A harvest failure approach to assess the threat from an invasive species

We present the idea of using potential infringements on annual allowable harvest targets as an approach to estimate threats from invasive species to the forest products sector. The approach uses present-day harvest levels as a reference level to estimate when and where the impact of a nonnative forest pest could become economically damaging. We use a generic model that simulates spread and damage by nonnative invasive species, basic harvest and forest growth through time. The concept is illustrated with a case study of a new nonnative invasive pest, Sirex noctilio Fabricius on pine resources in eastern Canada. Impacts of invasion on wood supply, in particular, the point at which present-day harvest levels are not attainable, were identified for 77 non-overlapping geographical regions that delimit the primary wood supply areas around large mills and wood processing facilities in eastern Canada. The results identify the minimum area of a pest outbreak that could trigger harvest shortages (approximately 12.5–14 M ha of pine forests in Ontario and Quebec). Beyond this level, the amount of host resource available for harvesting in any given year declines rapidly. The failure to sustain broad-scale harvest targets may be an attractive and intuitive indicator for policy makers and regulators interested in developing control and “slow-the-spread” programs for non-native forest pests.     

The Surface Roughness of a Rubber Soling Material Determines the Coefficient of Friction on Water-Lubricated Surfaces

For more than a decade, evidence has been accumulating that points to the fact that the microscopic roughness of the footwear soling surface is a major determinant of slip-resistance on lubricated surfaces, but conclusive experimental proof has been lacking. This article describes an experiment in which five pairs of shoes were soled with the same rubber compound. Four of the pairs were abraded by different grades of grit to produce a range of roughness values. The coefficient of friction (CoF) of the five solings was then measured repeatedly by the walking traction method on wet surfaces including glazed wall tiles, vinyl asbestos coated with the wax floor polish, and both sides of a sheet of float glass. The Kruskal-Wallis statistical test proved beyond doubt that the soling roughness is a major factor in determining the CoF of this rubber soling material; p < 10⁻⁵. Nearly all of the grip was due to surface roughness of the soling material on these atypically smooth floors, although the surface roughness of the floors also had a significant effect on CoF; p < 0.003. Float glass is shown to be a promising reference floor material for the measurement of CoF of footwear; there was no statistical difference between results for the two sides of the glass sheet. Float glass could be used in the development of a standard CoF test method because new sheets of glass from the same manufacturer are identical and extremely smooth. The specification of CoF values for solings/floors combinations in lubricated conditions is of little value unless associated with roughness measurements and knowledge of how wear will affect the surface roughness of the sole. This article reports the first evidence that any specification of flooring by measuring CoF based on dry surfaces could lead to an increase in the number of injuries caused by slipping on the wet surfaces. Published by Elsevier Science Ltd     

Development and Implementation of Strategic Frameworks for Air Quality Management in the UK and the European Community

The UK and the EC have recognized that the application of national and EC policies alone may not be cost effective in improving air quality in some areas, especially in traffic-congested urban centres and along major road transport corridors. Consequently both have introduced new strategic frameworksfor air quality management.This paper outlines and compares the UK National Air Quality Strategy (NAQS) and the EC approach, set out in the Air Quality Framework and Daughter Directives. Both frameworks shift responsibility for reviewing, assessing and managing air quality on to local authorities. The UK considers the NAQS will provide the principal means of carrying out its commitments under the new EC framework.Local authorities in the UK have begun the review and assessment phase of the NAQS. This paper examines the support that central government has had to provide to local authorities to ensure the NAQS will be effective. It offers insights into what other Member States are likely to face when implementing their interpretation of the EC air quality management framework. The paper highlights that many UK local authorities lacked even basic air quality management capabilities when the NAQS was being formulated. Consequently the UK Government has had to expand the national pollution monitoring networks (this was achieved primarily by affiliating the growing number of local authority funded sites), commission new detailed urban emissions inventories, and develop and validate a suite of air quality dispersion models. Training events in air quality assessment techniques have had to be offered and many detailed guidance notes issued to ensure an appropriate and consistent interpretation of the NAQS. Some government initiatives to support the implementation of the NAQS suffered delays which initially caused some unnecessary uncertainties and inconsistencies amongst local authorities conducting their review and assessment of air quality. This points to the importance of the Governmentensuring that the support for the management phase of the NAQS will be in place in time. This includes providing additional pollution-control powers and reformulating transport and planning policies in order to integrate air quality management more fully.     

