A reassessment of the mating system characteristics of the army ant Eciton burchellii

In a recent study, Denny et al. (2004a) showed that queens of the army ant, Eciton burchellii, mate with multiple males and presented estimates suggesting that they mate with more males than queens of any other ant species so far investigated. They also inferred that data were consistent with queens being inseminated repeatedly throughout their life, which would be exceptional among the social Hymenoptera and contradictory to predictions from kin selection theory. In the present study, we reanalyze these data using new software and supplement them with similar microsatellite data from other colonies of the same species. Mating frequencies in E. burchellii are indeed very high (mean observed and effective queen-mating frequencies of 12.9 each) but considerably lower than the previous estimates. We show that the number of patrilines represented in the first worker offspring of a young queen is lower than in older queens but suggest that this may be due to initial sperm clumping in the queen’s sperm storage organ, rather than to repeated inseminations. Moreover, we found no evidence for repeated mating by genotyping sequential worker generations produced by a single old queen, showing that she did not obtain new inseminations despite ample opportunities for mating.     

Cladistic analysis of Bantu languages: a new tree based on combined lexical and grammatical data

The phylogeny of the Bantu languages is reconstructed by application of the cladistic methodology to the combined lexical and grammatical data (87 languages, 144 characters). A maximum parsimony tree and Bayesian analysis supported some previously recognized clades, e.g., that of eastern and southern Bantu languages. Moreover, the results revealed that Bantu languages south and east of the equatorial forest are probably monophyletic. It suggests an unorthodox scenario of Bantu expansion including (after initial radiation in their homelands and neighboring territories) just a single passage through rainforest areas followed by a subsequent divergence into major clades. The likely localization of this divergence is in the area west of the Great Lakes. It conforms to the view that demographic expansion and dispersal throughout the dry-forests and savanna regions of subequatorial Africa was associated with the acquisition of new technologies (iron metallurgy and grain cultivation).Electronic supplementary material  Supplementary material is available for this article at     

美国洛杉矶空气管理经验分析

过去35年间,洛杉矶的经济和人口持续增长、城市扩张,但是洛杉矶的空气污染水平得到了下降,在达到加利福利亚州和《清洁空气法》所规定的大气质量总体目标方面,有了长足的进步.期间起到重大作用的因素包括:①固定污染源和移动污染源气体污染物排放的控制技术和企业实践的巨大进步.②联邦、州和地区的清洁空气政策的发展.③强有力的专门负责清洁空气政策的监督和执行行政机构的设立.④公众压力.⑤从信任政府运用命令与控制手段到利用激励手段和市场手段完成许多政策目标(包括空气污染控制)的变革.同时,该地区的人口还在持续增长,经济继续繁荣扩张,意味着将产生更多的空气污染物,尤其是来自移动污染源的污染物.另外,在公众不太支持加强政府力量或增加税收的形势下,要求政策制定者解决空气污染的问题或大幅度改变洛杉矶居民的生活方式.     

Variation partitioning of species data matrices: estimation and comparison of fractions

Establishing relationships between species distributions and environmental characteristics is a major goal in the search for forces driving species distributions. Canonical ordinations such as redundancy analysis and canonical correspondence analysis are invaluable tools for modeling communities through environmental predictors. They provide the means for conducting direct explanatory analysis in which the association among species can be studied according to their common and unique relationships with the environmental variables and other sets of predictors of interest, such as spatial variables. Variation partitioning can then be used to test and determine the likelihood of these sets of predictors in explaining patterns in community structure. Although variation partitioning in canonical analysis is routinely used in ecological analysis, no effort has been reported in the literature to consider appropriate estimators so that comparisons between fractions or, eventually, between different canonical models are meaningful. In this paper, we show that variation partitioning as currently applied in canonical analysis is biased. We present appropriate unbiased estimators. In addition, we outline a statistical test to compare fractions in canonical analysis. The question addressed by the test is whether two fractions of variation are significantly different from each other. Such assessment provides an important step toward attaining an understanding of the factors patterning community structure. The test is shown to have correct Type I. error rates and good power for both redundancy analysis and canonical correspondence analysis.     

