Washing the tomatoes with water removed approximately 44% of chlorothalonil, 26% of difenoconazole, and 17% of azoxystrobin. Sodium bicarbonate (5%) and acetic acid (5%) solutions were more efficient, removing between 32 and 83% of the residues, while peeling removed from 68 to 88% of the pesticides. The washing solutions altered some fruit quality parameters, including acidity and chroma, and also caused weight loss. Acetic acid (0.15 and 5%) and hypochlorite (1%) solutions had the greatest effect on these parameters.     

Photocatalytic oxidation of volatile organic compounds using fluorescent visible light

Photocatalytic oxidation (PCO) of volatile organic compounds (VOCs) is a highly attractive alternative technology for purification and deodorization of indoor air. The main objectives of this study were to demonstrate that a common fluorescent visible light (FVL) lamp can be used to effectively remove by PCO low concentrations of VOCs from slightly contaminated air and to provide some fundamental and technical details on the process. The target VOC was n-butanol, which is a standard reference odorant. Its PCO was studied under a long residence time in a 3.7-L cylindrical reactor with commercial titanium dioxide (TiO2) as the reference photocatalyst and using mostly FVL for illumination. For comparison only, a UV (black) light lamp was used. The gas-phase products were detected and quantified online by gas chromatography (GC). The effects of reactor residence time, of inlet concentration, and of the relative light intensity on the efficiency of the process were also evaluated. At a high n-butanol concentration (0.1 vol %), butanal and propanal were identified as the intermediate products of the process; ethanal appeared when the initial concentration was < or = 850 ppm(v). This indicates that PCO leading to CO2 and H2O is relatively slow and proceeds in a stepwise manner. Although the efficiency of the process with an FVL lamp was significantly lower than when using a UV black light, complete PCO of low concentrations was achieved for 100 ppm(v). In a search for a material with photoactivation extended to higher wavelengths or increased photoactivity, several samples of transition metal- or silver ion-doped (2 atomic %) TiO2 as well as SrTi(1-x-)Fe(x)O3 (x = 0.1 and 0.15) perovskites were included in the study. None of these materials was more active than pure TiO2. The results of this study open new horizons in the area of in door air quality (IAQ) control.     

Retention of arsenic on hydrous ferric oxides generated by electrochemical peroxidation

Electrochemical peroxidation (ECP), an emerging remediation technology, with direct electric current applied to steel electrode and small addition of H2O2, was used to remove As(III) from contaminated aqueous solutions. Bench scale experiments were conducted to evaluate the sorption and distribution of arsenic between the soluble and solid state hydrous ferric oxides (HFO) formed as part of the ECP process. ECP was effective in removing arsenic from the aqueous solution, with >98% of the applied As(III) adsorbed on HFO. Removal was complete within 3 min of ECP treatment and apparently independent of the initial pH of the water (3.5-9.5). In the absence of H2O2 more As(III) was adsorbed by solid state iron at pH 9.5 than at 3.5 (2600 vs. 1750 microg l(-1)). Thus H2O2 was crucial to oxidize As(III) to As(V) which is more strongly retained by HFO. Removal of As was not significantly affected by the concentration of H2O2 or by current processing time. The optimal operating conditions were pH < 6.5, H2O2 concentration of 10 mg l(-1) and current process time not exceeding 3 min. X-ray diffraction (XRD), diffuse-reflectance infrared Fourier transform (DRIFT) spectroscopy and transmission electron microscopy (TEM) were applied to study the HFO deposits. The XRD data indicated the prevalence of poorly ordered Fe minerals in the suspended ECP solids with a dominance of 5 line ferrihydrite in the absence of H2O2. At pH 3.5 and with 100 mg H2O2 l(-1), akaganeite was formed, whereas an incipient hematitic phase, reflection at 0.39 nm, occurred at pH 6.5. DRIFT data indicate that both As(III) and As(V) were specifically adsorbed onto HFO at acid and neutral pH. TEM observations indicated the presence of spherical shape ferrihydrite and provided evidence for possible formation of subrounded hematite and acicular shape goethite.     

