Rates of production of hydroxyl radicals and singlet oxygen from irradiated compost

The use of organic matter from compost to promote the catalytic photodegradation of micropollutants by solar light appears to be environmentally promising. However, quantitative evaluation of the photodegradation potential of the compost is needed. Our goal was to measure the formation rate of hydroxyl radicals and singlet oxygen, two strongly oxidant species, from irradiated compost organic matter. These two reactive species were photogenerated in all of our extracts regardless of the origin of the compost or the extraction procedure; however, their formation rates increased with composting time. Two herbicides and a fungicide were successfully photodegraded when irradiated with simulated or natural solar light in the presence of the compost organic matter or compost suspensions. For reasons of simplification and ease, the use of the latter is recommended in practice.     

Dutch new nature: (re)landscaping the Millingerwaard

This paper analyses how discourses of “new nature” have been implemented in the Dutch context – as a front runner of broader “rewilding” processes throughout Europe – frequently tied to imperatives of water safety. Drawing on the specific case of the Millingerwaard, we first examine how such discourses have materially, as well as socially, transformed the landscape in question. The paper then explores how these transformations have erstwhile affected those living in the area – in ways that are perceived, positively or negatively – according to varied groups of residents and users. In doing so, we critically reflect not only on “new nature” as it has been conceived within planning processes, and empirically practiced, in the Netherlands, but also how it is described and experienced by those whose lives are intimately tied to the landscape.     

Sorption of the herbicides diquat and difenzoquat from aqueous medium by polymeric resins in the presence of sodium dodecylsulfate: Kinetic and mechanistic study

The goal of this work was to propose a novel method for the solid-phase extraction of the herbicides diquat (DQT²⁺) and difenzoquat (DFQT⁺) from aqueous medium using polymeric Amberlite XAD-2 and XAD-4 resins in the presence of sodium dodecylsulfate (SDS). The addition of SDS to the medium was of fundamental importance in order to allow the formation of a negatively charged surface able to sorb the cationic solutes. Several factors that could influence the sorption process, such as SDS concentration in the medium, sorbent mass, pH, ionic strength, and initial concentration of the solutes were investigated. Kinetic studies were also performed to model the system and to identify the mechanisms that operate the sorption process of the herbicides. SDS concentration in the medium presented remarkable influence on the extraction efficiency, achieving maximum values when the ratios [SDS]/[herbicide] were approximately 90, for XAD-2, and 22 and 11 for DQT²⁺ and DFQT⁺, respectively, for XAD-4. The sorption process followed a pseudo second-order kinetic in all cases studied. It was also found that an intraparticle diffusion process controlled exclusively the sorption of the herbicides by the Amberlite XAD-2 and XAD-4 resins in the first 15 min, becoming less active with time.     

Evaluation of spatial distribution and accumulation of novel brominated flame retardants,HBCD and PBDEs in an Italian subalpine lake using zebra mussel (Dreissena polymorpha)

Because of the reduction in the use of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCD), novel brominated flame retardants (NBFRs), including 1,2-bis(2,4,6-tribromophenoxy) ethane (BTBPE), decabromodiphenyl ethane (DBDPE), hexabromobenzene (HBB), and pentabromoethylbenzene (PBEB), started to be marketed as alternatives to the banned formulations. In this study, the spatial distribution and accumulation of NBFRs, PBDEs, and HBCD in the biota have been investigated in the littoral compartment of a large and deep subalpine lake (Lake Maggiore, Northern Italy), using zebra mussel Dreissena polymorpha and roach (Rutilus rutilus) as bioindicators. To our knowledge, this is the first study reporting the contamination of NBFRs in the freshwater invertebrate D. polymorpha. Contamination of zebra mussel due to PBEB, HBB, and BTBPE was low, ranging from 0.9 to 2.9 ng/g lipid weight, from 1.1 to 2.9 ng/g l.w., and from 3.5 to 9.5 ng/g l.w., respectively. PBEB and BTBPE in roach were always below the detection limit, while the contamination of HBB ranged from < limits of detection (LOD) to 1.74 ng/g l.w., indicating a weak contamination. DBDPE was < LOD in all the considered biological samples. Finally, HBCD was detected in all organic tissues with mean concentrations up to 74.4 ng/g l.w. PBDE results, supported by principal component analysis elaboration, suggested a possible contamination due to the congeners composing the penta- and deca-BDE technical formulations, which are present in the Lake Maggiore basin. The biomagnification factor values showed that tetra- and penta-BDE biomagnified, while octa-, nona-, and deca-BDE were still bioavailable and detectable in the fish muscles, but they do not biomagnified. Considering the other BFRs, only HBCD showed a moderate biomagnification potential.     

