Chain-Length Shortening of Methyl Ethyl Hydroxyethyl Cellulose: An Evaluation of the Material Properties and Effect on Foaming Ability

During the past century, plastics have become a natural element in our every-day life. Lately however, an awareness about the fossil origin and often non-degradable nature of many plastics is rising. This has resulted in the emergence of some bio-based and/or biodegradable plastics, often produced from renewable resources. One possible candidate for bioplastics production could be found in cellulose. This paper aims at contributing information regarding a cellulose derivative, which could possibly be used in foamed plastics applications. Therefore, the reduction of the chain-length of a methyl ethyl hydroxyethyl cellulose (MEHEC), assessed by size exclusion chromatography, and the effect of chain-length on the foaming behaviour were studied. The foaming was accomplished with a hot-mould technique using aqueous polymer solutions. The generated steam was here used as the blowing agent and important parameters were polymer concentration and solution viscosity. The density of the produced foams was assessed and was in some cases comparable to that of commodity foams. It was found that reducing the chain-length enabled an increase of the initial polymer concentration for the foaming process. This is believed to be beneficial for creating more structurally stable foams of this type.     

A standardized method for assessment of oxidative transformations of brominated phenols in water

The term persistence has been used to confusion since it is used as a conceptual parameter without a uniform definition. Work is therefore being done in order to unite ideas and describe persistence based on the chemical reactivity and chemico-physical properties of compounds via investigation of the main degradation pathways in the environment; photolysis, hydrolysis-substitution-elimination (hse), oxidation, reduction and radical reactions. The present work is focused on developing a method to determine oxidative degradation rates of chemicals and thereby measurement of their susceptibility to undergo oxidation reactions. The method based on potassium permanganate works well for water soluble compounds and is easy, robust, inexpensive and reproducible. By using the method and varying the analysed substances, the degradation rates for brominated phenols, two chlorinated phenols and high volume production compounds such as tetrabromobisphenol A (TBBPA), tetrachlorobisphenol A (TCBPA) and bisphenol A (BPA) have been determined at pH 7.6+/-0.2. The reaction rates of the two halogenated BPA's are particularly fast, giving half-lives in seconds. The other test compounds have slower reaction rates but easily measured under the reaction conditions applied. The reactions are temperature dependent. There is evidence that pK(a) and the substitution pattern of the halogens affects the rate of the reactions. The method is robust and applicable for reaction rate constant measurements of present and potential future environmental contaminants.     

Exposure to anti-cancer drugs during preparation and administration. Investigations of an open and a closed system

Systems for the preparation and administration of drugs are designed to ensure that the drug is not contaminated. They do not necessarily consider the work environment for the medical staff and new techniques are therefore desirable. The aim of this work is to compare a new closed system for the preparation and administration of drugs with the traditional technique with regard to airborne emission and surface spillage of drugs. Platinum, determined using adsorptive voltammetry, was used as the tracer for airborne emission. Air samples were collected during the preparation and administration, and the collected platinum on the filters was determined by adsorptive voltammetry. For determination of spills and leakage onto surfaces the radioisotope 99m-technetium was used as a tracer. The radiation from the isotope was determined on protective gloves and bench covers after preparation and administration. The mean airborne emission was 6 ng m(-3) with the closed system and 15 ng m(-3) with the traditional pump technique. The average surface spillage using the closed technique was 0.005 microL. This is significantly smaller than with the traditional technique, which resulted in an average spillage of 64 microL. Our results also show that the dominant part of the leakage is surface spillage. Inexperienced nurses could also adequately handle the closed system.     

The Chemical Sensitivity Scale: Psychometric properties and comparison with the noise sensitivity scale

A questionnaire-based tool for quantifying self-reported affective reactions to and behavioral disruptions by odorous/pungent substances, called the Chemical Sensitivity Scale (CSS), analogous to the Noise Sensitivity Scale (NSS), was evaluated regarding psychometric properties. Twenty-six members from the Swedish Asthma and Allergy Association and 124 control participants responded to the CSS, the NSS, and to additional questions for evaluation of the validity of the CSS and NSS. The results showed that the CSS generates approximately normal distributions, has good test–retest reliability (r_xy=0.87), good internal consistency (r_α=0.88), and satisfying predictive and concurrent validity. These metric properties of the CSS and NSS were in general very similar. The content validity of the CSS is discussed. Two major dimensions of the CSS appear to represent sensory/somatic and neurasthenic symptoms, respectively. The analogy of the CSS to the NSS implies that use of both scales in combination may enhance understanding for the issue of general environmental sensitivity versus specific sensitivity to chemicals. Correlation coefficients between CSS and NSS scores for the asthma and allergy members (r_xy=0.40) and controls (r_xy=0.42) imply a moderate correspondence between chemical and noise sensitivity.     

