Investigation of seat belt use among the drivers of different education levels

Seat belt use habit has been investigated according to the education level of drivers. Copies of a questionnaire were distributed to 1000 participants of four different education levels. Factors such as seat belt usage habit, restricting factors and crash data have been investigated. Data have been analyzed with SPSS 15.0 software. Increased level of education leads to increased seat belt usage, lower numbers of crashes and crash severities. The factors restricting seat belt use are lack of habit, discomfort and short distance driving. The use of precaution signal and increases in comfort can increase seat belt usage. The primary and high school education on traffic safety and seat belt usage has been serving the purpose.     

Thermal strain in fire fighters while wearing task-fitted versus en 469:2005 protective clothing during a prolonged rescue drill.

Fire fighters are normally overprotected during their working hours because of the tendency to keep the personal protection level sufficiently high in case of the worst possible scenarios. This study investigated the effects of task-fitted protective clothing on thermal strain in fire fighters as compared to EN 469:2005 protective clothing during a prolonged (2 1/2 hrs) job-related rescue drill under neutral and hot climates. The subjects were 23 healthy, physically fit professional male fire fighters aged 26-44 years. Measurements included cardiovascular and thermal responses and subjective assessments. Wearing task-fitted clothing during rescue tasks in a neutral climate considerably reduced total thermal and cardiovascular strain in prolonged rescue work. The fire fighters also perceived physical work as significantly harder on average, and reported more intense subjective discomfort while wearing EN 469:2005 as compared to task-fitted clothing.     

Assessment of Ecological Quality of the Tajan River in Iran Using a Multimetric Macroinvertebrate Index and Species Traits

The objectives of this study were to assess the biological water of the Iranian Tajan River using different metrics, i.e., a Multimetric Macroinvertebrate Index (MMI) and a traits-based method. Twenty-eight physico-chemical parameters, 10 habitat factors, and abundance of macroinvertebrates were obtained for 17 sites. The Shahid-Rajaie dam divides the Tajan River into an up- and downstream part, with different land uses. Eighteen metrics were used to represent four components of ecosystem quality, including tolerance (Hilsenhoff, SIGNAL), diversity (Margalef, Shannon–Wiener, Simpson, and Evenness), abundance (total number of taxa, individuals, Ephemeroptera, Plecoptera, Trichoptera, EPT, and Insects), and composition of assemblages (% Ephemeroptera, % Plecoptera, % Trichoptera, and % EPT Taxa). The integrated MMI was calculated by averaging the obtained scores of all indices. In the next step, we gathered information on 22 biological traits of macroinvertebrates to evaluate whether (group of) traits could be identified that are indicative for specific or general stress. Result showed a decrease in MMI from upstream (very good water quality) to downstream (bad) due to human activities. Industrial activities like pulping and papermaking operations or sand mining in the downstream part had more effects than agriculture and fish ponds in the upstream part. A redundancy analysis biplot showed the variation between the modalities of trait of macroinvertebrates and their correlation with physico-chemical parameters in Tajan River. The findings show that traits can be indicative for different kind of stress but that more effort has to be put in gathering data sets to disentangle the effect of habitat quality, pollution, and the physico-chemical properties of high- versus lowland rivers.     

The Detection Rate of Enteric Viruses and <Emphasis Type="Italic">Clostridium difficile</Emphasis> in a Waste Water Treatment Plant Effluent

Waste water treatment plant (WWTP) is considered as an important source of surface water contamination by enteric pathogens. In this study, we describe the occurrence of enteric viruses (group A rotaviruses, noroviruses, astroviruses, sapoviruses, hepatitis A virus, and hepatitis E virus) and Clostridium difficile in the effluent of a wastewater treatment plant during a 1-year period. Enteric viruses were simultaneously and efficiently concentrated in a single step using methacrylate monolithic chromatographic support. Rotaviruses, noroviruses (genogroup I and II), and sapoviruses were detected in all 12 concentrated samples, whereas astroviruses were not detected in August and September and hepatitis A and E viruses were not detected at all. Clostridium difficile was detected in all samples and altogether 121 strains were isolated and grouped into 32 different ribotypes of which 014/020 and 010 were most prevalent. Pathogens detected in WWTP effluent partially reflect the epidemiological situation of enteric viruses and C. difficile in human population and open the discussion on implementation of possible techniques for virus and bacteria removal from WWTP effluent prior to release into the surface water system.     

Distant agricultural landscapes

This paper examines the relationship between the development of the dominant industrial food system and its associated global economic drivers and the environmental sustainability of agricultural landscapes. It makes the case that the growth of the global industrial food system has encouraged increasingly complex forms of “distance” that separate food both geographically and mentally from the landscapes on which it was produced. This separation between food and its originating landscape poses challenges for the ability of more localized agricultural sustainability initiatives to address some of the broader problems in the global food system. In particular, distance enables certain powerful actors to externalize ecological and social costs, which in turn makes it difficult to link specific global actors to particular biophysical and social impacts felt on local agricultural landscapes. Feedback mechanisms that normally would provide pressure for improved agricultural sustainability are weak because there is a lack of clarity regarding responsibility for outcomes. The paper provides a brief illustration of these dynamics with a closer look at increased financialization in the food system. It shows that new forms of distancing are encouraged by the growing significance of financial markets in global agrifood value chains. This dynamic has a substantial impact on food system outcomes and ultimately complicates efforts to scale up small-scale local agricultural models that are more sustainable.     

