Inhibition of ethoxyresorufin-O-deethylase (EROD) activity in mixtures of 2,3,7,8-tetrachlorodibenzo-p-dioxin and polychlorinated biphenyls

Induction of ethoxyresorufin-O-deethylase (EROD) activity and porphyrin accumulation shows different structure-activity relationships for different polychlorinated biphenyls (PCBs) and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Interactions between the two responses can strongly influence the induction and activity of EROD. The results support the conclusion that there are nonadditive interactions between nondioxin-like PCBs and dioxin-like compounds. The interaction between EROD activity and the porphyrin biosynthesis makes the prerequisite of additivity in the toxic equivalency factor concept for environmental mixtures highly spurious. Inhibition of EROD activity caused by non-dioxin like compounds could have a significant impact on the value of EROD activity as a biomarker in the present methods of risk assessment for these compounds.     

Flux estimates and sedimentation of polychlorinated naphthalenes in the northern part of the Baltic Sea

The concentrations and fluxes of polychlorinated naphthalenes (PCNs) were measured in surface sediments, and settling particulate matter collected in sediment traps, at two coastal and two offshore sampling stations in the Gulf of Bothnia, northern Baltic Sea, Sweden. The PCN concentrations (of tetra- to hepta-chloro congeners) in the surface sediments ranged from 0.27 to 2.8 ng/g dry weight and were of the same order of magnitude as background concentrations reported previously in Europe. The PCN fluxes in the southern basin (0.93 and 0.86 microg/m2/year) of the Gulf of Bothnia were higher than those in the northern basin (0.58 and 0.49 microg/m2/year); they were also higher near the coast than in the open sea. These PCN fluxes are similar to the pre-industrial levels determined from lake sediments in northwest England. The PCN homologue distribution changed from a relatively even distribution in samples collected near the coast, to TeCNs dominating in the samples from the open sea. This indicates that higher chlorinated PCNs are deposited and retained in sediments to a higher degree near the coast. The total annual deposition of PCNs in sediments in the Gulf of Bothnia was estimated to be 91 kg/year.     

Low-resolution mass spectrometric relative response factors (RRFs) and relative retention times (RRTs) on two common gas chromatographic stationary phases for 87 polychlorinated dibenzofurans

All 87 tetra- to octa-chlorinated dibenzofurans (PCDFs) were analysed using high-resolution gas chromatography/low-resolution mass spectrometry (HRGC-LRMS). The mass spectrometer was operated in two different modes: electron ionisation (EI), and negative ion chemical ionisation (NCI) with methane as a reagent gas. Baseline separation and identification of all PCDF congeners was carried out using one non-polar (DB-5) and one polar (RT-2330) capillary GC column. Relative retention times (RRTs) on both columns, and relative response factors (RRFs) in both EI- and NCI-modes, were calculated for all 87 of the PCDFs. Comparison of the EI-RRFs and NCI-RRFs showed that the mass spectrometric NCI-responses varied to a higher degree than the EI-responses. The level of NCI-response was dependent on the substitution positions of the chlorine atoms on the dibenzofuran molecule skeleton. The ratio between the highest and lowest RRFs was 26 in the NCI-mode, but only 2.3 in the EI-mode. Thus, quantification of tetra- to octa-CDFs in environmental samples using the NCI-mode will result in incorrect estimates of PCDF concentrations unless 13C-labelled internal standards are used for each congener, or RRFs are taken into consideration. In contrast, the quantification of PCDFs in the EI-mode using a single internal 13C-labelled PCDF standard for each PCDF homologue is accurate according to the findings in this investigation. A flue gas sample from a municipal solid waste incinerator (MSWI) analysed in the NCI-mode was quantified with and without NCI-RRFs. When using NCI-RRFs the reported concentration of SigmaPCDFs in the flue gas sample increased by 40%. Furthermore, TCDF analysis was compared using two mass spectrometers (a VG 12-250 and a Finnigan 4500) operating in EI-mode. These quadrupole instruments performed equally well, giving similar EI-RRFs for the tested compounds.     

A method for measuring the potential dermal exposure to methyl methacrylate during two different dental technical work tasks

Dental technicians are exposed on a daily basis to undiluted methyl methacrylate (MMA) when performing various routine tasks. Although the clinical effects of this chemical have been known for decades, no previous studies have been performed to estimate the potential dermal exposure to it. In this study we describe a patch-sampling technique to intercept the MMA that would otherwise have contaminated the skin on different parts of the hand and lower arm. Two different work tasks, making an orthodontic splint and denture preparation, were both performed under simulated workplace conditions twice by two recent graduated dental technicians. Air measurements were collected simultaneously. The results indicate that the exposure patterns associated with producing an orthodontic splint and denture preparation differed. We found work task-dependent differences in the amounts of MMA collected at the different parts of each hand, and differences between the right and left hands. There was also an interaction between hand and work task, especially for the right hand. The air measurements were positively correlated with the dermal exposure. This study highlights the importance of using a measurement strategy that takes the variability within the hand/arm body parts into account when measuring potential exposure during these kinds of work tasks. In order to establish future dermal exposure limits, more workplace and experimental studies are required.     

