Encapsulation of lead from hazardous CRT glass wastes using biopolymer cross-linked concrete systems

Discarded computer monitors and television sets are identified as hazardous materials due to the high content of lead in their cathode ray tubes (CRTs). Over 98% of lead is found in CRT glass. More than 75% of obsolete electronics including TV and CRT monitors are in storage because appropriate e-waste management and remediation technologies are insufficient. Already an e-waste tsunami is starting to roll across the US and the whole world. Thus, a new technology was developed as an alternative to current disposal methods; this method uses a concrete composite crosslinked with minute amounts of biopolymers and a crosslinking agent. Commercially available microbial biopolymers of xanthan gum and guar gum were used to encapsulate CRT wastes, reducing Pb leachability as measured by standard USEPA methods. In this investigation, the synergistic effect of the crosslinking reaction was observed through blending two different biopolymers or adding a crosslinking agent in biopolymer solution. This CRT-biopolymer-concrete (CBC) composite showed higher compressive strength than the standard concrete and a considerable decrease in lead leachability.     

Using fisher-contributed secondary fins to fill critical shark-fisheries data gaps

Developing-world shark fisheries are typically not assessed or actively managed for sustainability; one fundamental obstacle is the lack of species and size-composition catch data. We tested and implemented a new and potentially widely applicable approach for collecting these data: mandatory submission of low-value secondary fins (anal fins) from landed sharks by fishers and use of the fins to reconstruct catch species and size. Visual and low-cost genetic identification were used to determine species composition, and linear regression was applied to total length and anal fin base length for catch-size reconstruction. We tested the feasibility of this approach in Belize, first in a local proof-of-concept study and then scaling it up to the national level for the 2017–2018 shark-fishing season (1,786 fins analyzed). Sixteen species occurred in this fishery. The most common were the Caribbean reef (Carcharhinus perezi), blacktip (C. limbatus), sharpnose (Atlantic [Rhizoprionodon terraenovae] and Caribbean [R. porosus] considered as a group), and bonnethead (Sphyrna cf. tiburo). Sharpnose and bonnethead sharks were landed primarily above size at maturity, whereas Caribbean reef and blacktip sharks were primarily landed below size at maturity. Our approach proved effective in obtaining critical data for managing the shark fishery, and we suggest the tools developed as part of this program could be exported to other nations in this region and applied almost immediately if there were means to communicate with fishers and incentivize them to provide anal fins. Outside the tropical Western Atlantic, we recommend further investigation of the feasibility of sampling of secondary fins, including considerations of time, effort, and cost of species identification from these fins, what secondary fin type to use, and the means with which to communicate with fishers and incentivize participation. This program could be a model for collecting urgently needed data for developing-world shark fisheries globally. Article impact statement: Shark fins collected from fishers yield data critical to shark fisheries management in developing nations.     

Release,distribution, and impacts of polychlorinated biphenyls (PCB) induced by dredged material disposal activities at a deep-water estuarine site

The aquatic disposal field investigation initiated in Elliott Bay, Puget Sound, WA, in February 1976, was designed to evaluate the ecological effects of open-water disposal of dredged material. The experimental disposal site was located at a depth of 60 m in marine estuary with generally weak circulation. Approximately 114,000 m³ of dredged material contaminated with polychlorinated biphenyls (PCBs) were dumped at the site from split-hull barges. The material presented in this paper is limited to a discussion of PCB impacts. It imcludes (a) a summary of results from the studies conducted between 1976 and 1977 to assess short-term impacts during and after the disposal of PCB contaminated sediments at the Elliott Bay disposal site; (b) a presentation of preliminary results from the continuation studies initiated in February 1979 to determine long-term impacts of the disposal operations. The preliminary data indicate that both dredged-material deposit and the associated PCBs appear to be stable. No major long-term impact on benthic organisms is apparent from this analysis.     

Vulnerability interventions in the context of multiple stressors: lessons from the Southern Africa Vulnerability Initiative (SAVI)

This paper describes an initiative to develop a model for understanding the multi-faceted nature and effects of vulnerability. The model is designed to enable analysis and assessment of interventions that address vulnerability, a concept that is widely used across disciplines and in development planning in Africa, particularly in southern Africa. The model is being developed to accommodate analyses of ‘multiple stressors’ and to identify the intersection and interaction of stressors in different contexts. Using three case studies related to vulnerability reduction and HIV/AIDS, we show how multiple processes interact and can influence the outcomes of vulnerability interventions in ways that may not be readily apparent when focusing on one stressor alone.