微孔曝气与覆盖对城市重污染河道底泥磷形态分布及释放过程的影响

采用自行研发的泥-水界面微孔曝气系统,开展了底泥表面曝气和覆盖对城市重污染河道底泥磷释放及形态分布规律的影响研究.结果表明,微孔曝气能够有效提高上覆水的溶解氧(DO)和沉积物的氧化还原电位(Eh),能够将泥-水界面Eh维持在-100 m V左右,DO提高到6 mg·L-1以上.与对照比较,原位覆盖处理的上覆水DO和Eh有一定提高,但仍明显低于微孔曝气处理.与对照相比较,微孔曝气处理均有效降低上覆水中总磷(TP)和溶解性正磷酸盐(PO3-4)的含量.试验结束时,微孔曝气(A)和微孔曝气+原位覆盖处理(A+C)上覆水中TP含量由初始的0.201 mg·L-1分别降至0.062 mg·L-1和0.050 mg·L-1;上覆水中PO3-4含量由0.086 mg·L-1和0.078 mg·L-1分别降至0.026 mg·L-1和0.023 mg·L-1.与对照相比,微孔曝气处理明显降低了底泥间隙水中TP的浓度,在整个培养期间,其TP含量平均下降38.8%(A)和47.9%(A+C).底泥原位覆盖处理对抑制泥-水界面磷释放能力要弱于微孔曝气处理,而且在试验后期(50 d),上覆水中TP和PO3-4的含量均有所反弹.不管有无覆盖,泥-水界面微孔曝气处理均显著改变了表层底泥磷形态分布特征,显著降低了底泥中铁铝结合态磷(Fe/Al-P)组分比例,而钙结合态磷(Ca-P)含量比例却出现明显增加.单一的表面覆盖处理对底泥磷形态分布特征没有显著影响(P0.05).研究表明,与单一的处理效果相比较,泥-水界面纳米微孔曝气处理,并结合底泥原位覆盖,更有利于抑制城市重污染河道泥-水界面中磷的释放风险.     

典型印染废水处理过程中芳香烃化合物的污染特征及污泥生态风险评价

采用GC-MS测定了典型综合印染废水处理厂废水和污泥中芳香烃化合物的含量.结果表明,原水中苯系物总量为203.96±15.18μg·L-1,其中二甲苯占62.7%,尾水中苯系物总量为0.2±0.029μg·L-1,整个处理工艺对苯系物的去除效率为99%.原水中多环芳烃(PAHs)总浓度达1349.51±35.77 ng·L-1,以3—6环为主,主要富集在颗粒物上.整个工艺对PAHs的去除效率为95%,尾水中PAHs总浓度为65.81±20.99ng·L-1,以2—3环为主.干污泥中PAHs含量高达2996.10±151.0 ng·g-1,污泥吸附为水相中PAHs去除的主要机理之一.印染污泥直接填埋或农用会引起潜在的生态危害.     

Influence of x-ray diffraction sample preparation on quantitative mineralogy: implications for chromate waste treatment

Powders of chromite ore processing residue (COPR) were mineralogically evaluated using quantitative X-ray powder diffraction (XRPD) to illustrate the impacts of sample preparation procedures. Chromite ore processing residue is strongly alkaline, reactive, contains minerals of varying hardness and absorption coefficients, and exhibits significant amorphicity. This poses a challenge to produce powders for XRPD analysis that are sufficiently fine and of uniform particle size while avoiding mineral reactions and overgrinding effects. Dry, hand pulverization to different grain sizes, and wet, mechanical pulverization (micromilling) using four milling liquids (cyclohexane, isopropanol, ethanol, and water), and variable milling durations (up to 15 min) were evaluated. Micromilling with a light, nonpolar, highly evaporative liquid such as cyclohexane with a milling time of 5 min mitigated systematic errors such as microabsorption and preferred orientation as it produced finer and more uniform particle size distributions than the hand-pulverized powders, while simultaneously affording the least time for sample preparation. Conversely, the use of water as milling liquid resulted in extensive hydration reactions during sample preparation, causing mischaracterization and significant underestimation of its reactive brownmillerite content, which can complicate the remediation design process for COPR. Hand pulverization emerged as a necessary complement to quantify Cr(VI)-containing, softer minerals destroyed during mechanical milling, the quantification of which has also important implications for COPR treatment design. The findings of this study may be applicable in a variety of geochemically complicated and reactive environmental media (metal-contaminated soils, stabilized/solidified media, inorganic waste), and points to the importance of the sample preparation method to obtain reliable quantitative XRPD results.