Children and elders exposure assessment to particle-bound polycyclic aromatic hydrocarbons (PAHs) in the city of Rome,Italy

It has been amply demonstrated that exposure to fine particulate matter, containing polycyclic aromatic hydrocarbons (PAHs), may have adverse effects on human health, affecting especially the respiratory and cardiovascular systems. Among population, school-age children and elders present particular susceptibilities and unique exposures to environmental factors. The study presented in this paper belongs to the Project EXPAH, founded by the European (EU) LIFE+ instrument, and consists of the personal monitoring of five elementary school children and four elders during the spring and the summer/autumn of the year 2012 in the city of Rome, Italy. The average exposure, expressed as the sum of eight high-molecular-weight PAHs, resulted equal to 0.70 ng/m³ (SD?=?0.37) for children and 0.59 ng/m³ (SD?=?0.23) for the elderly people. The mean levels of gravimetric PM_2.5 were equal to 23 μg/m³ (SD?=?10) and 15 μg/m³ (SD?=?4) for children and elders, respectively. During spring and summer seasons, personal BaP_eq resulted well below the EU Air Quality reference value of 1 ng/m³. The personal monitoring average values were in the same order of magnitude with available indoor and outdoor environmental data in Rome during the same periods, for both PAHs and PM_2.5. The results suggest that, during non-heating seasons, the personal exposure to PAHs in the city of Rome can be mainly ascribed to the urban background, especially traffic emissions and road dust resuspension; secondhand cigarette smoke can be also considered another possible source of PAHs personal exposure.     

Food contamination control in European new Member States and associated candidate countries: Data collected within the SAFEFOODNET project

This paper reports the results obtained from the data collected within the European Commission funded project SAFEFOODNET regarding the state of the art in the control of chemical food contaminants in twelve European New Member States and one Associated Candidate Country (Turkey). Information has been gathered on institutions involved in food chemical contamination control, types of contaminants and matrices analyzed, procedures for data quality assurance, purposes of the analyses and accessibility of data in the participant countries. The resulting picture points out the general availability of adequate capabilities for the analysis of food contaminants in the laboratories in charge of control and the performance of the analysis of a large variety of chemicals (persistent organic pollutants, polycyclic aromatic hydrocarbons, pesticides, mycotoxins, heavy metals, radionuclides) in almost each country with few exceptions (dioxins in Bulgaria, Turkey, Latvia, persistent organic pollutants in Lithuania and Malta, polycyclic aromatic hydrocarbons in Malta). The application of validated analytical methods and the process of laboratory accreditation are partially fulfilled within the investigated countries, but still forthcoming for some countries, as in Romania, Turkey and Malta. Information collected on food controls is only partially available online and the language used is prevalently local and English to a lesser extent.     

