Runoff and soil loss from steep slopes treated with low cost bioengineering measures

Soil loss and surface runoff patterns were studied in erosion plots developed on manmade steep slopes (60 percent) over three years (1997–2000) in which rainfall ranged from 1338.4 to 1429.2 mm/year. Surface runoff and soil loss was examined under three different rainfall intensity classes. Runoff was mainly controlled by the rainfall distribution pattern on the seasonal scale. The soil loss was influenced by runoff during the first year. Both soil loss and runoff were reduced due to bioengineering measures in the first year irrespective of species planted. In the third year, combined effects of growth of grasses on protected plots, soil compaction and sediment exhaustion was noticed on runoff and soil loss. This was reflected by reduction in the runoff and soil loss from untreated and treated plots. In the high intensity class, reduction in runoff in treated plots was about 50 percent in three years and reduction in soil loss ranged between 94–95 percent in all plots. Physical treatment with brushwood structures was more efficient in erosion control in the low intensity class.     

Beryllium Concentrations in Ambient Air and Its Source Identification

Beryllium concentrations in atmospheric particulate and soil samples in and around a Beryllium Processing Facility (BPF) have been measured. The mean air concentration level of beryllium in and around the fence line of the BPF is 0.48 ± 0.43 ng m^-3 (n = 397) and is mostly influenced by diurnaland seasonal changes. The observed air concentration levelswere well below the prescribed ambient air quality (AAQ)standard of 10 ng m^-3. The soil concentration levels ofberyllium in the study area were found to be in the range of 1.42–2.75 g g^-1. The mass median aerodynamic diameter (MMAD)of beryllium aerosols in ambient air was found to be 6.9 m.Source identification using the Enrichment Factor (EF) approachindicates soil as the predominant contributory source for air concentrations at the site.     

A Review of the Fate and Effects of Silicones in the Environment

Silicones are well-known useful materials varying in structure, reactivity, and chemical and physical properties, but they all contain a covalent bond between the silicon atom and an organic group. Most common of these polymers are those based on polydimethylsiloxane (PDMS) having a siloxane (Si–O–Si) repeat unit and two methyl groups on each silicon atom. All these polymers are manmade, and the organosilicon linkage is not found in nature. It was therefore erroneously assumed that these polymers do not degrade naturally in the environment. It is the purpose of this review to refute this myth and to describe the degradation processes of PDMS in the environment and any potential ecological impact on the terrestrial, aquatic, and atmospheric compartments. Although it was found that minor degradation takes place by hydrolysis of PDMS to dimethylsilandiol followed by oxidation of the methyl group to aldehyde and ultimately to CO₂ by Arthobacter and Fusarium oxysporium schlechtendahl, the major degradation processes are abiotic. High molecular weight PDMS are initially depolymerized by soil hydrolysis of the siloxane bonds to yield organosilanol terminated oligomers. These organosilanols and low molecular weight linear PDMS and cyclics are evaporated into the atmosphere and are oxidized there by hydroxyl radicals to benign silica, water, and CO₂.     

Concentration of nitrite in respirable particulate matter of ambient air in Vadodara, Gujarat, India

Water extract of respirable particulate matter (RPM) was analyzed by Ion chromatography technique to investigate the presence of nitrite (NO2) as secondary aerosol in ambient environment. The nitrite particulates undergo photo hydroxyl radical reaction in environment produce nitrous acid, which reacts with metal and absorbs on RPM as water-soluble metal salt. The mean concentration of nitrite was 20.86 microg m(-3) in ambient environment. Regression analysis showed that the relationship for respirable particulate matter and nitrite (RPM-NO2, R2 = 0.742) was positively significant. We are reporting the presence of nitrite as an aerosol in ambient environment.     