Renewable energy and greenhouse gas emissions from the waste sectors of European Union member states: a panel data analysis

In the last two decades, there has been a rich debate about the environmental degradation that results from exposure to solid urban waste. Growing public concern with environmental issues has led to the implementation of various strategic plans for waste management in several developed countries, especially in the European Union. In this paper, the relationships were assessed between economic growth, renewable energy extraction and greenhouse gas (GHG) emissions in the waste sector. The Environmental Kuznets Curve hypothesis was analysed for the member states of the European Union, in the presence of electricity generation, landfill and GHG emissions for the period 1995 to 2012. The results revealed that there is no inverted-U-shaped relationship between income and GHG emissions in European Union countries. The renewable fuel extracted from waste contributes to a reduction in GHG, and although the electricity produced also increases emissions somewhat, they would be far greater if the waste-based generation of renewable energy did not take place. The waste sector needs to strengthen its political, economic, institutional and social communication instruments to meet its aims for mitigating the levels of pollutants generated by European economies. To achieve the objectives of the Horizon 2020 programme, currently in force in the countries of the European Union, it will be necessary to increase the share of renewable energy in the energy mix.     

Formation of PCDD/Fs in the sintering process: role of the grid-Cr2O3 catalyst in the de novo synthesis

The sintering process is among the major sources of the very toxic polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in the environment. At the industrial scale, it has been shown that dust collected on the grid, which supports the feed, contains PCDD/Fs amounts between the values found in the bottom of the cake and the values found on dust collected during gas sampling in the wind boxes. This fact suggests that the grid, containing 25wt.% of chromium, could have a catalytic activity in PCDD/Fs formation during the sintering process. This research tries to study this potential role. The de novo synthesis of PCDD/Fs is simulated at laboratory scale by thermal treatments of samples mixed with grid filings or Cr2O3. The thermal experiments performed with E.S.P. dust (dust collected in the electrostatic precipitator of a sintering plant) or graphite mixed with grid filings do not allow to confirm a role of the grid in PCDD/Fs formation during the industrial process. On the other hand, it has been shown that Cr2O3 can be considered as a catalyst in the de novo synthesis of PCDD/Fs. This compound takes place in the two steps of the de novo synthesis: the degradation of the carbon matrix as well as the chlorination reactions.     

Canopy profiles of photosynthetic parameters under elevated CO2 and N fertilization in a poplar plantation

A poplar plantation has been exposed to an elevated CO2 concentration for 5 years using the free air CO2 enrichment (FACE) technique. Even after such a long period of exposure, leaves of Populus x euramericana have not shown clear signs of photosynthetic acclimation. Only at the end of the growing season for shade leaves was a decrease of maximum velocity of carboxylation (Vcmax) observed. Maximum electron transport rate (Jmax) was increased by FACE treatment in July. Assimilation rates at CO2 partial pressure of 400 (A400) and 600 (A600) micromol mol(-1) were not significantly different under FACE treatment. Most notably FACE significantly decreased stomatal conductance (g(s)) both on upper and lower canopy leaves. N fertilization increased N content in the leaves on mass basis (Nm) and specific leaf area (SLA) in both CO2 treatments but did not influence the photosynthetic parameters. These data show that in poplar plantations the long-term effects of elevated CO2 on photosynthesis do not differ considerably from the short-term ones even with N deposition.     

Contaminated sediments and bioassay responses of three macroinvertebrates, the midge larva Chironomus riparius, the water louse Asellus aquaticus and the mayfly nymph Ephoron virgo

Bioassays are widely used to estimate ecological risks of contaminated sediments. We compared the results of three whole sediment bioassays, using the midge larva Chironomus riparius, the water louse Asellus aquaticus, and the mayfly nymph Ephoron virgo. We used sediments from sixteen locations in the Dutch Rhine-Meuse Delta that differed in level of contamination. Previously developed protocols for each bioassay were followed, which differed in sediment pretreatment, replication, and food availability. The Chironomus bioassay was conducted in situ, whereas the other two were conducted in the laboratory. The measured endpoints, survival and growth, were related to contaminant levels in the sediment and to food quantity in water and sediment.

Only the response of A. aquaticus in the bioassay was correlated with sediment contamination. Food availability in overlying water was much more important for C. riparius and E. virgo, thereby masking potential sediment contaminant effects. We conclude that growth of A. aquaticus was depressed by sediment contamination, whereas growth of E. virgo and C. riparius was stimulated by seston food quantity. We discuss that the trophic state of the ecosystem largely affects the ecological risks of contaminated sediments.     

