Blockchain technology-based sustainable management research: the status quo and a general framework for future application

Environmental Science and Pollution Research - The problems of data leakage and unreliable information transfer in the management process make sustainability management an inevitable need for...     

Energy intensity and its determinants in China: an empirical study based on ARDL-VECM approach

The present study aims to better understand the relationship between energy intensity and its determinants including energy price, technological progress, economic structure, and energy mix using the autoregressive distributed lag(ARDL) bounds approach and vector error correction model technique. Based on China's time series over 1985-2014, the ARDL bounds approach yields empirical evidence that confirms the existence of long run relationship between energy price, technological progress, economic structure, energy mix, and energy intensity. The results show that technological progress is an important driver for the declining energy intensity in short and long run. Energy price has not been demonstrated as an important role in decreasing energy intensity in the short run. The high share of coal use in total energy use may be responsible for China's high energy intensity.However, the relative change in economic sectors plays a minor role in energy intensity reduction during the past years. In the long run, technological progress, energy mix and energy prices Granger cause energy intensity, but not vice versa except for the energy mix.     

Structural and electrochemical properties of annealed La1-xYxNi3.55Mno.4Alo.3Coo.75 hydrogen storage alloys

The effects of the annealing and partial substitution of Y for La on the structural and electrochemical properties of La_1-xY_xNi_3.55Mn_o.4Al_o.3Cr_o.75 (x = 0, 0.1 and 0.2) alloys were reported in the present work. The single-phased CaCu₅-type structure was retained after La was partially substituted by Y. However, the increase of Y content leads to decrease of the lattice parameters and the unit-cell volume. The annealed La_o.9Y_o.1Ni_3.55Mn_o.4Al_o.3Co_o.75 alloys shows typical isometric microstructure, indicating that the composition segregation is improved by annealing. Y substitution for La in the alloys is effective to improve the electrochemical properties at both room temperature and high temperature. A critical substitution content of Y is found at x = 0.1.     

建设新时代美丽城市的总体思路与战略任务研究

建设美丽中国是党的二十大提出的社会主义现代化强国的重要目标之一。城市是实施新型城镇化、推动绿色发展、建设美丽中国的重要载体,是美丽中国最具代表性的表现形式与具体呈现。面对党的二十大和全国生态环境保护大会整体部署及美丽城市建设现实需求,本文明确建设新时代美丽城市的工作背景及重大意义,评估我国美丽城市建设的进展、成效,分析识别当前新时代美丽城市建设面临的主要问题及挑战,从重点任务、工作机制、政策支撑、带动示范等层面提出开展新时代美丽城市建设的思路与任务建议,为推动建设新时代美丽城市提供支撑。     

A fouling suppression system in submerged membrane bioreactors using dielectrophoretic forces

A novel method was developed to suppress membrane fouling in submerged membrane bioreactors. The method is based on the dielectrophoretic (DEP) motion of particles in an inhomogeneous electrical field. Using a real sample of biomass as feed, the fouling-suppression performance using DEP with different electrical field intensities (60–160 V) and different frequencies (50–1000 Hz) was investigated. The fouling-suppression performance was found to relate closely with the intensity and frequency of the electrical field. A stronger electrical field was found to better recover the filtrate flux. This is because of a stronger DEP force acting on the biomass particles close to the membrane's surface. Above an intensity and frequency value of 130 V and 1 kHz, respectively the permeate flux was reduced due to an electrothermal effect.     

高压喷射技术加固地基的工程实践

概述了在辽宁大洼县田庄台抽水站地基处理工程中采用高压喷射注浆技术的实践经验，并介绍了从工程勘察、方案选择、设计、施工和检测的全过程。此项技术，经过长期沉降观测取得了良好的加固成果。     

Characterization and Release Kinetics of Allylthiosufinate and its Transforments from Poly(d,l-Lactide) Microspheres

In this work was described poly(d,l-lactide) microwave synthesis using tin(II) 2-ethylhexanoate initiated ring-opening polymerization. Polymerization was performed at 100 °C with monomer to initiator molar ratio ([M]/[I]) of 5,000 in 30 min. The achieved number average molar mass of obtained polymers (determined by gel permeation chromatography) was 102,320 g/mol, with the polydispersion index, Q, 2.80. Structural characterization was performed by FT-IR spectroscopy followed characteristic bands. For applicative purposes the obtained polymer was purified during the procedure of microsphere preparation. Biodegradable microspheres prepared from poly(d,l-lactide) have been widely studied in recent years and have become well established controlled drug delivery systems. In this work microspheres were loaded with allyl thiosulfinate (allicin) and its transforments products (ajoene and vinyldithiine), as pharmacological active substances. The morphology of the microspheres was analyzed using a scanning electron microscope. Allicin was synthesized by acid oxidation of allyl disufide and purification of obtained products by liquid–liquid extraction with diethyl ether. Obtained allicin, purity 73%, was transformed using microwave in acetone solution, at solvent boiling temperature, for 5 min. For the quality and quantity analysis of allicin and its transformation process was used LC/MS chromatography. (E)- and (Z)-ajoene were detected at retention time 3.1 and 3.3 min, respectively, whence 3-vynil-4H-1,2-dithiine and 2-vynil-4H-1,3-dithiine were detected at 4.3 and 4.8 min, respectively. Retention time of allicin was 2.93 min, according to liquid chromatography results. HPLC method was used for assessment of pharmaceutical substances (alicine and alicine transforments) releasing from microspheres at room temperature in solutions with different pH (pH = 3 and pH = 8) for 24 h.     

甘氨酸母液脱色废活性炭的微波-Fenton试剂氧化法再生

采用微波-Fenton试剂氧化法对甘氨酸母液脱色过程中产生的废活性炭进行再生,考察了废活性炭再生率的影响因素,并用SEM对再生活性炭进行了表征.实验结果表明,在Fenton试剂中n(H2O2)∶n(Fe2+)为24∶1、H2O2的浓度为25 mmol/L、溶液pH为3、反应温度为55℃、反应时间为18 min、微波功率为600 W时,废活性炭的再生率可达到75.80％.     

Poly(Ethylene Glycol) Grafted Starch Introducing a Novel Interphase in Poly(Lactic Acid)/Poly(Ethylene Glycol)/Starch Ternary Composites

The main purpose of this study is challenging to dramatically improve the toughness of poly(lactic acid) (PLA)/starch by adding poly (ethylene glycol) (PEG) into the composites and grafting PEG molecules onto the surface of starch particles. It was found that the surface grafting of PEG onto starch induced the presence of PEG-rich regions located around the starch particles, caused by migration and aggregation of free PEG molecules. A novel interphase transition layer between PLA and starch was formed, which showed great ability for cavitation and vested large-scaled plastic deformation to PLA matrix. Further mechanical properties tests indicated the formation of interphase layer significantly increase the elongation at break from 10.2 to 254.5%, and notched impact strength from 1.56 to 2.37?kJ/m² for PLA/PEG/starch ternary composites. The influence of PEG component, ethanol extraction and annealing was also investigated.     

酸洗废液制备高纯氧化铁红

以钢板酸洗废液为原料,采用铁粉预处理、除杂、合成、水洗、干燥、煅烧等工序制备高纯氧化铁红.最佳工艺条件为:预处理温度80℃,预处理时间3h,铁粉加入量为理论值的1.5倍;除杂温度65 ℃,聚丙烯酰胺加入量60 mg/L;米用将FeC12溶液和饱和NH4HCO3溶液同时滴加入反应器的方式进行沉淀反应;煅烧温度800℃.在此工艺条件下处理酸洗废液,可制得纯度为99.3％的高纯氧化铁红.