Identification of Mn-oxide minerals in some soils from Devon,UK, and their varying capacity to adsorb Co and Cu

A number of Mn-oxide minerals in soils from a farm in North Devon have been tentatively identified using a combination of advanced analytical techniques: scanning electron microscopy (SEM), scanning electron microprobe (SEMP), X-ray diffraction (XRD) and bulk chemical analysis by wet digestion followed by inductively-coupled plasma spectrometry (ICP). The minerals lithiophorite and hollandite are thought to occur throughout the study area although there is considerable geographical variation in the proportions of minerals present. Bimessite, vernadite, romanechite, todorokite and cryptomelane may also be present, although in smaller amounts. The use of SEMP, together with a simple sorption experiment, has allowed a study of the extent of uptake of Co and Cu by different Mn-oxide minerals. Lithiophorite appears to take up Co and Cu more effectively than hollandite within a pH range of 4–6.     

Comparative Analysis of Ecophysiological Characteristics of Stephanodiscus hantzschii Grun. in the Periods of Its Bloom in Recreational Water Bodies

In the periods of summer and autumn bloom of the Stephanodiscus hantzschii Crun. in recreational water bodies, studies on the vertical distribution of chlorophyll a, its contents per unit biomass, efficiency in using photosynthetically active radiation (E_PhAR), and assimilative activity of microalgae were performed. The results confirmed the existence of two ecophysiological forms of St. hantzschii and provided evidence that both forms are typically autotrophic and can efficiently use low-intensity PhAR for photosynthesis.     

In situ assessment of modification of sediment properties by burrowing invertebrates

Benthic organisms can significantly alter the physical properties of marine sediments, but it has hitherto been difficult to assess and quantify the effects of bioturbation. In situ geophysical techniques offer new methods for measuring these effects: measurement of acoustic shear-wave velocity and electrical resistivity allows nondestructive assessment of the properties of the grain framework and pore-fluid matrix, respectively, of the seabed sediment. The influence of burrowing invertebrates on the structural properties of sandy sediments at intertidal locations on the coast of Wales (UK) was investigated during the periol 1986–1987 using these techniques. Three species (Arenicola marina, Corophium arenarium and Lanice conchilega) were selected on the basis of their contrasting styles of burrow construction. All three species produced measurable and significant, although different, changes in bed properties. They modified shear-wave propagation through the bed by changing bed rigidity: while A. marina and C. arenarium decreased rigidity by creating open burrows, L. conchilega increased rigidity by building shell-lined tubes. All produced a decrease in electrical resistivity by altering porosity and/or tortuosity, which implies an increase in permeability; these changes were attributable not only to the presence of the burrows but also to modification of the between-burrow sediment texture and bed properties.     

Active capping demonstration in the Anacostia river,Washington, D.C.

An active capping demonstration project in Washington, D.C., is testing the ability to place sequestering agents on contaminated sediments using conventional equipment and evaluating their subsequent effectiveness relative to conventional passive sand sediment caps. Selected active capping materials include: (1) AquaBlokTM, a clay material for permeability control; (2) apatite, a phosphate mineral for metals control; (3) coke, an organic sequestration agent; and (4) sand material for a control cap. All of the materials, except coke, were placed in 8,000‐ft test plots by a conventional clamshell method during March and April 2004. Coke was placed as a 1.25‐cm layer in a laminated mat due to concerns related to settling of the material. Postcap sampling and analysis were conducted during the first, sixth, and eighteenth months after placement. Although postcap sampling is expected to continue for at least an additional 24 months, this article summarizes the results of the demonstration project and postcap sampling efforts up to 18 months. Conventional clamshell placement was found to be effective for placing relatively thin (six‐inch) layers of active material. The viability of placing high‐value or difficult‐to‐place material in a controlled manner was successfully demonstrated with the laminated mat. Postcap monitoring indicates that all cap materials effectively isolated contaminants, but it is not yet possible to differentiate between conventional sand and active cap layer performance. Monitoring of the permeability control layer indicated effective reductions in groundwater seepage rates through the cap, but also showed the potential for gas accumulation and irregular release. All of the cap materials show deposition of new contaminated sediment onto the surface of the caps, illustrating the importance of source control in maintaining sediment quality. © 2006 Wiley Periodicals, Inc.     

Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

Biological productivity of bogs in the middle taiga subzone of Western Siberia

New experimental data on biological productivity of plant communities in oligotrophic and mesotrophic bogs of the middle taiga subzone over the past five years are presented. The relationship between net primary production and the stock of live phytomass is estimated. The stock of necromass in oligotrophic bog ecosystems increases from west to east, while the stock of live phytomass and net primary production decrease.     

Prenatal prediction of childhood-onset spinal muscular atrophy (SMA) in Turkish families

Childhood-onset spinal muscular atrophy (SMA) is one of the most common neurodegenerative genetic disorders. SMN1 is the SMA-determining gene deleted or mutated in the majority of SMA cases. There is no effective cure or treatment for this disease yet. Thus, the availability of prenatal testing is important. Here we report prenatal prediction for 68 fetuses in 63 Turkish SMA families using direct deletion analysis of the SMN1 gene by restriction digestion. The genotype of the index case was known in 40 families (Group A) but unknown in the remaining 23 families (Group B). A total of ten fetuses were predicted to be affected. Eight of these fetuses were derived from Group A and two of these fetuses were from Group B families. Two fetuses from the same family in Group A had the SMNhyb1 gene in addition to homozygous deletion of the NAIP gene. One fetus from Group A was homozygously deleted for only exon 8 of the SMN2 gene, and further analysis showed the presence of both the SMN1 and SMNhyb1 genes but not the SMN2 gene. In addition, one carrier with a homozygous deletion of only exon 8 of the SMN1 gene was detected to have a SMNhyb2 gene, which was also found in the fetus. To our knowledge, these are the first prenatal cases with SMNhyb genes. Follow-up studies demonstrated that the prenatal predictions and the phenotype of the fetuses correlated well in 33 type I pregnancies demonstrating that a careful molecular analysis of the SMN genes is very useful in predicting the phenotype of the fetus in families at risk for SMA. Copyright © 2002 John Wiley & Sons, Ltd.     

Isotope tracing of submarine groundwater discharge offshore Ubatuba, Brazil: results of the IAEA–UNESCO SGD project

Results of groundwater and seawater analyses for radioactive (³H, ²²²Rn, ²²³Ra, ²²⁴Ra, ²²⁶Ra, and ²²⁸Ra) and stable (D and ¹⁸O) isotopes are presented together with in situ spatial mapping and time series ²²²Rn measurements in seawater, direct seepage measurements using manual and automated seepage meters, pore water investigations using different tracers and piezometric techniques, and geoelectric surveys probing the coast. This study represents first time that such a new complex arsenal of radioactive and non-radioactive tracer techniques and geophysical methods have been used for simultaneous submarine groundwater discharge (SGD) investigations. Large fluctuations of SGD fluxes were observed at sites situated only a few meters apart (from 0 cm d⁻¹ to 360 cm d⁻¹; the unit represents cm³/cm²/day), as well as during a few hours (from 0 cm d⁻¹ to 110 cm d⁻¹), strongly depending on the tidal fluctuations. The average SGD flux estimated from continuous ²²²Rn measurements is 17 ± 10 cm d⁻¹. Integrated coastal SGD flux estimated for the Ubatuba coast using radium isotopes is about 7 × 10³ m³ d⁻¹ per km of the coast. The isotopic composition (δD and δ¹⁸O) of submarine waters was characterised by significant variability and heavy isotope enrichment, indicating that the contribution of groundwater in submarine waters varied from a small percentage to 20%. However, this contribution with increasing offshore distance became negligible. Automated seepage meters and time series measurements of ²²²Rn activity concentration showed a negative correlation between the SGD rates and tidal stage. This is likely caused by sea level changes as tidal effects induce variations of hydraulic gradients. The geoelectric probing and piezometric measurements contributed to better understanding of the spatial distribution of different water masses present along the coast. The radium isotope data showed scattered distributions with offshore distance, which imply that seawater in a complex coast with many small bays and islands was influenced by local currents and groundwater/seawater mixing. This has also been confirmed by a relatively short residence time of 1–2 weeks for water within 25 km offshore, as obtained by short-lived radium isotopes. The irregular distribution of SGD seen at Ubatuba is a characteristic of fractured rock aquifers, fed by coastal groundwater and recirculated seawater with small admixtures of groundwater, which is of potential environmental concern and has implications on the management of freshwater resources in the region.