Vegetable and synthetic tannins induce hormesis/toxicity in sea urchin early development and in algal growth

Mimosa tannin and phenol-based synthetic tannin (syntan) were tested for toxicity to sea urchin (Paracentrotus lividus and Sphaerechinus granularis) early development and to marine algal growth (Dunaliella tertiolecta). Sea urchin embryogenesis was affected by vegetable tannin and syntan water extracts (VTWE and STWE) at levels >or=1mg/L. Developmental defects were significantly decreased at VTWE and STWE levels of 0.1 and 0.3mg/L when control cultures displayed suboptimal quality, i.e. <70% "viable" (normal or retarded) larvae. Fertilization success of sea urchin sperm was increased up to 0.3 mg/L STWE or VTWE, then was inhibited by increasing tannin levels (1-30 mg/L). Offspring abnormalities, following sperm exposure to VTWE or STWE, showed the same shift from hormesis to toxicity. Cell growth bioassays in D. tertiolecta exposed to VTWE or STWE (0.1-30 mg/L) showed non-linear concentration-related toxicity. Novel criteria are suggested in defining control quality that should reveal hormetic effects.     

Effect of coumaphos on cholinesterase activity, hematology, and biochemical blood parameters of bovines in tropical regions of Mexico

To assess the effect of coumaphos [O-(3-chloro-4-methyl-2-oxo-2H-1-benzopyran-7-yl) O,O-diethyl phosphorothioate] exposure on physiological responses during bovine production, acetylcolinesterase (AChE) and butyrylcholinesterase (BuChE) activities were measured in whole blood, erythrocytes, and plasma of healthy male steers (Bos Taurus x Bos indicus) sprayed with coumaphos at a non-lethal dose of 1 mg kg(- 1) body weight per day once every 14 (in vivo group) or 21 days (southern and central groups). Coumaphos topically administered at 1 mg/kg body weight per day to cattle under normal management practices in tropical areas produced a significant inhibition in erythrocyte (RBC) AChE and BuAChE activities when compared to baseline levels. RBC-AChE activity for the in vivo group decreased 71.3% (P < 0.05) and BuChE activity 59.1% (P < 0.05); RBC-AChE activity decreased 55.1% (P < 0.05) (southern group) and 43.4% (P < 0.05) (central group). Compared to the control specimens, steers from in vivo, southern, and central groups after 150 days of exposure had lower (P < 0.05) leukocyte count, absolute lymphocyte, erythrocyte, and platelet counts. Decreases in RBC-AChE activities correlated with decreased lymphocyte (r = 1.000, p = 0.01), erythrocyte (r = 1.000, p = 0.003), and platelet counts (r = 0.841, p = 0.036). Significantly increased BUN levels (P < 0.05) correlated with the decrease in RBC-AChE activities (r = - 0.997, p = 0.047) and with the decrease in absolute red blood cell (r = - 0.883, p = 0.020) and lymphocyte (r = - 0.825, p = 0.043) counts; increased (P < 0.05) total plasma protein levels correlated with the decrease in RBC-AChE activities (r = -0.998, p = 0.043), absolute red blood cell (r = - 0.998, p = 0.040), lymphocyte (r = - 0.893, p = 0.017), and platelet (r = -0.855, p = 0.030) counts. The physiological responses correlated with the erythrocyte acetylcholinesterase inhibition could be considered as early indicators or warning responses of bovine exposures to organophosphorus pesticides (OPs).     

Relative influence of the dissolved humic material on the solid-phase extraction efficiency of pesticides from environmental water

The effect of organic matter on the solid-phase extraction (SPE) efficiency for pesticides belonging to different chemical groups (urea-derivatives, carbamates and triazines) and having different polarities, was simultaneously studied for the first time in pure and simulated water samples. SPE was carried out in precolumns packed with C18 silica or styrene-divinylbenzene copolymer PLRP-S phases on-line coupled to high performance liquid chromatography (HPLC) analysis. Retention factors in water (k'(W)) were estimated for 25 compounds and used for the calculation of the theoretical breakthrough volume (Vb(T)) in pure water. Experimental breakthrough volumes (Vb(E)) were first determined using purified and deionized water as the matrix for selected compounds having Vb(T) < 500 mL; then, the same water with an added humic acid sodium salt (HA) at 0.4-5.6 mg/L of dissolved organic carbon (DOC) content, was used as the matrix for compounds having VbE < 500 mL in pure water. Several polar pesticides showed negative linear or logarithmic Vb(E) curves depending on HA content; their recoveries were also determined in environmental samples having low dissolved organic carbon values, between 0.5-6.4 mg/L. A similar behavior was observed for these compounds in simulated and natural water samples, where DOC concentration and the percolated volume (Vp) mainly determine the solute recoveries values. However, the variation of recoveries as a function of DOC content could be negative or null depending on the two examined conditions (Vp lower or larger than Vb(E) in pure water). Results demonstrated that breakthrough volume must always be considered to correctly interpret the participation of dissolved humic material on the SPE efficiency of organic micropollutants in water.