The Use of Oxygen Release Compound for the Accelerated Bioremediation of Aerobically Degradable Contaminants: The Advent of Time-Release Electron Acceptors

Oxygen Release Compound (ORC®) is a patented formulation of intercalated magnesium peroxide that releases oxygen slowly when hydrated. ORC treatment represents a “low intensity” approach to site remediation. It provides a simple, passive, low-cost and long-term acceleration of aerobic natural attenuation and has been shown to cost-effectively reduce time to site closure. ORC is now a proven technology as evidenced by its five years of use on over 5,000 sites in 50 states and 11 countries, and the existence of a full body of independent, peer reviewed literature on its performance. The first applications of ORC were for the treatment of benzene, toulene, ethylbenzene, and xylene (BTEX) and other light petroleum hydrocarbon fractions. Use has now expanded to the treatment of heavier fractions such as heating oil and some of the Polycyclic aromatic hydrocarbons (PAHs). More recently. ORC has been used to bioremediate the highly mobile and problematic gasoline oxygenate methyl tertiary butyl ether (MTBE) and has been applied to sites impacted with nitroaromatics, chloroaromatics, and some of the lower-order chlorinated hydrocarbons that can be treated aerobically—most notably vinyl chloride. Since ORC is an insoluble powder, it can be packaged in material composed of a specially designed filter fabric. These “filter socks” are then contacted with contaminated groundwater via an array of wells or trenches. ORC can also be mixed directly with water to form a slurry for permanent injection applications in the saturated zone or dispersed in powdered form for the in-situ or ex-situ treatment of soil. A broad array of treatment points, in which ORC slurry is backfilled or injected, can be implemented with low-cost, small-bore push-point technologies to directly treat dissolved phase plumes and moderate levels of sorbed contaminants. Powder or slurry is traditionally used in the remediation of residual contamination at the bottom of contaminated soil excavations. © 1999 John Wiley & Sons, Inc.     

Enhancing phytoextraction: the effect of chemical soil manipulation on mobility, plant accumulation, and leaching of heavy metals

For heavy metal-contaminated agricultural land, low-cost, plant-based phytoextraction measures can be a key element for a new land management strategy. When agents are applied into the soil, the solubility of heavy metals and their subsequent accumulation by plants can be increased, and, therefore, phytoextraction enhanced. An overview is given of the state of the art of enhancing heavy metal solubility in soils, increasing the heavy metal accumulation of several high-biomass-yielding and metal-tolerant plants, and the effect of these measures on the risk of heavy metal leaching. Several organic as well as inorganic agents can effectively and specifically increase solubility and, therefore, accumulation of heavy metals by several plant species. Crops like willow (Salix viminalis L.), Indian mustard [Brassica juncea (L.) Czern.], corn (Zea mays L.), and sunflower (Helianthus annuus L.) show high tolerance to heavy metals and are, therefore, to a certain extent able to use the surpluses that originate from soil manipulation. More than 100-fold increases of lead concentrations in the biomass of crops were reported, when ethylenediaminetetraacetic acid (EDTA) was applied to contaminated soils. Uranium concentrations could be strongly increased when citric acid was applied. Cadmium and zinc concentrations could be enhanced by inorganic agents like elemental sulfur or ammonium sulfate. However, leaching of heavy metals due to increased mobility in soils cannot be excluded. Thus, implementation on the field scale must consider measures to minimize leaching. So, the application of more than 1 g EDTA kg(-1) becomes inefficient as lead concentration in crops is not enhanced and leaching rate increases. Moreover, for large-scale applications, agricultural measures as placement of agents, dosage splitting, the kind and amount of agents applied, and the soil properties are important factors governing plant growth, heavy metal concentrations, and leaching rates. Effective prevention of leaching, breeding of new plant material, and use of the contaminated biomass (e.g., as biofuels) will be crucial for the acceptance and the economic breakthrough of enhanced phytoextraction.     

Air pollution in California: Manufacturing vs. services

Relative to manufacturing, service activities are often considered by planners and officials to generate considerably less environmental pollution. This hypothesis is tested by means of an examination of the economic linkages of both manufacturing and service activities and of the resulting direct and indirect emissions of five air pollutants per dollar of output in the California statewide air basin and in four regional basins within the state. Overall acceptance or rejection of the hypothesis depends in part on the particular pollutant and air basin considered but, most importantly, on the judgement as to what activities are to be considered as service activities.This paper is based on research sponsored by the California Air Resources Board under Agreement A7-143-30.     

The estimation of historical CO2 trajectories is indeterminate: Comment on “A new look at atmospheric carbon dioxide”

A paper by Hofmann et al. (2009, this journal) is critiqued. It is shown that their exponential model for characterizing CO₂ trajectories for historical data is not estimated properly. An exponential model is properly estimated and is shown to fit over the entire 51 year period of available data. Further, the entire problem of estimating models for the CO₂ historical data is shown to be ill-posed because alternate model forms fit the data equally well. To illustrate this point the past 51 years of CO₂ data were analyzed using three different time-dependent models that capture the historical pattern of CO₂ increase. All three fit with R² > 0.98, are visually indistinguishable when overlaid, and match each other during the calibration period with R² > 0.999. Projecting the models forward to 2100, the exponential model comes quite close to the Intergovernmental Panel on Climate Change (IPCC) best estimate of 836 ppmv. The other two models project values far below the IPCC low estimates. The problem of characterizing historical CO₂ levels is thus indeterminate, because multiple models fit the data equally well but forecast very different future trajectories.     

Serving one another: Are shared and self‐leadership the keys to service sustainability?

Service has received increasing attention in the management literature, yet sustainability of service is often overlooked. In this Incubator we examine the potential for client involvement through shared and self‐leadership to foster empathy enhanced service and reduced costs, both of which may support a more sustainable service delivery process. Copyright © 2015 John Wiley & Sons, Ltd.     

Formation and speciation of disinfection byproducts during chlor(am)ination of aquarium seawater

The chemistry associated with the disinfection of aquarium seawater is more complicated than that of freshwater, therefore limited information is available on the formation and speciation of disinfection byproducts(DBPs) in marine aquaria. In this study, the effects of organic precursors, bromide(Br-) and pre-ozonation on the formation and speciation of several typical classes of DBPs, including trihalomethanes(THM4), haloacetic acids(HAAs),iodinated trihalomethanes(I-THMs), and haloacetamides(HAc Ams), were investigated during the chlorination/chloramination of aquarium seawater. Results indicate that with an increase in dissolved organic carbon concentration from 4.5 to 9.4 mg/L, the concentrations of THM4 and HAAs increased by 3.2–7.8 times under chlorination and by 1.1–2.3 times under chloramination. An increase in Br-concentration from 3 to 68 mg/L generally enhanced the formation of THM4, I-THMs and HAc Ams and increased the bromine substitution factors of all studied DBPs as well, whereas it impacted insignificantly on the yield of HAAs. Pre-ozonation with 1 mg/L O3 dose substantially reduced the formation of all studied DBPs in the subsequent chlorination and I-THMs in the subsequent chloramination. Because chloramination produces much lower amounts of DBPs than chlorination, it tends to be more suitable for disinfection of aquarium seawater.