A course in Environmental Planning and Management

Summary This paper describes a 13-weeks, third-year course in Environmental Planning and Management developed and taught by the authors. Initiated in 1969, the course consists of a mix of lectures, seminars, workshop/laboratory sessions and field-based projects. The objectives of the course are for students: to become aware of the need for, and the complexities of, environmental management; to be able to criticise constructively work done by environmental agencies and consultants, managers and decision makers; and to learn and apply some of the methods and techniques used in environmental management.Topics covered by the current syllabus are: concepts of resource and environment; constitutional aspects; international law and the environment; Australian and Canadian environmental legislation and agencies; human manipulation of ecosystems; energy subsidies; modification of biogeochemical cycles; population dynamics and cropping; fisheries; national parks and reserves—policies in different countries; international heritage areas; environmental assessment (including impact assessment, land evaluation, land capability and land suitability assessment); and regional, integrated land-use and environmental planning and management. Techniques taught include: field surveys and interviewing; laboratory analysis of selected water quality, sediment and soil parameters including nutrient concentrations, heavy metal and pesticide residues; and for some students, applications of geographic information systems (GIS) technology following preceding GIS courses.A major problem is selecting the most appropriate mix between the social and natural sciences—appropriate, first in terms of students' heterogeneous skills and backgrounds, and second, in terms of understanding the causes of environmental problems and issues, and devising practicable solutions.     

Phosphorus speciation in broiler litter and turkey manure produced from modified diets

Modifying poultry diets by reducing mineral P supplementation and/or adding phytase may change the chemical composition of P in manures and affect the mobility of P in manure-amended soils. We studied the speciation of P in manures produced by broiler chickens and turkeys from either normal diets, or diets with reduced amounts of non-phytate phosphorus (NPP) and/or phytase, using a combination of chemical fractionation and synchrotron X-ray absorption near edge structure (XANES) spectroscopy. All broiler litters were rich in dicalcium phosphate (65-76%), followed by aqueous phosphate (13-18%), and phytic acid (7-20%); however, no hydroxylapatite was observed. Similarly, normal turkey manure had 77% of P as dicalcium phosphate and had no hydroxylapatite, while turkey manure from diets that had reduced NPP and phytase contained equal proportions of dicalcium phosphate (33-45%) and hydroxylapatite (35-39%). This is attributed to the higher total Ca to P ratio (>2) in modified turkey manures that resulted in transformation of more soluble (dicalcium phosphate) to less soluble P compounds (hydroxylapatite). Chemical fractionation showed that H2O-extractable P was the predominant form in broiler litter (56-77%), whereas aqueous phosphate determined with XANES was <18% indicating that H2O probably dissolved mineral forms of P (e.g., dicalcium phosphate). Results show that HCl extraction primarily removed phytic acid from broiler litters and normal turkey manure, while it removed a mixture of hydroxylapatite and phytic acid from modified turkey manures. The combination of chemical fractionation and XANES provided information about the nature of P in these manures, which may help to devise best management practices for manure use.     

Maximizing returns on mentoring: factors affecting subsequent protégé performance

This study examined the effects of mentor success, relationship duration, and the amount of mentoring received on protégés' performance after the supervisory mentoring relationship had ended. Data collected from former protégés paired with objective measures of performance indicated that a mentor's success moderated the impact of mentoring functions received on subsequent protégé success. Additionally, the strength of these relationships depended on the length of the mentoring relationship. The present study suggests more emphasis should be placed on the capabilities of the mentor. Copyright © 2006 John Wiley & Sons, Ltd.     