Government plans and farmers intentions: a study on forest land use planning in Vietnam

In 1998, the Vietnamese National Assembly approved a Five Million Hectare Reforestation Program, (5MHRP) 1998-2010. It would increase forest cover by some 45%, use barren hills, produce wood, and generate socioeconomic development. It would, however, also put demands on Vietnamese planning. Experiences from a former development project and two case studies from a commune and village are used as a basis for analyzing the planning system. The study describes the objectives and strategies of government and farmers in one commune and one village and analyzes how planning data influence scenarios on future development. Official planning data do not reflect reality but are derived through negotiations. In the commune and village studied, it would be difficult for the 5MHRP to materialize, as most of the forest land, officially not yet used, is actually used for food production. The approach and method used by the study offers alternatives to current planning practices.     

A one year study of the seasonal variations of sDDT and PCB levels in fish from heated and unheated areas near a nuclear power plant

An investigation of the influence of excess heat discharge from a nuclear power plant on the residual levels of the sDOT and PCB in roach and perch has been made during a period of one year. A seasonal variation of the residual concentrations was observed, with the highest levels during spring and early summer and lower more stable levels in the autumn. Significantly higher levels of the sDDT and PCB was observed in perch from the cooling water recipient as compared to values in perch from the intake area. No significant differences could however be verified for roach. The result stress the importance that, in a monitoring program, a sampling period with stable ecological conditions is selected.     

A Regional Cadmium Inventory: interpretation and management

Local authorities in Sweden are responsible for the management of sewage treatment and municipal solid waste. Due to this, they handle large flows and stocks of materials and substances that may be harmful for the environment. However, knowledge about these flows is sometimes deficient. In addition, the capacity to influence the composition of these flows is mainly beyond the jurisdiction of the local authorities. Flow-oriented studies, such as substance flow analysis (SFA), have proven to be a useful tool in order to understand and quantify these flows. Furthermore, SFA is sometimes claimed to be beneficial to the process of decision making, since it generates comprehensive overviews of the substance in focus. However, quantification of stocks and flows of a certain substance does not necessarily provide sufficient information for environmental management on the local level. Hence, for SFA to further contribute to the environmental management process, there is also a need for development in the interpretation of the results. The main objective of this paper is to contribute to the discussion about (1) how to interpret the results from SFA and (2) how the results from an SFA can be used in environmental management by local authorities. A tentative framework for interpretation is discussed in the paper, focusing on five aspects: total material quantities, exposure to humans and the environment, resource economy, function and capacity to influence the substance flows. Furthermore, the paper discusses the suggested framework applied to results of a regional cadmium inventory.     

Solid waste treatment within the framework of life-cycle assessment

Traditionally, treatment of solid waste has been given limited attention in connection with life-cycle assessments (LCAs). Often, only the amounts of solid wastes have been noted. This is unsatisfactory since treatment of solid waste, e.g. by landfilling or incineration, is an operation, requiring inputs and producing outputs, which should be described in the inventory of an LCA, in parallel to other operations. However, there are difficulties in describing emissions from solid waste treatments and there is a need for development of such methods. In this paper an approach for describing emissions from incineration and landfilling is outlined. Methodological questions concerning the time-frame and allocation principles are discussed. Methods for estimating potential emissions from landfilling of municipal solid waste and industrial wastes are suggested. The methods are used for calculating potential emissions from landfilling of some typical wastes. These emissions are compared with the emissions from other stages in the life cycle for some materials and wastes. it is shown that the potential emissions from landfilling are, for some products, of importance for the final results. Hence, if emissions from landfilling are neglected, or underestimated, results and conclusions in an LCA may be misleading.     

Cadmium in sewage sludge in a Swedish region: sources and reduction opportunities

To create a more sustainable future, one of the Swedish government’s aims is to close the eco-cycles between urban consumption areas and arable land. Increasing the use of sewage sludge from municipal wastewater treatment plants (MWTPs) is one method of achieving this goal. However, the use of sewage sludge is often prohibited due to its high concentrations of cadmium. As a consequence, large amounts of sewage sludge are deposited each year in landfills. This disposal has become more expensive for local authorities due to a new deposit tax introduced in the year 2000. Based on a survey of cadmium sources to MWTPs in a Swedish region this paper focuses on opportunities local authorities in Sweden have to influence the occurrence of cadmium in the sewage sludge. The results from the study show that cadmium in sewage sludge originates from diffuse sources, which are hard for local authorities to influence by direct means. This is most obvious for sources of cadmium in wastewater from households, which causes about one-third of the inflow of cadmium to MWTPs. Thus, the local authorities’ possibilities are, in general, still restricted to downstream actions (such as disconnecting identified industrial sources and reconstructing the sewage system to further separate collection of wastewater and storm water). Local authorities could also implement changes in the process at the MWTP or an extended treatment of the sewage sludge generated. Nonetheless, these possible measures do not provide a sustainable solution to the cadmium issue since the origins of the sources remain. Hence, long-term strategies — outside of the scope of local authorities — need to focus on a general decrease of cadmium in society. However, increased knowledge about the distribution among different sources of cadmium to MWTPs may encourage local authorities to establish priorities for measures that will improve the quality of the sewage sludge.