Catalase and ascorbate peroxidase—representative H<Subscript>2</Subscript>O<Subscript>2</Subscript>-detoxifying heme enzymes in plants

Plants have to counteract unavoidable stress-caused anomalies such as oxidative stress to sustain their lives and serve heterotrophic organisms including humans. Among major enzymatic antioxidants, catalase (CAT; EC 1.11.1.6) and ascorbate peroxidase (APX; EC 1.11.1.11) are representative heme enzymes meant for metabolizing stress-provoked reactive oxygen species (ROS; such as H₂O₂) and controlling their potential impacts on cellular metabolism and functions. CAT mainly occurs in peroxisomes and catalyzes the dismutation reaction without requiring any reductant; whereas, APX has a higher affinity for H₂O₂ and utilizes ascorbate (AsA) as specific electron donor for the reduction of H₂O₂ into H₂O in organelles including chloroplasts, cytosol, mitochondria, and peroxisomes. Literature is extensive on the glutathione-associated H₂O₂-metabolizing systems in plants. However, discussion is meager or scattered in the literature available on the biochemical and genomic characterization as well as techniques for the assays of CAT and APX and their modulation in plants under abiotic stresses. This paper aims (a) to introduce oxidative stress-causative factors and highlights their relationship with abiotic stresses in plants; (b) to overview structure, occurrence, and significance of CAT and APX in plants; (c) to summarize the principles of current technologies used to assay CAT and APX in plants; (d) to appraise available literature on the modulation of CAT and APX in plants under major abiotic stresses; and finally, (e) to consider a brief cross-talk on the CAT and APX, and this also highlights the aspects unexplored so far.     

Chest deflections and injuries in oblique lateral impacts

A majority of laboratory-driven side-impact injury assessments are conducted using postmortem human subjects (PMHS) under the pure lateral mode. Because real-world injuries occur under pure and oblique modes, this study was designed to determine chest deflections and injuries using PMHS under the latter mode. Anthropometrical data were obtained and x-rays were taken. Specimens were seated on a sled and lateral impact acceleration corresponding to a change in velocity of 24 km/h was applied such that the vector was at an angle of 20 or 30 degrees. Chestbands were fixed at the level of the axilla (upper), xyphoid process (middle), and tenth rib (lower) location. Deflection contours as a function of time at the levels of the axilla and mid-sternum, representing the thorax, and at the tenth rib level, representing the abdomen, were evaluated for peak magnitudes. All data were normalized using mass-scaling procedures. Injuries were identified following the test at autopsy. Trauma graded according to the Abbreviated Injury Score, 1990 version, indicated primarily unilateral rib fractures and soft tissue abnormalities such as lung contusion and diaphragm laceration occurred. Mean peak deflections at the upper, middle, and lower levels of the chest for the 30-degree tests were 96.2, 78.5, and 76.8 mm. For the 20-degree tests, these magnitudes were 77.5, 89.9, and 73.6 mm. Statistical analysis indicated no significant (p > 0.05) differences in peak chest deflections at all levels between the two obliquities although the metric was significantly greater in oblique than pure lateral impacts at the mid and lower thoracic levels. These response data are valuable in oblique lateral impact assessments.     

Quantifying the connections—linkages between land-use and water in the Kathmandu Valley,Nepal

Land development without thoughtful water supply planning can lead to unsustainability. In practice, management of our lands and waters is often unintegrated. We present new land-use, ecological stream health, water quality, and streamflow data from nine perennial watersheds in the Kathmandu Valley, Nepal, in the 2016 monsoon (i.e., August and September) and 2017 pre-monsoon (i.e., April and May) periods. Our goal was to improve understanding of the longitudinal linkages between land-use and water. At a total of 38 locations, the Rapid Stream Assessment (RSA) protocol was used to characterize stream ecology, basic water quality parameters were collected with a handheld WTW multi-parameter meter, and stream flow was measured with a SonTek FlowTracker Acoustic Doppler Velocimeter. A pixel-based supervised classification method was used to create a 30-m gridded land use coverage from a Landsat 8 image scene captured in the fall of 2015. Our results indicated that land-use had a statistically significant impact on water quality, with built land-uses (high and low) having the greatest influence. Upstream locations of six of the nine watersheds investigated had near natural status (i.e., river quality class (RQC) 1) and water could be used for all purposes (after standard treatments as required). However, downstream RSA measurements for all nine watersheds had RQC 5 (i.e., most highly impaired). Generally, water quality deteriorated from monsoon 2016 to pre-monsoon 2017. Our findings reinforce the importance of integrated land and water management and highlight the urgency of addressing waste management issues in the Kathmandu Valley.     

