光催化膜反应器的设计及其在水处理中的应用

作为一种新型的水处理装置,光催化膜反应器具有反应迅速、降解效率高、降解彻底、无二次污染等特点,在节水减排、微污染水处理、中水回用等方面具有重要的应用价值。总结目前国内外各种不同类型的光催化膜反应器的设计、特点及在水处理中的应用情况,并对其今后的发展提出建议。     

养殖废水新型处理技术中试

针对畜禽养殖污染废水传统处理方法效率不高、噪声较大等缺点进行改进,采用"水解酸化池-塔式膜生物反应器-悬浮澄清池"工艺进行处理,结果表明:COD、氨氮去除率分别为97.5%和91%,出水水质可达GB 18596—2001《畜禽养殖污染物排放标准》。     

巢湖流域水资源可持续性评价方法研究

水资源可持续性评价模型(WRSEM,Water Resource Sustainability Evaluation Model)能够定量地评价流域水资源的可持续性,是流域水资源管理的一个有效工具。本文为了科学地衡量巢湖流域水资源开发、利用和管理的可持续性,构建了巢湖流域水资源可持续性评价模型和评价指标体系。巢湖流域水资源可持续性评价指标体系由4个一级指标(经济效率、社会公平、环境保护和保障能力)和20个二级指标构成。最后根据相对权重综合计算得到流域水资源可持续性指数。评价结果表明了巢湖流域水资源可持续性的程度,同时研究结果为巢湖流域水资源管理及其相关政策制定提供了科学依据。     

城市化进程中长江经济带长江干流水化学演变特征及影响因素

快速的城市化过程对城市周边水体水化学组成特征产生了诸多影响.为揭示长江经济带城市群发展对长江水化学特征的影响,于2020年10—11月沿长江干流,采集了四川宜宾至上海145个河流水样,并对比了历史水化学数据.同时,运用数理统计、离子比值法等方法探究了长江经济带平水期水化学特征.结果表明：长江河水的主要水化学类型为HCO₃·SO₄-Ca型,主要受流域内分布的碳酸盐岩等岩石风化作用控制;河水中阳离子以Ca²⁺为主,阴离子以HCO₃^-为主,Cl^-浓度沿径流方向升高,Ca²⁺和Mg²⁺浓度沿径流方向先升高后降低,SO₄^2-浓度沿径流方向逐渐上升,HCO₃^-浓度沿径流方向降低;城市化进程中,由于人类活动和工业活动加剧,除HCO₃^-外,Ca²⁺、Mg²⁺     

A novel approach for VOC source apportionment combining characteristic factor and pattern recognition technology in a Chinese industrial area

Volatile organic compound (VOC) emission control and source apportionment in small-scale industrial areas have become key topics of air pollution control in China. This study proposed a novel characteristic factor and pattern recognition (CF-PR) model for VOC source apportionment based on the similarity of characteristic factors between sources and receptors. A simulation was carried out in a typical industrial area with the CF-PR model involving simulated receptor samples. Refined and accurate source profiles were constructed through in situ sampling and analysis, covering rubber, chemicals, coating, electronics, plastics, printing, incubation and medical treatment industries. Characteristic factors of n-undecane, styrene, o-xylene and propane were identified. The source apportionment simulation results indicated that the predicted contribution rate was basically consistent with the real contribution rate. Compared to traditional receptor models, this method achieves notable advantages in terms of refinement and timeliness at similar accuracy, which is more suitable for VOC source identification and apportionment in small-scale industrial areas.     

Numerical evaluation of the effectiveness of NO2 and N2O5 generation during the NO ozonation process

Wet scrubbing combined with ozone oxidation has become a promising technology for simultaneous removal of SO₂ and NO_x in exhaust gas. In this paper, a new 20-species, 76-step detailed kinetic mechanism was proposed between O₃ and NO_x. The concentration of N₂O₅ was measured using an in-situ IR spectrometer. The numerical evaluation results kept good pace with both the public experiment results and our experiment results. Key reaction parameters for the generation of NO₂ and N₂O₅ during the NO ozonation process were investigated by a numerical simulation method. The effect of temperature on producing NO₂ was found to be negligible. To produce NO₂, the optimal residence time was 1.25 sec and the molar ratio of O₃/NO about 1. For the generation of N₂O₅, the residence time should be about 8 sec while the temperature of the exhaust gas should be strictly controlled and the molar ratio of O₃/NO about 1.75. This study provided detailed investigations on the reaction parameters of ozonation of NO_x by a numerical simulation method, and the results obtained should be helpful for the design and optimization of ozone oxidation combined with the wet flue gas desulfurization methods (WFGD) method for the removal of NO_x.     

城市再生水景观利用水华识别和预警方法探讨

城市再生水景观回用的主要问题是水体富营养化导致水华的暴发。为了抑制藻类的大规模生长,需要提前采取预防措施,以便将有可能爆发水华的藻类及时杀死或除去。目前,人们已经对景观水体中常见藻类的生长规律做了深入的研究,发现水体中藻数量(藻密度)的多少与水体的pH值和DO值的变化有密切而相对稳定的关系。通过在线实时监控pH值和DO值,找到△pH、△DO与藻类生长之间的关系,并结合pH、DO、温度、正磷酸盐和总氮等指标,实现实时识别和预测水华爆发的目的。     

基于资源环境承载力的全国造纸工业类型区划分研究

本文从造纸行业特征、资源消耗、污染物排放等方面入手,结合区域资源环境承载力,分析行业发展可能带来的环境污染问题.分析造纸行业发展与其所需主要资源间的空间布局关系,明确选定行业发展的资源、环境和生态制约条件.结合造纸行业特点,从环境约束、生态约束和资源约束入手,构建其环境管理类型区划分的指标体系;采用层次分析法、灰色定权聚类分析等方法对分区数据进行必要处理,采用二维判断矩阵法等方法进行环境管理类型区划分,对实施针对造纸行业分区域、分类别、差别化的环境管理提供了决策依据和方法基础.     

Smooth surface fabrication in mask projection based stereolithography

The surface finish is critical for applications such as optics, micro-fluid flow and mechanical assembly, in which optical lenses, fluidic channels and rotating components are all required to be smooth. However, the stair-stepping effect is well known in the layer-based additive manufacturing processes, in which a three-dimensional model is approximated by a set of two-dimensional layers. Consequently the fabricated surfaces have poor surface finishes especially those that are close to the horizontal plane. In this paper, a novel approach for achieving improved surface finish is presented for the mask-image-projection-based stereolithography (MIP-SL) process. Theoretical models and parameter characterization are presented for the developed methods. Accordingly, the process planning and calibration approaches for fabricating smooth up-facing surfaces in the MIP-SL process have been developed. Multiple test cases based on various types of curved surfaces have been performed. A comparison of the build results based on the traditional and the newly developed approaches illustrates the effectiveness of our method.     

应对大型油罐特大火灾的研究——LASTFIRE项目组简介

简要介绍了LASTFIRE项目组的成立背景、组织结构、研究领域、研究目的、研究思路、研究进展等内容,总结了该项目组近几年的研究成果,指出我国的相关企业或研究机构应积极参与这种国际研究组织,实现研究国外资源共享,共同提高大型储罐的安全技术和管理水平。