The Crisis Map of the Czech Republic: the nationwide deployment of an Ushahidi application for disasters

Crisis mapping is a legitimate component of both crisis informatics and disaster risk management. It has become an effective tool for humanitarian workers, especially after the earthquake in Haiti in 2010. Ushahidi is among the many mapping platforms on offer in the growing field of crisis mapping, and involves the application of crowdsourcing to create online and interactive maps of areas in turmoil. This paper presents the Crisis Map of the Czech Republic, which is the first such instrument to be deployed nationwide in Central Europe. It describes the methodologies used in the preparatory work phase and details some practices identified during the creation and actual employment of the map. In addition, the paper assesses its structure and technological architecture, as well as its potential possible development in the future. Lastly, it evaluates the utilisation of the Crisis Map during the floods in the Czech Republic in 2013.     

Voltammetric determination of platinum at a lead film electrode in environmental water samples

The paper presents the first report on the application of a lead film electrode for the determination of ultratrace concentrations of platinum. The procedure is based on preconcentration of the Pt(IV)-formaldehyde complexes at an in situ plated lead film electrode held at ?0.9 V (vs. Ag/AgCl), followed by a negatively sweeping differential pulse voltammetric scan. The composition of the supporting electrolyte, the influence of accumulation potential and time on the sensitivity of platinum responses are discussed. The detection limit of Pt(IV) with the accumulation time of 60 was equal to 9.2?×?10^?12 mol L^?1. The application of this method was tested by recovery of Pt(IV) from spiked environmental water samples.     

Variations of arsenic species content in edible Boletus badius growing at polluted sites over four years

The content of arsenic (As) in mushrooms can vary depending on the concentration level of this metalloid in the soil/substrate. The present study evaluated the content of arsenic in Boletus badius fruiting bodies collected from polluted and non-polluted sites in relation to the content of this element in overgrown substrate. It was found that mushrooms from the arsenic-polluted sites contained mean concentrations from 49 to 450 mg As kg^?1 dry matter (d.m.), with the greatest content found for specimens growing in close proximity of sludge deposits (490±20 mg As kg^?1d.m.). The mean content of total arsenic in mushrooms from clean sites ranged from 0.03 to 0.37 mg kg^?1 It was found that B. badius could tolerate arsenic in soil substrate at concentrations of up to 2500 mg kg^?1, at least. In different years of investigation, shifts in particular arsenic forms, as well as a general increase in the accumulation of organic arsenic content, were observed. The results of this study clearly indicate that B. badius should not be collected for culinary purposes from any sites that may be affected by pollution.     

Simultaneous gas chromatographic determination of chlorpyrifos and its impurity sulfotep in liquid pesticide formulations

An analytical method for simultaneous determination of the active substance (chlorpyrifos) and its relevant impurity (sulfotep) in commercial pesticide formulations has been developed and validated. The proposed method entails extraction of the analytes from samples by sonication with acetone and analysis by gas chromatography-flame ionization detection (GC-FID). The proposed method was characterized by satisfactory accuracy and precision. The repeatability expressed as relative standard deviation (RSD) was lower than the acceptable values calculated from the modified Horwitz equation whereas individual recoveries were in the range of 98–102% and 80–120% for chlorpyrifos and sulfotep, respectively. The limit of quantification (LOQ) for the impurity (sulfotep) was 0.003 mg mL^?1 corresponding to the maximum permitted level according to Food and Agricultural Organization of the United Nations (FAO) specifications for the active substance (chlorpyrifos) being 3 g kg^?1 of the chlorpyrifos content found. The main advantage of the proposed method was a considerable reduction in the analysis time since both analytes were determined based on a single injection into the GC-FID. Analysis of real samples of commercial pesticide formulations confirmed fitness-for-purpose of the proposed method.     