Dynamism of household carbon emissions (HCEs) from rural and urban regions of northern and southern China

China contributes 23 % of global carbon emissions, of which 26 % originate from the household sector. Due to vast variations in both climatic conditions and the affordability and accessibility of fuels, household carbon emissions (HCEs) differ significantly across China. This study compares HCEs (per person) from urban and rural regions in northern China with their counterparts in southern China. Annual macroeconomic data for the study period 2005 to 2012 were obtained from Chinese government sources, whereas the direct HCEs for different types of fossil fuels were obtained using the IPCC reference approach, and indirect HCEs were calculated by input-output analysis. Results suggest that HCEs from urban areas are higher than those from rural areas. Regardless of the regions, there is a similarity in per person HCEs in urban areas, but the rural areas of northern China had significantly higher HCEs than those from southern China. The reasons for the similarity between urban areas and differences between rural areas and the percentage share of direct and indirect HCEs from different sources are discussed. Similarly, the reasons and solutions to why decarbonising policies are working in urban areas but not in rural areas are discussed.

     

Pretreatment of banana agricultural waste for bio-ethanol production: Individual and interactive effects of acid and alkali pretreatments with autoclaving,microwave heating and ultrasonication

Banana agricultural waste is one of the potential lignocellulosic substrates which are mostly un-utilized but sufficiently available in many parts of the world. In the present study, suitability of banana waste for biofuel production with respect to pretreatment and reducing sugar yield was assessed. The effectiveness of both acid and alkali pretreatments along with autoclaving, microwave heating and ultrasonication on different morphological parts of banana (BMPs) was studied. The data were statistically analyzed using ANOVA and numerical point prediction tool of MINITAB RELEASE 14. Accordingly, the optimum cumulative conditions for maximum recovery of reducing sugar through acid pretreatment are: leaf (LF) as the substrate with 25 min of reaction time and 180 °C of reaction temperature using microwave. Whereas, the optimum conditions for alkaline pretreatments are: pith (PH) as the substrate with 51 min of reaction time and 50 °C of reaction temperature using ultrasonication (US).     

Butyltins in water, biofilm, animals and sediments of the west coast of India

Biofilm, fish, oyster, mussel, clam, surface seawater, suspended particulate matter (SPM), and sediment samples were collected from marine and/or estuarine waters of the west coast of India. These samples were analysed for butyltin derivatives such as dibutyltin (DBT) and tributyltin (TBT). The concentrations DBT plus TBT varied between 2.4 and 8.3, 163 and 363 ng/l, 5 and 2853 ng/g dry wt in the SPM, seawater and sediment samples, respectively, of the Marmugao harbour. The values of DBT plus TBT ranged between 0.60 and 29, 123 and 242 ng/l and 1.4 and 65 ng/g dry wt in SPM, water and sediment samples, respectively, collected from the Mandovi estuary. In the Dona Paula Bay the DBT plus TBT varied from 10 to 89 ng/l in surface seawater, and TBT from 10 to 513 ng/g in biofilm samples. For the coastal sediment samples the concentration of DBT plus TBT ranged between 36 and 133 ng/g dry wt of sediment. For the animal samples the DBT plus TBT ranged between 58 and 825 ng/g dry wt of the tissue. Mussel tissues contained the highest amount of DBT plus TBT (825 ng/g dry wt tissue), whereas highest TBT concentration was recorded in the oyster (732 ng/g dry wt). TBT was generally the most abundant butyltin compound in most of the samples suggesting fresh inputs and/or less degradation of TBT. A wide range of the observed butyltin concentrations suggests the presence of localized areas of contamination. Leaching of tributyltin-containing antifouling paints from the ocean going ships, fishing and recreational boats, barges, and the inputs of TBT from the Goa shipyard and dry dock facility situated in the harbour are the probable sources of the DBT and TBT in the samples of the west coast of India. Higher levels of TBT were observed in biofilm relative to that in the surrounding seawater. When fed on TBT contaminated biofilm of the diatom Navicula subinflata, butyltin concentrations in the clam Paphia malabarica increased over the period of feeding suggesting the importance of biofilm in the transfer of butyltins to higher group of organisms.