三种固体废弃物综合利用的初步研究

从环境建设的可持续发展出发 ,结合天津开发区在基础设施及园林绿化建设中面临土源紧缺以及周边地区存在大量的海湾泥、粉煤灰、碱渣土等固体废弃物的现实 ,在详细研究了3种废物的物理、化学性质的基础上探讨了用这些废物代替农田客土的可行性。实验及推广应用结果表明 ,这些废物按适当比例混合后能够形成一种可替代种植客土的新型土壤 ,这种新型土壤的最佳配比(即海湾泥与粉煤灰或碱渣土 )比例为3:1 ,同时该配比基质对植物生长的适宜性优于滨海盐土。     

Practical environmental monitoring of major construction projects

Independent teams undertook environmental monitoring of particular concentrations of major construction projects forming part of Hong Kong’s U.S. $20 billion airport infrastructure programme located in dense urban areas. The team combination of environmental specialists with experienced civil engineers enabled pragmatic mitigation measures to be developed and accepted by the construction personnel with the result that potentially significant adverse impacts were averted. The authors discuss the mechanism and success of this innovative approach.     

GIS在环境监测数据管理分析中的应用

根据环境监测的特点和地理信息系统(GIS)所具备的功能,讨论了GIS与环境监测结合的必要性,按照环境监测的目的不同分环境质量监测、污染源监督监测和应急监测三个方面阐述GIS在环境监测数据管理分析中的具体应用,并利用现有的一些基于GIS的环境监测信息系统实例进行进一步说明GIS在环境监测数据管理分析中的应用,充分发挥了GIS空间信息表达处理及综合分析的优势,使得环境监测数据的管理分析更加快速、实时、有效.随着GIS技术的发展,GIS在环境监测数据管理分析中的应用也将获得源源不绝的驱动力.     

湘东北中生代基性岩脉微量元素地球化学特征及岩石成因

湘东北中生代基性岩脉可以分为煌斑岩和辉绿岩两类 ,前者形成于 136 .6 1Ma ,后者形成于 86 .18Ma ,与华南中生代主要拉张时期相对应。岩石富集LREE ,Eu负异常不明显 ,其形成主要受地幔部分熔融作用制约。早期煌斑岩类微量元素和Sr、Nd同位素总体上具有富集地幔 (EMⅡ型 )洋岛玄武岩 (OIB)特征 ,富集Nd、P、Cs,而K、Rb、Sr、U、Th等富集程度不明显 ,Ta、Nb略有富集 ,具有软流圈地幔上涌地幔热柱玄武岩岩浆源区性质 ,表现出软流圈地幔上涌部分熔融的成岩特点。晚期辉绿岩类表现出Ta、Nb、Ti亏损 ,但LILE并不富集 ,反映地壳混染程度的增强 ,具有大陆拉张带 (裂谷初期 )形成的玄武岩岩浆源区性质 ,为岩石圈地幔部分熔融形成。二者具有不同的岩浆源区性质 ,从早期到晚期岩浆源区向上迁移并致使部分陆壳物质混入 ,反映由热点式拉张到岩石圈伸展 减薄的作用过程。     

L型栓子成形及模具结构

简要论述了L型栓子的成形方法、注意事项与模具结构,其方法简单可靠.     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

废气污染控制高新技术的研究与应用

列举了大量的事实，重点介绍了几种高新技术在废气污染控制中的研究与应用，说明了向环保发展迟缓领挑战依赖于科学技术，而环保的发展又向科学技术提出了更高的要求。     

GIS在环境影响评价中的应用

简要介绍了环境影响评价（EIA）和地理信息系统（GIS）技术的特点，阐述了两者结合的必要性。讨论了GIS技术在环境影响评价领域中的应用现状，重点介绍了GIS技术在项目EIA、区域EIA、累积EIA及战略EIA，环境影响后评价中的应用。在此基础上进一步对GIS在环境影响评价中的应用进行了展望，重点介绍了GIS在公众参与中的应用及基于“5S”的EIA。     

全程自养脱氮工艺的研究

以悬浮填料床作为全程自养脱氮反应器，用不含有机碳的合成氨氮废水进行反应器的启动。系统的氨氮和总氮去除率分别达80％和60％左右。通过批式实验对全程自脱氮做进一步的研究。结果表明，通过控制反应器中DO的浓度，可以控制氨氧化和反硝化的比率；当DO为0.8mg/L时，氨氮几乎完全转化为氮气，氨氧化和反硝化在此时达到了动态平衡；在低DO情况下，氨氮和亚硝氮同时存在，氨氮和总氮的转化率都大幅度的提高，说明氨氮可以亚硝氮为电子受体，在无外加有机碳源的情况下进行反硝化。     

对GB17323-1998《瓶装饮用纯净水》标准的看法

本文对GB17323—1998《瓶装饮用纯净水》标准中电导率、氯化物、pH、高锰酸钾消耗量等指标的标准值的测定方法提出了不同看法，并建议了更为有效的测定方法。