Characterizing the Occurrence,Sources, and Variability of Radon in Pacific Northwest Homes

A compilation of data from earlier studies of 172 homes in the Pacific Northwest indicated that approximately 65 percent of the 46 homes tested in the Spokane River Valley/Rathdrum Prairie region of eastern Washington/northern Idaho had heating season indoor radon (²²²Rn) concentrations above the U. S. EPA guideline of 148 Bq m^?3 (4 pCi L^?1). A subset of 35 homes was selected for additional study. The primary source of indoor radon in the Spokane River Valley/Rathdrum Prairie was pressure-driven flow of soil gas containing moderate radon concentrations (geometric mean concentration of 16,000 Bq m^?3) from the highly permeable soils (geometric mean permeability of 5 × 10^?11 m²) surrounding the house substructures. Estimated soil gas entry rates ranged from 0.4 to 39 m³h^?1 and 1 percent to 21 percent of total building air infiltration. Radon from other sources, including domestic water supplies and building materials was negligible. In high radon homes, winter indoor levels averaged 13 times higher than summer concentrations, while in low radon homes winter levels averaged only 2.5 times higher. Short-term variations in indoor radon were observed to be dependent upon indoor-outdoor temperature differences, wind speed, and operation of forced-air furnace fans. Forced-air furnace operation, along with leaky return ducts and plenums, and openings between the substructure and upper floors enhanced mixing of radon-laden substructure air throughout the rest of the building.     

Use of coatings to minimise acid emissions during ceramic tile firing

The manufacture of traditional ceramic products (ceramic tiles, roof tiles, and bricks) is often associated with the emission of F, Cl, and S compounds during the firing stage. According to the literature, fluorine emissions can be reduced by adding CaCO₃ to the raw materials mixture used in fabricating these products. However, data available to the authors indicate that this procedure, which has been successfully applied in manufacturing structural ceramics (roof tiles and bricks), is ineffective in ceramic tile manufacture and modifies tile end properties.This paper examines the possibility of reducing such emissions by applying coatings of alkaline-earth carbonates on to the ceramic tile bottom surface to retain the acid compounds emitted during tile firing. The effectiveness of MgCO₃, CaCO₃, SrCO₃, and BaCO₃ coatings for retaining these acid emissions was studied, using the evolved gas analysis (EGA) technique with a TG-DSC-FTIR-QM instrument.The SrCO₃ coating was found to provide the greatest retention, showing that SO₂ and HCl were retained more efficiently than HF. The presence of fluorides, chlorides, and sulphates of Ca, Sr, and Ba was verified in the respective fired coatings, confirming the existence of chemical reactions between the emitted acid compounds and the coating materials at high temperature.     

Surface geophysical exploration: developing noninvasive tools to monitor past leaks around Hanford’s tank farms

A characterization program has been developed at Hanford to image past leaks in and around the underground storage tank facilities. The program is based on electrical resistivity, a geophysical technique that maps the distribution of electrical properties of the subsurface. The method was shown to be immediately successful in open areas devoid of underground metallic infrastructure, due to the large contrast in material properties between the highly saline waste and the dry sandy host environment. The results in these areas, confirmed by a limited number of boreholes, demonstrate a tendency for the lateral extent of the underground waste plume to remain within the approximate footprint of the disposal facility. In infrastructure-rich areas, such as tank farms, the conventional application of electrical resistivity using small point-source surface electrodes initially presented a challenge for the resistivity method. The method was then adapted to directly use the buried infrastructure, specifically the steel-cased wells that surround the tanks, as “long” electrodes for both transmission of electrical current and measurements of voltage. Overcoming the drawbacks of the long electrode method has been the focus of our work over the past 7 years. The drawbacks include low vertical resolution and limited lateral coverage. The lateral coverage issue has been improved by supplementing the long electrodes with surface electrodes in areas devoid of infrastructure. The vertical resolution has been increased by developing borehole electrode arrays that can fit within the small-diameter drive casing of a direct push rig. The evolution of the program has led to some exceptional advances in the application of geophysical methods, including logistical deployment of the technology in hazardous areas, development of parallel processing resistivity inversion algorithms, and adapting the processing tools to accommodate electrodes of all shapes and locations. The program is accompanied by a full set of quality assurance procedures that cover the layout of sensors, measurement strategies, and software enhancements while insuring the integrity of stored data. The data have been shown to be useful in identifying previously unknown contaminant sources and defining the footprint of precipitation recharge barriers to retard the movement of existing contamination.     

The role of wax and resin in the nestmate recognition system of a stingless bee, Tetragonisca angustula

Recent research has shown that entrance guards of the stingless bee Tetragonisca angustula make less errors in distinguishing nestmates from non-nestmates than all other bee species studied to date, but how they achieve this is unknown. We performed four experiments to investigate nestmate recognition by entrance guards in T. angustula. We first investigated the effect of colony odours on acceptance. Nestmates that acquired odour from non-nestmate workers were 63% more likely to be rejected while the acceptance rate of non-nestmates treated with nestmate odour increased by only 7%. We further hypothesised that guards standing on the wax entrance tube might use the tube as an odour referent. However, our findings showed that there was no difference in the acceptance of non-nestmates by guards standing on their own colony’s entrance tube versus the non-nestmate’s entrance tube. Moreover, treatment of bees with nestmate and non-nestmate resin or wax had a negative effect on acceptance rates of up to 65%, regardless of the origin of the wax or resin. The role of resin as a source of recognition cues was further investigated by unidirectionally transferring resin stores between colonies. Acceptance rates of nestmates declined by 37% for hives that donated resin, contrasting with resin donor hives where acceptance of non-nestmates increased by 21%. Overall, our results confirm the accuracy of nestmate recognition in T. angustula and reject the hypothesis that this high level of accuracy is due to the use of the wax entrance tubes as a referent for colony odour. Our findings also suggest that odours directly acquired from resin serve no primary function as nestmate recognition cues. The lack of consistency among colonies plus the complex results of the third and fourth experiments highlight the need for further research on the role of nest materials and cuticular profiles in understanding nestmate recognition in T. angustula.     

Imaging of congenital Zika virus infection: the route to identification of prognostic factors

Zika virus (ZIKV) has recently emerged as a novel teratogenic agent associated with severe neurological complications. The risk associated with maternal infection remains to be exactly defined but appears to be significant. Like other TORCH agents (toxoplasmosis, other agents, rubella, cytomegalovirus and herpes simplex), it is unlikely that all affected fetuses will be symptomatic at birth. It is therefore urgent to better define the spectrum of anomalies observed in infected fetuses to provide adequate parental counseling. In this review, we provide a comprehensive analysis of major cases described to date and highlight specific prenatal and postnatal radiological findings of congenital ZIKV infection. A total of 19 reports were included in our analysis. ZIKV seemed to harbor a specific tropism for the central nervous system, and anomalies were mostly limited to the brain. Major radiological findings were ventriculomegaly, diffuse calcifications and signs of abnormal gyration as well as cortical development. In addition, a significant number of fetuses suffered from intra uterine growth restriction. Based on these findings, we provide recommendations for adequate radiological monitoring of at-risk pregnancies. © 2016 John Wiley & Sons, Ltd.