Evaluating pollution-related damage and restoration success in urban forests with participatory monitoring and digital tools

Peri-urban forest monitoring requires indicators of vegetation damage. An example is the sacred fir (Abies religiosa) forests surrounding Mexico City, which have been heavily exposed to tropospheric ozone, a harmful pollutant, for over 4 decades. We developed a participatory monitoring system with which local community members and scientists generated data on ozone tree damage. Santa Rosa Xochiac rangers (13) used the digital tool KoboToolBox to record ozone damage to trees, tree height, tree ages, tree condition, tree position, and whether the tree had been planted. Thirty-five percent of the trees (n = 1765) had ozone damage. Younger trees had a lower percentage of foliage damaged by ozone than older trees (p < 0.0001), and asymptomatic trees tended to be younger (p < 0.0001). Symptomatic trees were taller than asymptomatic trees of the same age (R²_c = 0.43, R²_m = 0.27). Involving local communities facilitated forest monitoring and using digital technology improved data quality. This participatory system can be used to monitor forest condition change over time and thus aids restoration efforts driven by government or local communities’ interests, facilitating local decision-making.     

Implementation of a software platform to support an eco-design methodology within a manufacturing firm

The paper aims to explore the implementation of an eco-design methodology and the related software platform (G.EN.ESI – Green ENgineering dESIgn) within technical departments of a manufacturing firm. The G.EN.ESI eco-design methodology is based on the life cycle thinking concept and the software platform is conceived as a set of inter-operable software tools able to efficiently exchange data among them and with the traditional design systems (i.e. CAD, PDM and PLM). A multinational company, designing and producing household appliances, adopted the proposed methodology and related software platform for redesigning two cooker hood models with the aim to improve their environmental performances. Design and engineering departments evaluated the methodology and platform impact on the product development process, as well as the platform inter-operability with traditional design tools. The results indicate that methodology and software platform satisfy the requirements of the enterprise in terms of: (i) degree of expertise and training requirement on this subject, (ii) low impact in a consolidated design process and, (ii) good level of inter-operability among heterogeneous tools. However, the testing results highlight the necessity of a further platform optimisations in terms of software integration (single workbench made by integrated software tools with the same graphical user interface).     

Evaluation of the best compromise between the urban air quality monitoring resolution by diffusive sampling and resource requirements

The need to collect data representative of overall urban pollution is all-important in order to monitor the population exposure. High spatial resolution monitoring using diffusive samplers allows studying of the urban pollutant distribution, thus enabling deeper investigation of their generation and diffusion mechanisms. Nevertheless, such a monitoring campaign has a certain cost. In this study we point out how to find the best compromise between the number of necessary measurements and the affordable costs for monitoring campaigns. We also describe an innovative method for the proper design of a fixed urban monitoring network by means of preliminary high spatial resolution campaigns using diffusive samplers. Four European capital cities (Dublin, Madrid, Paris and Rome) were monitored six times, each time for seven days. Benzene, toluene, ethylbenzene, xylenes (BTEX) and NO(2) concentrations were measured at 146 sites in Dublin, 293 in Madrid, 339 in Paris and 290 in Rome. Multiscale grids have been drawn which ranged in mesh size from 500 m to 2 km. The statistical processing of data produced a twofold result: the creation of isoconcentration maps with geostatistical procedures, and an algorithm aimed at locating the minimum number of sampling sites where the fixed monitoring stations should be placed. Average urban levels estimated on the basis of these selected sites differ by less than 8% from those calculated on the whole populations of the sampled points. The aim of this work is to investigate how far the resolution of a monitoring campaign of urban pollution by diffusive sampling can be reduced, thus making the monitoring less expensive in terms of human and financial resources, while preserving the same quality of the results that could be achieved with a higher resolution. We found that there is no significant loss of information when the resolution of the monitoring grid for BTEX is lowered to a mesh size of 1.85 km, that is a sampling site each 3.4 km(2), and that the minimum number of sampling sites to be used is N = 0.29 A, where A is the urban surface to be monitored (in km(2)). As the spatial distribution of NO(2) is less sensitive to the distance from the emission source than that of BTEX, this relationship could be retained as a valid lower limit for the mesh grid size also for NO(2) monitoring.