Receptor model-based source apportionment of particulate pollution in Hyderabad, India

Air quality in Hyderabad, India, often exceeds the national ambient air quality standards, especially for particulate matter (PM), which, in 2010, averaged 82.2?±?24.6, 96.2?±?12.1, and 64.3?±?21.2 μg/m³ of PM₁₀, at commercial, industrial, and residential monitoring stations, respectively, exceeding the national ambient standard of 60 μg/m³. In 2005, following an ordinance passed by the Supreme Court of India, a source apportionment study was conducted to quantify source contributions to PM pollution in Hyderabad, using the chemical mass balance (version 8.2) receptor model for 180 ambient samples collected at three stations for PM₁₀ and PM_2.5 size fractions for three seasons. The receptor modeling results indicated that the PM₁₀ pollution is dominated by the direct vehicular exhaust and road dust (more than 60 %). PM_2.5 with higher propensity to enter the human respiratory tracks, has mixed sources of vehicle exhaust, industrial coal combustion, garbage burning, and secondary PM. In order to improve the air quality in the city, these findings demonstrate the need to control emissions from all known sources and particularly focus on the low-hanging fruits like road dust and waste burning, while the technological and institutional advancements in the transport and industrial sectors are bound to enhance efficiencies. Andhra Pradesh Pollution Control Board utilized these results to prepare an air pollution control action plan for the city.     

Effect of development on water quality for seven streams in North Carolina

In this study, baseflow and storm discharges were monitored in seven watersheds of varying development density to document the effects of development on stream water quality. In addition, two of the watersheds contained package wastewater treatment facilities, which were evaluated as an alternative to residential on-site septic systems. Monthly grab samples of baseflow and flow-proportional samples of storm event discharge were collected and analyzed for nitrogen, phosphorus, sediment, and bacteria. For the five watersheds without wastewater treatment facilities, a significant linear relationship was documented between fecal coliform and enterococci levels in baseflow samples and the percentage of residential or impervious area. For the two watersheds with wastewater discharge, bacteria levels were significantly greater than those from the two relatively undeveloped watersheds. These results indicate that bacteria levels increased with increasing residential development even if many of the septic systems were replaced by a community wastewater treatment system. Computed annual export rates for ammonia nitrogen (NH₃-N) were correlated to the percentage of impervious surfaces in the watersheds, while the rates for other nitrogen forms, total phosphorus, and total suspended sediment were not. Annual export rates from the two mostly undeveloped watersheds were greater than a compilation of rates for undeveloped areas across the USA. Export from the four watersheds with more than 68 % residential land use was less than those reported from local and national studies of residential areas.     

Concentration of trace metals in sediments and soils from protected lands in south Florida: background levels and risk evaluation

A comprehensive environmental evaluation was completed on 20 metals: two reference metals (Fe, Al) and several minor trace metals (As, Ba, Co, Cr, Cu, Mn, Ni, Pb, V, and Zn) for surface soils and sediments collected from 50 sites in Everglades National Park (ENP), the coastal fringes of Biscayne National Park (BNP), and Big Cypress National Preserve. Samples were prepared by acid digestion (EPA3050) and analyzed by ICP/MS detection (EPA6020). Although no widespread contamination was detected across the two parks and one preserve, there were some specific areas where metal concentrations exceeded Florida’s ecological thresholds, suggesting that some metals were of concern. A screening-level evaluation based on a proposed effect index grouped trace metals by their potential for causing negligible, possible, and probable effects on the biota. For example, Cu in BNP and Cr and Pb in ENP were considered of concern because their adverse effect likelihood to biota was assessed as probable; consequently, these trace metals were selected for further risk characterization. Also, stations were ranked based on a proposed overall contamination index that showed that: site BB10 in BNP and sites E3 and E5 in ENP had the highest scores. The first site was located in a marina in BNP, and the other two sites were along the eastern boundary of ENP adjacent to current or former agricultural lands. An assessment tool for south Florida protected lands was developed for evaluating impacts from on-going Everglades restoration projects and to assist State and Federal agencies with resource management. The tool consists of enrichment plots and statistically derived background concentrations based on soil/sediment data collected from the two national parks and one preserve. Finally, an equally accurate but much simplified approach is offered for developing enrichment plots for other environmental settings.     

