A new neosuchian with Asian affinities from the Jurassic of northeastern Brazil

Phylogenetic relationships near the origin of extant crocodylians are weakly supported, and this lack of resolution makes for poor estimates of taxonomic and morphological diversity. Previously known taxa are found throughout the Cretaceous in Laurasia and at a few sites from Brazil, Australia, and northern Africa. Here, we report Batrachomimus pastosbonensis gen. et sp. nov. from the Late Jurassic of northeastern Brazil, which is deeply nested within Neosuchia and associated to the Cretaceous Asian paralligatorids. The new taxon predates all other members of Paralligatoridae and its immediate sister group (including Eusuchia) by 30 million years. A nearly complete skull, osteoderms, and limb bones were recovered, and autapomorphies of B. pastosbonensis include a scalloped lateral margin of the rostrum in dorsal view, unsculpted alveolar margin at the caudalmost portion of the maxilla, blunt lateral prongs on the jugal at the base of the postorbital bar, hourglass shaped choanae, and pterygoid choanal septum extended between the palatal shelves of the palatines. The crocodyloid-like skull proportions and the slender, conical teeth suggest an amphibious and piscivorous life history to this 1 m long animal.

     

Determining the Costs of Air Pollution Control

A general procedure has been described that can be followed for estimating the cost of reducing air pollution emissions within a metropolitan region. The six step procedure examines emission inventories, regional trends, control trends, alternate control schemes, control costs, and optimum cost-effectiveness. The procedure is illustrated for one emission source in the Delaware Valley. By application of “feasible controls,” automobile emissions were shown to be reduced from 4.5 billion pounds per year in the Region during 1968 to 1.5 billion pounds in the year 2000. Annual control costs during the same period will increase from $30 million to over $300 million per year. This represents a cost increase from $15 per registered vehicle in 1968 to about $58 per vehicle per year in 2000. A method was illustrated for determining minimum cost to achieve any desired degree of emission reduction where alternate feasible control schemes are available. This method is especially useful where the allocation of scarce resources is involved. The general procedure is applicable to any number of pollutants and emission sources, and may be useful for calculations in any metropolitan area. The objectives of the present study are to apply this method to other sources within the Delaware Valley and to determine total regional costs for various levels of emission reduction. As one example of a practical application for this type of analysis, the economic impact of regulatory schemes can be evaluated on a cost-effectiveness basis     

Some Basic Consideration in the Design of an Air Pollution Monitoring System

Quantified air quality and meteorological information provided by an air pollution monitoring system must be geared to the legally prescribed functions of the control agency. The network must be treated as a vital component of the total integrated data system that supports agency activities in air resources management and control. It should be closely interphased with data systems for emission inventory, registration and permits, violations and complaints, fuel use, emission reduction plans, land use, demographic projections, and urban planning. Compatibility with neighboring and statewide or regionwide data systems is essential for coordination of effort, especially under episode conditions.

The network should be planned on three levels, static, semi-automatic, and fully automatic, to provide monthly, daily, and up-to-the-minute measurements, respectively. Optimization of network specifications requires a three-way balance of hardware, control objectives, and agency resources (capital facilities, manpower, funding, etc.), of which the first two are realistically governed by the third.

A monitoring network could serve a wide range of functions, and there are pressures and temptations to cater to all possible users. A number of functions are listed; an order of priority should be determined. Experience shows that far more data tend to be generated than can be analyzed, assimilated, and utilized. Rapid data acquisition and on-line processing capabilities of present-day automatic networks could, without effective planning, result in mountainous backlogs of unassimilated information.

A systems engineering approach to planning will ascertain that preliminary requirements are critically scrutinized, and only genuine requirements that meet the test of constraints (natural environment, economic, legal, social, political constraints, and manpower resources) will be translated into performance specifications. By means of this approach, design characteristics that are extraneous or peripheral to the principal network functions can be identified as low priority luxuries, whereas seemingly expensive items may be justified on the basis of data reliability or long-range savings in operation and maintenance requirements.     

Effects of Fluoride on Agriculture

The effects of atmospheric fluorides on plants are summarized with respect to the level of biological organization at which they occur. The factors that determine the occurrence and degree of these effects are reviewed briefly. A series of economic effects on agriculture is postulated and its possible relationship to the botanical effects of fluorides is discussed.     

Effect of some herbicides on activities of microorganisms and enzymes in soil

Abstract

Laboratory tests were conducted with eight herbicides, atrazine, butylate, ethalfluralin, imazethapyr, linuron, metolachlor, metribuzin and trifluralin, applied to a loamy sand at rate of 10 μg/g to determine if these materials caused any serious effects on microbial and enzymatic activities related to soil fertility. Some herbicides showed an effect on bacteria and fungi for the first week of incubation, but, subsequently, the populations returned to levels similar to those obtained in the controls. After several herbicide treatments there appeared to cause a slight depression of nitrification. Sulfur oxidation was better than that obtained with untreated soil in all treatments. Oxygen consumption was increased significantly after 96 hr incubation with atrazine. The soil dehydrogenase and amylase activities were inhibited by ethalfluralin treatment respectively for 1 wk and 1 day, and p‐nitrophenol liberation was inhibited for 2 hrs by all herbicide treatments. Results indicated that the herbicidal treatments at the level tested were not drastic enough to be considered deleterious to soil microbial and enzymatic activities which are important to soil fertility.     