Spatiotemporal variation in survival rates: implications for population dynamics of yellow-bellied marmots

Spatiotemporal variation in age-specific survival rates can profoundly influence population dynamics, but few studies of vertebrates have thoroughly investigated both spatial and temporal variability in age-specific survival rates. We used 28 years (1976-2003) of capture-mark-recapture (CMR) data from 17 locations to parameterize an age-structured Cormack-Jolly-Seber model, and investigated spatial and temporal variation in age-specific annual survival rates of yellow-bellied marmots (Marmota flaviventris). Survival rates varied both spatially and temporally, with survival of younger animals exhibiting the highest degree of variation. Juvenile survival rates varied from 0.52 +/- 0.05 to 0.78 +/- 0.10 among sites and from 0.15 +/- 0.14 to 0.89 +/- 0.06 over time. Adult survival rates varied from 0.62 +/- 0.09 to 0.80 +/- 0.03 among sites, but did not vary significantly over time. We used reverse-time CMR models to estimate the realized population growth rate (lamda), and to investigate the influence of the observed variation in age-specific survival rates on lamda. The realized growth rate of the population closely covaried with, and was significantly influenced by, spatiotemporal variation in juvenile survival rate. High variability in juvenile survival rates over space and time clearly influenced the dynamics of our study population and is also likely to be an important determinant of the spatiotemporal variation in the population dynamics of other mammals with similar life history characteristics.     

Effluent profile of commercially used low-phosphorus fish feeds

Excess phosphorus (P) in aquaculture feeds contributes to the eutrophication of natural waters. While commercially available low-P (LP) fish feeds have been developed, there is uncertainty about their potential to reduce effluent P while maintaining fish growth relative to regular P (RP) feeds. We therefore simulated commercial aquaculture conditions and fed for 55 days rainbow trout (approximately 190 kg/raceway, n = 3 raceways/diet) RP (1.4% total P) and LP (1.0%) feeds then determined effluent P levels, fish growth, and feed costs. Excretions of fecal-P and soluble-P, but not particulate-P, in effluents were greater in RP than in LP ponds. Fish growth, bone-P and plasma-P were similar between diets, demonstrating that LP feeds can lower effluent P levels without compromising growth. Costs were 0.97 dollars/kg fish production for LP feeds, and 0.74 dollars/kg for RP. Because feed is the largest variable cost in commercial aquaculture, the use of LP feeds can significantly increase production costs.     

Brachidontes variabilis and Patella sp. as quantitative biological indicators for cadmium, lead and mercury in the Lebanese coastal waters

The mussel, Brachidontes variabilis, and the limpet, Patella sp., were used as indicators to monitor cadmium, lead and mercury concentrations along the Lebanese coast. Studies were carried out in order to define the best strategy for assessing and minimizing the effects of size and physiological condition on the metal contents of the molluscs, and corrective models were constructed. Metal concentrations in surface water were measured to estimate bioconcentration factors (BCFs). The BCFs varied from 8.3 x 10(3) to 3.4 x 10(4), from 7.5 x 10(3) to 8.0 x 10(3) and from 3.0 x 10(4) to 3.2 x10(4), for Cd, Pb and Hg, respectively. For limpets, BCFs varied from 1.7 x 10(4) to 7.4 x 10(4) for Cd, from 2.5 x 10(3) to 6 x 10(3) for Pb and remained fairly constant at around 10(4) for Hg. The highest BCFs were associated with lowest contamination levels. The results of the geographical survey exhibited a similar large-scale spatial pattern for the two species and followed the metal concentration distributions measured in the waters.     

Radionuclides, heavy metals and fluorine incidence at Tapira phosphate rocks, Brazil, and their industrial (by) products

Inorganic phosphate fertilizers may contain radionuclides, heavy metals and fluorine. This paper presents the possible environmental hazards from Tapira phosphate rocks and their (by) products (Brazil) utilized as phosphate fertilizers. The activity concentration of 238U, 234U, 226Ra and 40K in Tapira phosphate rocks is within the world range for these rock types. The 232Th activity concentration is higher than the mean reported in phosphate rocks. A value of 2184 nGy h(-1) was obtained for the exposure dose rate in Tapira phosphate deposit area, which is indicative of a high background radiation area. The flotation-separation process causes the incorporation of no more than 9%, 11% and 24% of radionuclides, heavy metals and fluorine, respectively, into the phosphate concentrate. The radionuclides and heavy metals existing in phosphate fertilizers applied in Brazilian crops according to the recommended rates, do not raise their concentration in soils to harmful levels.     

Column experiments to assess the effects of electron donors on the efficiency of in situ precipitation of Zn,Cd, Co and Ni in contaminated groundwater applying the biological sulfate removal technology