Determination of gaseous polycyclic aromatic hydrocarbons by a simple direct method using thermal desorption–gas chromatography–mass spectrometry

In the last decade, the development of novel analytical methodologies enabled the identification of several environmental pollutants responsible for health problems associated with indoor exposure. Polycyclic aromatic hydrocarbons (PAHs) are among the potential hazardous chemicals present in ambient air. Due to their bioaccumulation potential and carcinogenic/mutagenic effects, 16 PAHs are currently listed as priority air pollutants. The main goal of this work was to implement a new and simple method for sampling and determination of PAHs in air by using a thermal desorption (TD) technique followed by gas chromatography coupled with mass spectrometry analysis. A detailed study was carried out to optimise the experimental method in each of its phases, including (active) sampling, TD and chromatographic analysis. The results demonstrate that this approach allowed the detection and quantification of the six more volatile PAHs, namely, naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, and anthracene. Acceptable precision and good linearity over the explored range were obtained. No carry-over was observed during experimental tests and the method provided a reproducible answer. The applicability of the novel methodology was tested in real environment, namely, on the roof of a building in an urban area, in a domestic kitchen and in a collective car garage. The method enabled the identification of two PAHs in the field samples, specifically, naphthalene (two rings) and phenanthrene (three rings). With regard to PAHs sample composition, the most abundant PAH found, in the three different locations, was naphthalene, accounting for about 84–100 % of the total PAH mass detected.     

Automated riverine landscape characterization: GIS-based tools for watershed-scale research, assessment, and management

River systems consist of hydrogeomorphic patches (HPs) that emerge at multiple spatiotemporal scales. Functional process zones (FPZs) are HPs that exist at the river valley scale and are important strata for framing whole-watershed research questions and management plans. Hierarchical classification procedures aid in HP identification by grouping sections of river based on their hydrogeomorphic character; however, collecting data required for such procedures with field-based methods is often impractical. We developed a set of GIS-based tools that facilitate rapid, low cost riverine landscape characterization and FPZ classification. Our tools, termed RESonate, consist of a custom toolbox designed for ESRI ArcGIS®. RESonate automatically extracts 13 hydrogeomorphic variables from readily available geospatial datasets and datasets derived from modeling procedures. An advanced 2D flood model, FLDPLN, designed for MATLAB® is used to determine valley morphology by systematically flooding river networks. When used in conjunction with other modeling procedures, RESonate and FLDPLN can assess the character of large river networks quickly and at very low costs. Here we describe tool and model functions in addition to their benefits, limitations, and applications.     

Distribution of radionuclides in surface soils, Singhbhum Shear Zone, India and associated dose

Gamma emitters were estimated in surface soils from a mineralized zone in Eastern India using high purity Germanium detector-based high resolution gamma spectrometry system. Activities of ²³⁸U, ²²⁶Ra, ²³²Th, ²³⁵U, ²²⁷Th, ^234mPa, ²¹⁰Pb, ⁴⁰K, and ¹³⁷Cs were 79?±?50, 81?±?53, 65?±?23, 4?±?2, 5?±?4, 92?±?50, 97?±?45, 517?±?201, and 4?±?2 Bq/kg, respectively. Most radionuclides were observed to follow log-normal distribution. The correlation between physicochemical properties of the samples, like pH, organic matter content, particle size, and moisture content were also studied. Activity ratios of ²²⁶Ra/²³⁸U, ²¹⁰Pb/²²⁶Ra, and ²²⁷Th/²³⁵U indicated deviation from secular equilibrium in some samples. The associated annual effective dose ranged from 0.07 to 0.24 mSv and the mean was calculated to be 0.12?±?0.04 mSv for this region, indicating it to be one of normal natural background radiation.     

Status and effect of pesticide residues in soils under different land uses of Andaman Islands, India

Pesticides are shown to have a great effect on soil organisms, but the effect varies with pesticide group and concentration, and is modified by soil organic carbon content and soil texture. In the humid tropical islands of Andaman, India, no systematic study was carried out on pesticide residues in soils of different land uses. The present study used the modified QuEChERS method for multiresidue extraction from soils and detection with a gas chromatograph. DDT and its various metabolites, α-endosulfan, β-endosulfan, endosulfan sulfate, aldrin, and fenvalerate, were detected from the study area. Among the different pesticide groups detected, endosulfan and DDT accounted for 41.7 % each followed by aldrin (16.7 %) and synthetic pyrethroid (8.3 %). A significantly higher concentration of pesticide residues was detected in rice–vegetable grown in the valley followed by rice–fallow and vegetable–fallow in the coastal plains. Soil microbial biomass carbon is negatively correlated with the total pesticide residues in soils, and it varied from 181.2 to 350.6 mg?kg^?1. Pesticide residues have adversely affected the soil microbial populations, more significantly the bacterial population. The Azotobacter population has decreased to the extent of 51.8 % while actinomycetes were the least affected though accounted for 32 % when compared to the soils with no residue.     