Comparison of fatty acid profile in the chicken meat after feeding with narasin,nicarbazin and salinomycin sodium and phyto-additive substances

The purpose of this study was an experimental investigation and a statistical evaluation of the influence of various additives in feed mixtures of broiler chickens on fatty acids content and their ratio in breast and thigh muscles. First feed additive consisted of narasin, nicarbasin and salinomycin sodium, and other five additives were of phytogenic origin. In vivo experiment was realized on the poultry experimental station with deep litter breeding system. A total of 300 one-day-old hybrid chickens Cobb 500 divided into six groups were used for the experiment. The experimental period was divided into four phases, i.e. Starter, Grower 1, Grower 2 and Final, according to the application of commercial feed mixture of soy cereal type. Additive substances used in feed mixtures were different for each group. Basic feed mixtures were equal for all groups. Fatty acid profile of breast and thigh muscles was measured by the method of FT IR Nicolet 6700. Investigated additive substances in the feed mixtures did not have statistically significant effect on fatty acid content and omega-6/omega-3 polyunsaturated fatty acid (PUFA) ratio in breast and thigh muscles. Strong statistically significant relation between omega-6 PUFAs and total PUFAs were proved by experiment. A relation between omega-3 PUFAs and total PUFAs was found only in the group with Biocitro additive.     

Abiotic degradation of chlorinated ethanes and ethenes in water

INTRODUCTION: Chlorinated ethanes and ethenes are among the most frequently detected organic pollutants of water. Their physicochemical properties are such that they can contaminate aquifers for decades. In favourable conditions, they can undergo degradation. In anaerobic conditions, chlorinated solvents can undergo reductive dechlorination. DEGRADATION PATHWAYS: Abiotic dechlorination is usually slower than microbial but abiotic dechlorination is usually complete. In favourable conditions, abiotic reactions bring significant contribution to natural attenuation processes. Abiotic agents that may enhance the reductive dechlorination of chlorinated ethanes and ethenes are zero-valent metals, sulphide minerals or green rusts. OXIDATION: At some sites, permanganate and Fenton's reagent can be used as remediation tool for oxidation of chlorinated ethanes and ethenes. SUMMARY: Nanoscale iron or bimetallic particles, due to high efficiency in degradation of chlorinated ethanes and ethenes, have gained much interest. They allow for rapid degradation of chlorinated ethanes and ethenes in water phase, but they also give benefit of treating dense non-aqueous phase liquid.     

Fate of PBDEs during food processing: Assessment of formation of mixed chlorinated/brominated diphenyl ethers and brominated dioxins/furans

The aim of this study was to evaluate effects of food processing on PBDE levels, in particular influence of heat treatment on degradation of PBDEs, including possible formation of chlorinated diphenyl ethers or brominated dioxins/furans as degradation products. It was shown that PBDEs heated in the presence of chlorine (from either organic or inorganic sources) formed mixed chlorinated/brominated diphenyl ethers. However, no PCDEs were formed in the presence of lipids. Lipid medium increased stability of PBDEs exposed to UV irradiation. Profile of congeners formed in result of the debromination reaction was significantly different than profiles observed by some other authors in aliphatic organic solvents. Grilling processes increased concentrations (calculated on the fresh product basis) of the studied compounds by 4–8/22–34% for electric/coal grill, respectively. Depending on the congener and on the applied heat treatment, PBDE mass in pork meat after grilling dropped by 26–53%. No detectable quantities of either brominated dioxins or furans were formed during thermal processing of food containing typical levels of PBDEs.     

A New Approach to Roof Monitor Particulate Sampling

A new method for sampling of emissions from building monitors using high volume samplers while continuously recording the exit gas velocity is presented. A technique is also outlined for automatic isokinetic sampling using a high volume sampler.     

An Investigation of Odors and Volatile Organic Compounds Released during Composting

ABSTRACT

The emissions of odors and volatile organic compounds produced from a commercial composting operation have been studied using a laboratory-scale composting system. The composting activity of a typical commercial compost feed was followed by monitoring the composting temperature, as well as the respiratory rate. Using a controlled aeration system, the gaseous volatiles produced were tested for odors using the "dilution-to-threshold" method, as well as gas composition, as determined by gas chromatography-mass spectrometry.

The results indicated that while there may be a reasonable correlation between the release of volatile organic compounds (VOCs) and odors, care has to be taken when trying to identify offensive odors with specific chemical species. However, the data obtained suggests that offensive odors formed during commercial composting may be due to sulfurous and nitrogenous compounds, although their concentrations in the compost gases may not be very high.

The major release of VOCs occurred during the first two weeks of composting, after which the gaseous releases fell dramatically as the composting process proceeded and temperatures started to fall.     