BACKGROUND, AIMS AND SCOPE: In a previous study, we explored the use of acetate, lactate, molasses, Hydrogen Release Compound (HRC, which is based on a biodegradable poly-lactate ester), methanol and ethanol as carbon source and electron donor to promote bacterial sulfate reduction in batch experiments, this with regards to applying an in situ metal precipitation (ISMP) process as a remediation tool to treat heavy metal contaminated groundwater at the site of a nonferrous metal work company. Based on the results of these batch tests, column experiments were conducted with lactate, molasses and HRCI as the next step in our preliminary study for a go-no go decision for dimensioning an on site application of the ISMP process that applies the activity of the endogenous population of sulfate-reducing bacteria (SRB). Special attention was given to the sustainability of the metal precipitation process under circumstances of changing chemical oxygen demand (COD) to [SO4(2-)] ratios or disrupted substrate supply. METHODS: To optimize the ISMP process, an insight is needed in the composition and activity of the indigenous SRB community, as well as information on the way its composition and activity are affected by process conditions such as the added type of C-source/ electron donor, or the presence of other prokaryotes (e.g. fermenting bacteria, methane producing Archaea, acetogens). Therefore, the biological sulfate reduction process in the column experiments was evaluated by combining classical analytical methods [measuring heavy metal concentration, SO4(2-)-concentration, pH, dissolved organic carbon (DOC)] with molecular methods [denaturing gradient gel electrophoresis (DGGE) fingerprinting and phylogenetic sequence analysis] based on either the 16S rRNA-gene or the dsr (dissimilatory sulfite reductase) gene, the latter being a specific biomarker for SRB. RESULTS AND DISCUSSION: All carbon sources tested promoted SRB activity, which resulted within 8 weeks in a drastic reduction of the sulfate and heavy metal contents in the column effluents. However, unexpected temporal decreases in the efficiency of the ISMP process, accompanied by the release of precipitated metals, were observed for most conditions tested. The most dramatic observation of the failing ISMP process was observed within 12 weeks for the molasses amended column. Subsequent lowering the COD/ SO4(2-) ratio from 1.9 to 0.4 did not alter the outcome of sulfate reduction and metal precipitation efficiency in this set-up. Remarkably, after 6 months of inactivity, bacterial sulfate reduction was recovered in the molasses set up when the original COD/ SO4(2-) ratio of 1.9 was applied again. Intentional disruption of the lactate and HRC supplies resulted in an immediate stagnation of the ISMP processes and in a rapid release of precipitated metals into the column effluents. However, the ISMP process could be restored after substrate amendment. 16S rDNA-based DGGE analysis revealed that the SRB population, in accordance with the results of the previously performed batch experiments, consisted exclusively of members of the genus Desulfosporosinus. The community of Archaea was characterized by sequencing amplicons of archaeal and methanogen-specific PCR reactions. This approach only revealed the presence of non-thermophilic Crenarchaeota, a novel group of organisms which is only distantly related to methane producing Euryarchaeota. DGGE on the dsrB genes was successfully used to link the results of the ISMP process to the community composition of the sulfate reducing bacteria. CONCLUSIONS: In the case of an intentional disruption of substrate supply, the ISMP process failed most likely because the growth and activity of the indigenous SRB community stopped due to a lack of a carbon and electron donor. On the other hand, the cause of the sudden temporal shortcomings of the ISMP process in the presence of different substrates was not immediately clear. It was first thought to be the result of competition between methanogenic prokaryotes (MP) and sulfate reducers, since the formation of small amounts of CH4 (0.01-0.03 ppm ml(-1) was detected. However, the results of molecular analyzes indicate that methanogens do not constitute a major fraction of the microbial communities that were enriched in the column experiments. Therefore, we postulate that the SRB population becomes inhibited by the formed metal sulfides. RECOMMENDATION AND PERSPECTIVE: Our results indicate that the ISMP process is highly dependent on SRB-stimulation by substrate amendments and suggest that this remedial approach might not be viable for long-term application unless substrate amendments are continued and environmental conditions are strictly controlled. This will include the removal of affected aquifer material from the metal precipitation zone at the end of the remediation process, or removal of metal precipitates when the microbial activity decreases. Additional tests are necessary to investigate what will happen when clear groundwater passes through the reactive zone while no more C-sources are amended and all indigenous carbon is consumed. Also, the effects of dramatic increases in sulfate- or HM-concentrations on the SRB-community and the concomitant ISMP process need to be studied in more detail.     

Validation of the digital opacity compliance system under regulatory enforcement conditions

U.S. Environmental Protection Agency (EPA) Emission Measurement Center in conjunction with EPA Regions VI and VIII, the state of Utah, and the U.S. Department of Defense have conducted a series of long-term pilot and field tests to determine the accuracy and reliability of a visible opacity monitoring system consisting of a conventional digital camera and a separate computer software application for plume opacity determination. This technology, known as the Digital Opacity Compliance System (DOCS), has been successfully demonstrated at EPA-sponsored Method-9 "smoke schools", as well as at a number of government and commercially operated industrial facilities. Results from the current DOCS regulatory pilot study demonstrated that, under regulatory enforcement conditions, the average difference in opacity measurement between the DOCS technology and EPA Reference Method 9 (Method 9) was 1.12%. This opacity difference, which was computed from the evaluation of 241 regulated air sources, was found to be statistically significant at the 99% confidence level. In evaluating only those sources for which a nonzero visible opacity level was recorded, the