A molecular genetic analysis of social structure, dispersal, and interpack relationships of the African wild dog (Lycaon pictus )

The African wild dog is a highly social, pack-living predator of the African woodland and savannah. The archetypal wild dog pack consists of a single dominant breeding pair, their offspring, and non-breeding adults who are either offspring or siblings of one of the breeding pair. Non-breeding adults cooperate in hunting, provisioning and the protection of young. From these observations follows the prediction that the genetic structure of wild dogs packs should resemble that of a multigenerational family, with all same-sexed adults and offspring within a pack related as sibs or half-sibs. Additionally, a higher kinship between females from neighboring packs should be evident if females tend to have small dispersal distances relative to males. We test these predictions through analysis of mitochondrial DNA control region sequences and 14 microsatellite loci in nine wild dog packs from Kruger National Park, Republic of South Africa. We show that as predicted, African wild dog packs generally consist of an unrelated alpha male and female, subdominant close relatives, and offspring of the breeding pair. Sub-dominant wild dogs occasionally reproduce but their offspring rarely survive to 1 year of age. Relatedness influences the timing and location of dispersal events as dispersal events frequently coincide with a change in pack dominance hierarchy and dispersers often move to areas with a high proportion of close relatives. Received: 22 February 1996 / Accepted after revision: 16 November 1996     

Principal biogeochemical factors affecting the speciation and transport of mercury through the terrestrial environment

It is increasingly becoming known that mercury transport and speciation in the terrestrial environment play major roles in methyl-mercury bioaccumulation potential in surface water. This review discusses the principal biogeochemical reactions affecting the transport and speciation of mercury in the terrestrial watershed. The issues presented are mercury-ligand formation, mercury adsorption/desorption, and elemental mercury reduction and volatilization. In terrestrial environments, OH-, Cl- and S- ions have the largest influence on ligand formation. Under oxidized surface soil conditions Hg(OH)2, HgCl2, HgOH+, HgS, and Hg0 are the predominant inorganic mercury forms. In reduced environments, common mercury forms are HgSH+, HgOHSH, and HgClSH. Many of these mercury forms are further bound to organic and inorganic ligands. Mercury adsorption to mineral and organic surfaces is mainly dictated by two factors: pH and dissolved ions. An increase in Cl- concentration and a decrease in pH can, together or separately, decrease mercury adsorption. Clay and organic soils have the highest capability of adsorbing mercury. Important parameters that increase abiotic inorganic mercury reduction are availability of electron donors, low redox potential, and sunlight intensity. Primary factors that increase volatilization are soil permeability and temperature. A decrease in mercury adsorption and an increase in soil moisture will also increase volatilization. The effect of climate on biogeochemical reactions in the terrestrial watershed indicates mercury speciation and transport to receiving water will vary on a regional basis.     

Bioaccumulation of PCBs in Arctic seabirds: influence of dietary exposure and congener biotransformation

Four seabird species and their prey (zooplankton or fish) were collected in the Barents Sea to determine how dietary exposure, cytochrome P450 (CYP) enzyme activities and sex influenced their hepatic PCB concentrations and accumulation patterns. Five males and five females from each seabird species (little auk (Alle alle), Brunnich's guillemot (Uria lomvia), black guillemot (Cepphus grylle) and black-legged kittiwake (Rissa tridactyla)) were analysed. PCB concentrations could not be explained directly by carbon source (delta13C) or trophic position (delta15N), but by a combination of dietary parameters (delta13C, delta15N, migratory pattern, age) and contaminant metabolism. Contrary to previous studies, the PCB pattern differed among seabirds, with a higher proportion of persistent congeners (% of PCB-153, RPCB-153) in black-legged kittiwake than in auks. The PCB pattern also differed among auks, with little auk as the most efficient biotransformer (highest RPCB-153 values of persistent congeners). Based on high RPCB-153 values, Brunnich's guillemot poorly metabolised ortho-meta-unsubstituted congeners, whereas black guillemot poorly metabolised meta-para unsubstituted congeners. Species-specific differences in PCB biotransformation were confirmed by metabolic indices, where PCB patterns in seabirds were adjusted for PCB pattern in prey. The relative contribution of ortho-meta-unsubstituted congeners to SigmaPCBs decreased with increasing EROD activity. There were no differences in PCB concentrations, PCB patterns or cytochrome P450 enzyme activities between males and females. CYP P450 activities (CYP1A- and CYP2B/3A-like: EROD and testosterone 6beta-hydroxylation, respectively) were low and did not correlate with concentrations of non- or mono-ortho Cl-substituted PCBs (NO- and MO-PCBs), or with total toxic equivalent concentrations (TEQs) for dioxin-like effects of NO- and MO-PCBs.