PCA and multidimensional visualization techniques united to aid in the bioindication of elements from transplanted <Emphasis Type="Italic">Sphagnum palustre</Emphasis> moss exposed in the Gdańsk City Area

GOAL, SCOPE AND BACKGROUND: During the last decades, a technique for assessing atmospheric deposition of heavy elements was developed based on the principle that samples of moss are able to accumulate elements and airborne particles from rain, melting snow and dry deposition. Despite a broad interest in bioindication there are still ongoing works aimed at the preparation of a standard procedure allowing for a comparison of research carried out in various areas. This is why the comparison of living and dry moss of the same species and growth site seems to be interesting, logical and promising. A most reliable approach seems to be the application of bioindication connected with multivariate statistics and efficient visualization techniques in the interpretation of monitoring data. The aim of this study was: (i) to present cumulative properties of transplanted Sphagnum palustre moss with differentiation into dry and living biomaterial; (ii) to determine and geographically locate types of pollution sources responsible for a structure of the monitoring data set; (iii) to visualize geographical distribution of analytes in the Gdańsk metropolitan area and to identify the high-risk areas which can be targeted for environmental hazards and public health. MATERIALS AND METHODS: A six month air pollution study based on Sphagnum palustre bioindication is presented and a simplified procedure of the experiment is given. The study area was located at the mouth of the Vistula River on the Baltic Sea, in Gdańsk City (Poland). Sphagnum palustre was selected for research because of its extraordinary morphological properties and its ease in being raised. The capability of dry and living moss to accumulate elements characteristic for anthropogenic and natural sources was shown by application of Principal Component Analysis. The high-risk areas and pollution profiles are detected and visualized using surface maps based on Kriging algorithm. RESULTS: The original selection of elements included all those that could be reliably determined by Neutron Activation Analysis in moss samples. Elimination of variables covered the elements whose concentrations in moss were lower than the reported detection limits for INAA for most observations or in cases where particular elements did not show any variation. Eighteen elements: a, Ca, Sc, Fe, Co, Zn, As, Br, Mo, Sb, Ba, La, Ce, Sm, Yb, Lu, Hf, Th, were selected for the research presented. DISCUSSION: Two runs of PCA were performed since, in the first-run a heavy polluted location (Stogi - 'Sto') understood as outlier in the term of PCA approach was detected and results in the form of block diagrams and surface maps were presented. As ensues from the first-run PCA analysis, the factor layout for both indicators is similar but not identical due to the differences in the elements accumulation mechanism. Three latent factors ('phosphatic fertilizer plant impact', 'urban impact' and 'marine impact') explain over 89% and 82% of the total variance for dry and living moss respectively. In the second-run PCA three latent factors are responsible for the data structure in both moss materials. However, in the case of dry moss analysis these factors explain 85% of the total variance but they are rather hard to interpret. On the other hand living moss shows the same pattern as in first-run PCA. Three latent factors explain over 84% of the total variance in this case. The pollution profiles extracted in PCA of dry moss data differ tremendously between both runs, while no deterioration was found after removal of Stogi from data set in case of living moss. Performance of the second-run PCA with exception of Stogi as a heavy polluted location has led to the conclusion that living moss shows better indication properties than dry one. CONCLUSIONS: While using moss as wet and dry deposition sampier it is not possible to calculate deposition values since the real volume of collected water and dust is hard to estimate due to a splash effect and irregular surface. Therefore, accumulation values seam to be reasonable for moss-based air pollution surveys. Both biomaterials: dry and living Sphagnum palustre show cumulative properties relative to elements under interest. Dry moss has a very loose collection of the atmospheric particles, which can also easily get lost upon rinsing with rainwater running through exposed dry moss material. The living moss may, on the contrary, incorporate the elements in its tissue, thus being less susceptible to rinsing and thus better reflecting the atmospheric conditions. Despite the differences in element uptake and uphold capabilities dry and living moss reflect characteristic anthropogenic and natural profiles. Visible differences in impacts' map coverage exist mostly due to the accumulation mechanisms differentiating dry from living moss. However, in case of each indicator 'phosphatic fertilizer plant impact' is recognized as the strongest pollution source present in examined region. RECOMMENDATIONS AND PERSPECTIVES: General types of pollution sources responsible for a structure of monitoring data set were determined as high-risk/low-risk areas and visualized in form of geographic distribution maps. These locations can be targeted for environmental hazards and public health. Chemometric results in the form of easy defined surface maps can became a powerful instrument in hands of decision-makers working in the field of sustainable development implementation.