Preparation and Properties of Propylene Glycol Plasticized Wheat Protein Isolate Novel Green Films

Novel bio-based green films were prepared using wheat protein isolate (WPI) by solution casting method using Propylene Glycol as a plasticizer for packaging applications. The effect of the plasticizer content (10, 15, 20 and 25 wt%) on mechanical properties (tensile strength, young’s modulus and  % of elongation) was investigated. A thermal degradation and phase transition of the prepared WPI was assessed by means of TGA and DSC analysis. The results showed that the tensile strength and young’s modulus decreased and  % of elongation increased with increasing PG content. The ATR-FTIR and SEM were used for structural characterization and morphology of the films, respectively. FTIR studies reveals that the intensity of the bands corresponding to the amide groups increases with increasing PG content tending to increase protein–PG interactions. Further, the glass transition temperature was decreased and the thermal stability of the WPI was found to be increased by plasticization. The overall thermal stability of the films was improved and is attributed to the increase in mobility of the polymer chains.     

Drying of salted silver jewfish in a hybrid solar drying system and under open sun: Modeling and performance analyses

This study investigated the thin-layer drying kinetics of salted silver jewfish in a hybrid solar drying system and under open sun. Ten drying models were compared with experimental data of salted silver jewfish drying. A new model was introduced, which is an offset linear logarithmic (offset modified Page model). The fit quality of the models was evaluated using the coefficient of determination (R²), root mean square error (RMSE), and sum of squared absolute error (SSAE). The result showed that Midilli et al. model and new model were comparable with two or three-term exponential drying models. This study also analyzed energy and exergy during solar drying of salted silver jewfish. Energy analysis throughout the solar drying process was estimated on the basis of the first law of thermodynamics, whereas exergy analysis during solar drying was determined on the basis of the second law of thermodynamics. At an average solar radiation of 540 W/m² and a mass flow rate of 0.0778 kg/sec, the collector efficiency and drying system efficiency were about 41% and 23%, respectively. Specific energy consumption was 2.92 kWh/kg. Moreover, the exergy efficiency during solar drying process ranged from 17% to 44%, with an average value of 31%. The values of improvement potential varied between 106 and 436 W, with an average of 236 W.     

Air quality in Yanbu,Saudi Arabia

Yanbu, on the Red Sea, is an affluent Saudi Arabian industrial city of modest size. Substantial effort has been spent to balance environmental quality, especially air pollution, and industrial development. We have analyzed six years of observations of criteria pollutants O₃, SO₂, particles (PM_2.5 and PM₁₀) and the known ozone precursors—volatile organic compounds (VOCs) and nitrogen oxides (NO_x). The results suggest frequent VOC-limited conditions in which ozone concentrations increase with decreasing NO_x and with increasing VOCs when NO_x is plentiful. For the remaining circumstances ozone has a complex non-linear relationship with the VOCs. The interactions between these factors at Yanbu cause measurable impacts on air pollution including the weekend effect in which ozone concentrations stay the same or even increase despite significantly lower emissions of the precursors on the weekends. Air pollution was lower during the Eids (al-Fitr and al-Adha), Ramadan and the Hajj periods. During Ramadan, there were substantial night time emissions as the cycle everyday living is almost reversed between night and day. The exceedances of air pollution standards were evaluated using criteria from the U.S. Environmental Protection Agency (EPA), World Health Organization (WHO), the Saudi Presidency of Meteorology and Environment (PME) and the Royal Commission Environmental Regulations (RCER). The latter are stricter standards set just for Yanbu and Jubail. For the fine particles (PM_2.5), an analysis of the winds showed a major impact from desert dust. This effect had to be taken into account but still left many occasions when standards were exceeded. Fewer exceedances were found for SO₂, and fewer still for ozone. The paper presents a comprehensive view of air quality at this isolated desert urban environment.