Telomeric attrition with age and temperature in Eastern mosquitofish (Gambusia holbrooki)

Telomeric attrition has repeatedly been found to correlate with the ageing of organisms; however, recent research is increasingly showing that the determinants of attrition dynamics are not well understood. This study examined the relative telomere lengths in Eastern mosquitofish, Gambusia holbrooki, kept at different temperatures and at different ages. Newly born fry were randomly selected for one of four treatment groups: 20, 30, 20–30, and 30–20 °C, where the third and fourth treatment groups were gradually changed from their starting temperature to their final temperature between days 10 and 14. Telomere length was measured, and it was found that length decreased with age and that fish exposed to the 20 °C treatment had significantly shorter telomeres than those that received the 30–20 °C treatment. Telomeric attrition with age agrees with results previously found in studies of telomeres; however, the variation in attrition with temperature was not simply predictable and may be the synergistic effects of temperature and some other factor.     

Product life-cycle implications for remanufacturing strategies

For remanufacturing to be successful, there is a need to gain information on future market needs of remanufactured products, and match this to information on the magnitude of return flows. One of the major issues impacting remanufacturing is in the difficulty of obtaining used products (cores) that are suitable for remanufacturing. The timing and quantity of product returns is dependent on the type of product. Factors such as the mean product lifetime, rate of technical innovation, and failure rate of components all influence the return rate of products from end-of-use and end-of-life. The balance between product returns and demand for remanufactured products is a function of many variables, where the rate of technological innovation and the expected life of a product are the major influencing characteristics. The main contribution of this paper is the support that is provided in different supply and demand situations. By using a product life-cycle perspective, the supply and demand situations can be foreseen, and support given regarding possible strategies in these situations.     

Environmental evaluation of reuse of by-products as road construction materials in Sweden

Reuse of by-products in road construction is most often environmentally evaluated from the narrow perspective of the material itself, i.e. the material level. In this article, we argue that the current mainstream environmental evaluation of reuse of by-products in road construction should use wider system boundaries. In order to illustrate the importance of system boundaries to the final result, three additional levels that complement the material level, are applied to the environmental evaluation of reuse of by-products. In total these four levels of evaluation are, firstly, the material itself, mainly studied by leaching tests, secondly, the road environment studied by substance flow analysis, furthermore, a narrow life-cycle perspective and, finally, the industrial system level that addresses the reuse of by-products in a broader sense. Methods and tools applied to different levels emphasise different environmental aspects and consequently they are appropriate for addressing different questions. However, especially for the evaluation of environmental aspects on the industrial system level, there is a need to develop the methods. To apply these four levels to the evaluation would broaden the knowledge about the environmental impacts of the reuse of by-products. We argue that current leaching tests have to be complemented by the broader system boundaries used in substance flow studies and in life-cycle assessments in order to discuss the use of resources and environmental impacts from a wider perspective.     

In Search of Stability – Investigating Flexible and Stable Production Strategies for an Optimised Steel Plant

It is crucial for a steel making production system to operate at the lowest possible production cost, while satisfying stability and reliability conditions. To plan future production strategies, it is therefore important to be able to model the system behaviour when internal and external parameters are changed. In this study the sensitivity and stability of an optimised solution, of an integrated steel plant, have been investigated. The solution’s sensitivity has been analysed taking both internal process changes and external price variations into account, through applying both simulation and optimisation. The analysis also includes both costs and environmental issues such as carbon dioxide and sulphur emissions. Based on the methodology suggested, it is possible to determine the stability of the system solution, including both economic and environmental performance.     

Symptoms and Clinical Findings From the Musculoskeletal System Among Operators at a Call Centre in Sweden—A 10-Month Follow-Up Study

The musculoskeletal health among 57 operators at 1 call centre in Sweden was studied with 10 monthly follow-ups, parallel to a reference group of 1,226 professional computer users in other occupations. Operators at this call centre were more symptom-loaded than the other professional computer users in spite of their younger age and shorter exposure to computer work. Symptoms were long-lasting or recurrent. Muscle tenderness and nerve affections in the neck- shoulder region were the most common specific findings and diagnoses at medical examination of incident symptom cases. More extensive studies should be done on the working conditions and health status among call centre workers.     

Determination of antibiotic substances in hospital sewage water using solid phase extraction and liquid chromatography/mass spectrometry and group analogue internal standards

A method for determination of antibiotics in hospital sewage water has been developed and validated. Analogue internal standards for fluoroquinolones, sulfonamides, trimethoprim, beta-lactams (penicillins and cephalosporins), nitroimidazoles and tetracyclines were successfully used for calibration and shown to generally improve precision compared to external calibration. Matrix components caused ion suppression/enhancement effects during the MS detection for all analytes studied. Two effects were observed: general suppression and short-term variations in the MS response. In the hospital sewage water large temporal variations in the analyte concentration were observed during the course of the sampling period (seven grab samples in 13 h). Analyte concentrations varied within the following ranges (in microg l(-1)): ciprofloxacin, 3.6-101.0; metronidazole, 0.1-90.2; sulfamethoxazole, 0.4-12.8; ofloxacin, 0.2-7.6; trimethoprim, 0.6-7.6; and doxycycline, 0.6-6.7.