Gas-phase reaction of (E)-β-farnesene with ozone: Rate coefficient and carbonyl products

The gas-phase ozonolysis of (E)-β-farnesene was investigated in a 3.91 m³ atmospheric simulation chamber at 296 ± 2 K and relative humidity of around 0.1%. The relative rate method was used to determine the reaction rate coefficient of (4.01 ± 0.17) × 10^?16 cm³ molecule^?1 s^?1, where the indicated errors are two least-squares standard deviations and do not include uncertainties in the rate coefficients for the reference compounds (γ-terpinene, cis-cyclooctene and 1,5-cyclooctadiene). Gas phase carbonyl products were collected using a denuder sampling technique and analyzed with GC/MS following derivatization with O-(2,3,4,5,6-pentafluorobenzyl) hydroxylamine (PFBHA). The reaction products detected were acetone, 4-oxopentanal, methylglyoxal, 4-methylenehex-5-enal, 6-methylhept-5-en-2-one, and (E)-4-methyl-8-methylenedeca-4,9-dienal. A detailed mechanism for the gas-phase ozonolysis of (E)-β-farnesene is proposed, which accounts for all of the products observed in this study. The results of this work indicate that the atmospheric reaction of (E)-β-farnesene with ozone has a lifetime of around 1 h and is another possible source of the ubiquitous carbonyls, acetone, 4-oxopentanal and 6-methylhept-5-en-2-one in the atmosphere.     

Pentachlorotoluene and pentabromotoluene: Results of a subacute and a subchronic toxicity study in the rat

Abstract

Pentachlorotoluene (PCT) and pentabromotoiuene (PBT) are environmental contaminants detected in the Great Lakes ecosystem. In view of the paucity of toxicity data and the potential for human exposure, a subacute (28 day) and a subchronic (91 day) study were conducted in the rat. In the subacute study, groups of 10 male and 10 female rats were fed the diet containing PCT or PBT at 0, 0.5, 5.0, 50 or 500 ppm for 28‐days. In the subchronic study, the group size was increased to 15, the dose levels were 0, 0.05, 0.5, 5.0, 50 and 500 ppm in the diet and the exposure period was 91 days. Growth rate and food consumption were not affected by exposure to either chemical in the subacute and subchronic study. Clinical observations revealed no abnormalities. Decreased hemoglobin was observed in female rats fed 5.0 ppm PCT and higher levels in the subacute (28 day) study. In the same study the hematocrit value and erythrocyte numbers of females fed 5.0 or 500 ppm PCT diets were significantly lower than the control. In both subacute and subchronic studies mild dose‐dependent histopathological changes were observed in the thyroid, liver and kidney of rats fed PCT and PBT diets. In general male rats were more susceptible than females to the treatment of PCT and PBT. Based on these data, it was concluded that the no observable adverse effect level for PCT was 50 ppm in the diet (3.5 mg/kg b.w./day) and that of PBT was 5.0 ppm (0.35 mg/kg b.w./day).     

Influence of tobacco smoke on carcinogenic PAH composition in indoor PM10 and PM2.5

Because of the mutagenic and/or carcinogenic properties, Polycyclic Aromatic Hydrocarbons (PAH), have a direct impact on human population. Consequently, there is a widespread interest in analysing and evaluating the exposure to PAH in different indoor environments, influenced by different emission sources. The information on indoor PAH is still limited, mainly in terms of PAH distribution in indoor particles of different sizes; thus, this study evaluated the influence of tobacco smoke on PM₁₀ and PM_2.5 characteristics, namely on their PAH compositions, with further aim to understand the negative impact of tobacco smoke on human health. Samples were collected at one site influenced by tobacco smoke and at one reference (non-smoking) site using low-volume samplers; the analyses of 17 PAH were performed by Microwave Assisted Extraction combined with Liquid Chromatography (MAE–LC). At the site influenced by tobacco smoke PM concentrations were higher 650% for PM₁₀, and 720% for PM_2.5. When influenced by smoking, 4 ring PAH (fluoranthene, pyrene, and chrysene) were the most abundant PAH, with concentrations 4600–21 000% and 5100–20 800% higher than at the reference site for PM₁₀ and PM_2.5, respectively, accounting for 49% of total PAH (Σ_PAH). Higher molecular weight PAH (5–6 rings) reached concentrations 300–1300% and 140–1700% higher for PM₁₀ and PM_2.5, respectively, at the site influenced by tobacco smoke. Considering 9 carcinogenic PAH this increase was 780% and 760% in PM₁₀ and PM_2.5, respectively, indicating the strong potential risk for human health. As different composition profiles of PAH in indoor PM were obtained for reference and smoking sites, those 9 carcinogens represented at the reference site 84% and 86% of Σ_PAH in PM₁₀ and PM_2.5, respectively, and at the smoking site 56% and 55% of Σ_PAH in PM₁₀ and PM_2.5, respectively. All PAH (including the carcinogenic ones) were mainly present in fine particles, which corresponds to a strong risk for cardiopulmonary disease and lung cancer; thus, these conclusions are relevant for the development of strategies to protect public health.