Implications: Frequent VOC-limited conditions are found at Yanbu in Saudi Arabia that increase ozone pollution if NO_x is are reduced. In this desert environment, increased nightlife produces the highest levels of VOCs and NO_x at night rather than the day. The effects increase during Ramadan. Fine particles peak twice a day—the morning peak is caused by traffic and increases with decreasing wind, potentially representing health concerns, but the larger afternoon peak is caused by the wind, and it increases with increasing wind speeds. These features suggest that exposure to pollutants must be redefined for such an environment.     

Column with CNT/magnesium oxide composite for lead(II) removal from water

Background  

In this study, manganese dioxide-coated multiwall carbon nanotube (MnO₂/CNT) nanocomposite has been successfully synthesized.     

Modeling of methane oxidation in landfill cover soil using an artificial neural network

Knowing the fraction of methane (CH₄) oxidized in landfill cover soils is an important step in estimating the total CH₄ emissions from any landfill. Predicting CH₄ oxidation in landfill cover soils is a difficult task because it is controlled by a number of biological and environmental factors. This study proposes an artificial neural network (ANN) approach using feedforward backpropagation to predict CH₄ oxidation in landfill cover soil in relation to air temperature, soil moisture content, oxygen (O₂) concentration at a depth of 10 cm in cover soil, and CH₄ concentration at the bottom of cover soil. The optimum ANN model giving the lowest mean square error (MSE) was configured from three layers, with 12 and 9 neurons at the first and the second hidden layers, respectively, log-sigmoid (logsig) transfer function at the hidden and output layers, and the Levenberg-Marquardt training algorithm. This study revealed that the ANN oxidation model can predict CH₄ oxidation with a MSE of 0.0082, a coefficient of determination (R ²) between the measured and predicted outputs of up to 0.937, and a model efficiency (E) of 0.8978. To conclude, further developments of the proposed ANN model are required to generalize and apply the model to other landfills with different cover soil properties.

Implications:

To date, no attempts have been made to predict the percent of CH₄ oxidation within landfill cover soils using an ANN. This paper presents modeling of CH₄ oxidation in landfill cover soil using ANN based on field measurements data under tropical climate conditions in Malaysia. The proposed ANN oxidation model can be used to predict the percentage of CH₄ oxidation from other landfills with similar climate conditions, cover soil texture, and other properties. The predicted value of CH₄ oxidation can be used in conjunction with the Intergovernmental Panel on Climate Change (IPCC) First Order Decay (FOD) model by landfill operators to accurately estimate total CH₄ emission and how much it contributes to global warming.     

Chemical composition and antimicrobial activities of the essential oil from the seeds of Enterolobium contortisiliquum (leguminosae)

Seeds of Enterolobium contortisiliquum were subjected to steam distillation to obtain a light yellow essential oil in a yield of 3 ml/kg of seeds. The major components of the oil were identified using gas chromatography/mass spectrometry (GC-MS) and were furfural, limonene, linalool, estragole, carvone, and apiole with carvone representing more than 50% of the total composition. Antimicrobial activities of the essential oil were determined against four species of gram positive bacteria (Bacillus subtilis, Bacillus cereus, Staphylococcus aureus, Micrococcus luteus) and two gram negative bacteria (Klebsiella pneumoniae, Serratia Marcescencs). The essential oil inhibited the growth of all tested bacteria but was most effective against the gram positive bacteria. Chemicals that are responsible for the antibacterial effect of the essential oil were determined using the bio-autography thin layer chromatography (TLC) technique. The active compounds responsible for the activity were found to be carvone and estragole.     

Prediction of higher heating value of solid fuel produced by hydrothermal carbonization of empty fruit bunch and various biomass feedstock

Journal of Material Cycles and Waste Management - There are many influencing variables when it comes to designing a thermal conversion system for biomass and other fuels. One of the most important...     

Sustainability assurance practices: a systematic review and future research agenda

Environmental Science and Pollution Research - Although firms increasingly publish sustainability reports, assuring such reports is relatively new. This study reviews the literature of...     

Intelligent modeling of dye removal by aluminized activated carbon

Environmental Science and Pollution Research - Methylene blue (MB) is an important compound in textile and wood processing industries as well as in medical research for combating malaria parasites....