Metal distribution in marine sediments of the Mar Piccolo in Taranto (Ionic Sea,southern Italy)

The spatial distribution of selected metals (Fe, Ni, Mn, Zn, Cu, Pb, Hg and Cd) and their partition in the different chemical forms (speciation) were determined in benthic sediments from Mar Piccolo, Taranto (Ionic Sea, southern Italy). The aim of this study was to assess the degree of sediment contamination and bioavailability of metals, very important for Italian mussel culture, in a semi-enclosed marine ecosystem. In sediments, grain size distribution, total organic carbon (TOC), and humic (HA) and fulvic (FA) acids contents were also determined. The compounds TOC, HA and FA, in fact, have a great influence on metal complexation. High concentrations of copper, lead, zinc and mercury were found, especially in sediments of the first inlet of Mar Piccolo. Statistical analysis of results shows significant correlation among Cu, Pb and Zn concentrations and the influence of organic matter on the sediment distribution of Cu, Pb and Zn. Metal speciation analysis, carried out with sequential extraction method, shows that Fe and Ni are present in sediments mainly as sulphides. Mn and Pb are present principally in an ion-exchangeable form or bound to carbonate and Cu is associated to organic matter. Metal pollution index (MPI), calculated as a weighed mean of the metal contamination factors in each station, shows that with regard to Cu, Ni, Pb and Zn, some stations investigated are unpolluted (MPI <1), whereas in other areas, pollution level is not very high. On the contrary, for mercury, the pollution level in the first inlet of the basin is very high.     

Are children playgrounds safe play areas? Inorganic analysis and lead isotope ratios for contamination assessment in recreational (Brazilian) parks

Environmental Science and Pollution Research - In city playgrounds, there is a potential risk of harming children’s health by contamination coming from anthropogenic activities. With the aim...     

Strategies for the enhancement of automobile shredder residues (ASRs) recycling: Results and cost assessment

With reference to the European regulation about the management of End-of-Life Vehicles (ELVs), Directive 2000/53/EC imposes the achievement of a recycling target of 85%, and 95% of total recovery by 2015. Over the last few years many efforts have been made to find solutions to properly manage the waste coming from ELVs with the aim of complying with the targets fixed by the Directive.This paper focuses on the economical evaluation of a treatment process, that includes physical (size and density), magnetic and electrical separations, performed on the light fraction of the automobile shredder residue (ASR) with the aim of reducing the amount of waste to dispose of in a landfill and enhancing the recovery of valuable fractions as stated by the EU Directive. The afore mentioned process is able to enhance the recovery of ferrous and non-ferrous metals of an amount equal to about 1% b.w. (by weight) of the ELV weight, and to separate a high energetic-content product suitable for thermal valorization for an amount close to (but not higher than) 10% b.w. of the ELV weight.The results of the economical assessment led to annual operating costs of the treatment ranging from 300,000 €/y to 350,000 €/y. Since the considered plant treats about 13,500 metric tons of ASR per year, this would correspond to an operating cost of approximately 20–25 €/t. Taking into account the amount and the selling price of the scrap iron and of the non magnetic metal recovered by the process, thus leading to a gain of about 30 €/t per ton of light ASR treated, the cost of the recovery process is balanced by the profit from the selling of the recovered metals. On the other hand, the proposed treatment is able to achieve the fulfillment of the targets stated by Directive 2000/53/EC concerning thermal valorization and reduce the amount of waste generated from ELV shredding to landfill.     

(M)VOC and composting facilities. Part 1: (M)VOC emissions from municipal biowaste and plant refuse

GOAL, SCOPE AND BACKGROUND: Malodorous volatiles derived from the decomposition of biowaste within the process of composting might pose a risk to human health. Different techniques of process engineering have been developed to minimise the burden of malodorous compounds in air possibly affecting compost workers and residents in the vicinity. METHODS: In the present study, three different composting facilities were examined for the emission of volatiles to estimate the impact of process engineering on the dispersal of odorous compounds and to discuss its relevance for human health. RESULTS AND DISCUSSION: Concentrations of single compounds belonging to alcohols, ketones, furanes, sulfur-containing compounds and especially terpenes ranged from 10(2) up to nearly 10(6) ng/m3 depending on the sampling sites and the process engineering. The ratio of MVOC and total VOC measured changed throughout the process of biodegradation. A certain combination of volatile compounds coincided with the occurrence of typical compost odour. CONCLUSION: The type of process engineering seemed to have a major impact on the emission of volatiles, as amounts of (microbial) volatiles emitted were characteristic for the different techniques used. Thus, the MVOC emission basically depends on the degree of biodegradation. It is likely that the concentrations workers are exposed to can have an impact on human health. RECOMMENDATIONS AND OUTLOOK: It is obvious that less sophisticated types of process engineering give rise to greater amounts of bioaerosols and volatiles and, therefore, technical devices have to be improved and controlled regularly to minimise adverse health effects on workers.     

Catalytic NO(chi) reduction with simultaneous dioxin and furan oxidation

The engineering, construction, performance and running costs of a catalytic flue gas cleaning component in the low dust area of a municipal waste incinerator is discussed. For this purpose, the case study of a Flemish incineration plant is presented, covering the history, the design procedure of the catalyst, relevant process data and the financial aspects. A reliable PCDD/F-destruction by means of oxidation by the catalyst to typical values of 0.001 ng TEQ/Nm3 has been demonstrated. At the same time, NO(chi)- and CO-emissions are reduced by 90% and 20% to about 50 mg/N m3 andbelow 10 mg/N m3, respectively.     

Differential pulmonary inflammation and in vitro cytotoxicity of size-fractionated fly ash particles from pulverized coal combustion

Exposure to airborne particulate matter (PM) has been associated with adverse health effects in humans. Pulmonary inflammatory responses were examined in CD1 mice after intratracheal instillation of 25 or 100 microg of ultrafine (< 0.2 microm), fine (< 2.5 microm), and coarse (> 2.5 microm) coal fly ash from a combusted Montana subbituminous coal, and of fine and coarse fractions from a combusted western Kentucky bituminous coal. After 18 hr, the lungs were lavaged and the bronchoalveolar fluid was assessed for cellular influx, biochemical markers, and pro-inflammatory cytokines. The responses were compared with saline and endotoxin as negative and positive controls, respectively. On an equal-mass basis, the ultrafine particles from combusted Montana coal induced a higher degree of neutrophil inflammation and cytokine levels than did the fine or coarse PM. The western Kentucky fine PM caused a moderate degree of inflammation and protein levels in bronchoalveolar fluid that were higher than the Montana fine PM. Coarse PM did not produce any significant effects. In vitro experiments with rat alveolar macrophages showed that of the particles tested, only the Montana ultrafine displayed significant cytotoxicity. It is concluded that fly ash toxicity is inversely related with particle size and is associated with increased sulfur and trace element content.