Particulate matter concentration in ambient air and its effects on lung functions among residents in the National Capital Region, India

The World Health Organization has estimated that air pollution is responsible for 1.4 % of all deaths and 0.8 % of disability-adjusted life years. NOIDA, located at the National Capital Region, India, was declared as one of the critically air-polluted areas by the Central Pollution Control Board of the Government of India. Studies on the relationship of reduction in lung functions of residents living in areas with higher concentrations of particulate matter (PM) in ambient air were inconclusive since the subjects of most of the studies are hospital admission cases. Very few studies, including one from India, have shown the relationship of PM concentration and its effects of lung functions in the same location. Hence, a cross-sectional study was undertaken to study the effect of particulate matter concentration in ambient air on the lung functions of residents living in a critically air-polluted area in India. PM concentrations in ambient air (PM_1, PM_2.5) were monitored at residential locations and identified locations with higher (NOIDA) and lower concentrations (Gurgaon). Lung function tests (FEV₁, PEFR) were conducted using a spirometer in 757 residents. Both air monitoring and lung function tests were conducted on the same day. Significant negative linear relationship exists between higher concentrations of PM₁ with reduced FEV₁ and increased concentrations of PM_2.5 with reduced PEFR and FEV₁. The study shows that reductions in lung functions (PEFR and FEV₁) can be attributed to higher particulate matter concentrations in ambient air. Decline in airflow obstruction in subjects exposed to high PM concentrations can be attributed to the fibrogenic response and associated airway wall remodeling. The study suggests the intervention of policy makers and stake holders to take necessary steps to reduce the emissions of PM concentrations, especially PM_1, PM_2.5, which can lead to serious respiratory health concerns in residents.     

The effect of changes in land use on nitrate concentration in water supply wells in southern Chester County, Pennsylvania

An analysis of private potable water well data was conducted for seven single family residential developments in southern Chester County, Pennsylvania. Background data were available for 165 wells within the communities when the wells were first drilled in the 1980s and early 1990s. Sampling of 75 wells within these same communities was performed in 2006 to determine whether conversion of the land to residential housing along with the use of conventional on-lot septic systems had resulted in elevated concentration of nitrate-nitrogen in the drinking water aquifer. The data indicate that prior land use influenced the occurrence of nitrate-nitrogen in the drinking water aquifer. The median nitrate-nitrogen concentration for the 165 wells in the background dataset was 2.9 mg/L. One hundred-seven of those wells were drilled on land previously used for active agricultural purposes. The median nitrate concentration in these wells was 3.8 mg/L. Of 48 wells drilled on forested land, the median nitrate concentration was 1.1 mg/L, approximately 3.5 times lower than those drilled on active agricultural land. The median nitrate concentration in the 2006 sampling dataset was 3.6 mg/L, an increase of 0.7 mg/L. The data indicate that conversion of the land has not resulted in contamination of the drinking water aquifer with respect to nitrate-nitrogen. Likewise, the data suggest that the conversion has not resulted in significant improvements to overall water quality.     

Surface geophysical exploration: developing noninvasive tools to monitor past leaks around Hanford’s tank farms

A characterization program has been developed at Hanford to image past leaks in and around the underground storage tank facilities. The program is based on electrical resistivity, a geophysical technique that maps the distribution of electrical properties of the subsurface. The method was shown to be immediately successful in open areas devoid of underground metallic infrastructure, due to the large contrast in material properties between the highly saline waste and the dry sandy host environment. The results in these areas, confirmed by a limited number of boreholes, demonstrate a tendency for the lateral extent of the underground waste plume to remain within the approximate footprint of the disposal facility. In infrastructure-rich areas, such as tank farms, the conventional application of electrical resistivity using small point-source surface electrodes initially presented a challenge for the resistivity method. The method was then adapted to directly use the buried infrastructure, specifically the steel-cased wells that surround the tanks, as “long” electrodes for both transmission of electrical current and measurements of voltage. Overcoming the drawbacks of the long electrode method has been the focus of our work over the past 7 years. The drawbacks include low vertical resolution and limited lateral coverage. The lateral coverage issue has been improved by supplementing the long electrodes with surface electrodes in areas devoid of infrastructure. The vertical resolution has been increased by developing borehole electrode arrays that can fit within the small-diameter drive casing of a direct push rig. The evolution of the program has led to some exceptional advances in the application of geophysical methods, including logistical deployment of the technology in hazardous areas, development of parallel processing resistivity inversion algorithms, and adapting the processing tools to accommodate electrodes of all shapes and locations. The program is accompanied by a full set of quality assurance procedures that cover the layout of sensors, measurement strategies, and software enhancements while insuring the integrity of stored data. The data have been shown to be useful in identifying previously unknown contaminant sources and defining the footprint of precipitation recharge barriers to retard the movement of existing contamination.