One-Year Study of the Elemental Composition and Source Apportionment of PM10 Aerosols in Florence,Italy

Abstract

An extensive investigation was carried out for the characterisation of the air particulate composition in Florence. The aim was to determine the aerosol elemental concentrations, as well as to identify pollution sources. For our investigation, the external Particle-Induced X-Ray Emission–Particle-Induced γ-Ray Emission beam facility of the Istituto Nazionale di Fisica Nucleare, Van de Graaff accelerator at the Physics Department of the Florence University was used. We report the results of the analysis of a long temporal series (approximately 1 yr) of PM₁₀ particulate samples, collected on Millipore filters on a daily basis in three different sites (characterised by different urban settings). Daily concentrations of more than 20 elements were detected. The long sampling period (approximately 1 yr) allowed a comparison with the air quality recommended values and the identification of seasonal variations. Four main sources (traffic, oil-combustion, soil-dust, and wind transported sea-salt) were extracted with the help of Principal Component Analysis (PCA). An absolute PCA showed traffic to be the major source both in the high traffic site and in the urban background site.     

Anthropogenic contaminants in freshwater from the northern Antarctic Peninsula region

This study aimed to evaluate the presence of ultraviolet filters (UV-Fs), benzotriazoles, pyrethroids and per- and polyfluoroalkyl substances (PFASs) in freshwater and wastewater from the northern Antarctic Peninsula region. All water samples analyzed contained UV-Fs residues and high concentrations were detected in anthropogenic impacted sites (< LOD up to 1300 ng/L). Likewise, benzotriazoles were detected in all water samples (< LOQ–920 ng/L). Regarding suspended particulate matter, almost all UV-Fs and all benzotriazoles were measured at concentrations ranging from < LOQ to 33 µg/g dry weight. Pyrethroids were also detected (< LOQ–250 ng/L) and their presence implies the existence of a gateway to the Antarctica Peninsula from other regions. The data confirmed the presence of PFASs (< LOD–7500 ng/L) in this area, in agreement with previous studies. In light of these results, extended monitoring in Antarctica should be carried out to perform a reliable environmental risk assessment leading to propose recommendations to minimize the anthropic impact.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01404-x) contains supplementary material, which is available to authorized users.     

Evaluating surrogates of genetic diversity for conservation planning

Protected-area systems should conserve intraspecific genetic diversity. Because genetic data require resources to obtain, several approaches have been proposed for generating plans for protected-area systems (prioritizations) when genetic data are not available. Yet such surrogate-based approaches remain poorly tested. We evaluated the effectiveness of potential surrogate-based approaches based on microsatellite genetic data collected across the Iberian Peninsula for 7 amphibian and 3 reptilian species. Long-term environmental suitability did not effectively represent sites containing high genetic diversity (allelic richness). Prioritizations based on long-term environmental suitability had similar performance to random prioritizations. Geographic distances and resistance distances based on contemporary environmental suitability were not always effective surrogates for identification of combinations of sites that contain individuals with different genetic compositions. Our results demonstrate that population genetic data based on commonly used neutral markers can inform prioritizations, and we could not find an adequate substitute. Conservation planners need to weigh the potential benefits of genetic data against their acquisition costs.     

Software for prioritizing conservation actions based on probabilistic information

Marxan is the most common decision-support tool used to inform the design of protected-area systems. The original version of Marxan does not consider risk and uncertainty associated with threatening processes affecting protected areas, including uncertainty about the location and condition of species’ populations and habitats now and in the future. We described and examined the functionality of a modified version of Marxan, Marxan with Probability. This software explicitly considers 4 types of uncertainty: probability that a feature exists in a particular place (estimated based on species distribution models or spatially explicit population models); probability that features in a site will be lost in the future due to a threatening process, such as climate change, natural catastrophes, and uncontrolled human interventions; probability that a feature will exist in the future due to natural successional processes, such as a fire or flood; and probability the feature exists but has been degraded by threatening processes, such as overfishing or pollution, and thus cannot contribute to conservation goals. We summarized the results of 5 studies that illustrate how each type of uncertainty can be used to inform protected area design. If there were uncertainty in species or habitat distribution, users could maximize the chance that these features were represented by including uncertainty using Marxan with Probability. Similarly, if threatening processes were considered, users minimized the chance that species or habitats were lost or degraded by using Marxan with Probability. Marxan with Probability opens up substantial new avenues for systematic conservation planning research and application by agencies.     

Evaluation of an Exposure Assay to Measure Uptake of Sediment Pah by Fish

The ecological risks of polynuclear aromatic hydrocarbons (PAH) in aquatic sediments will vary with both toxicity and bioavailability to aquatic biota. While there are standardized protocols to test the acute toxicity of sediment-borne compounds to aquatic invertebrates, there are none for assessing bioavailability to fish. We found that sediment-borne PAH caused an exposure-dependent induction of cytochrome P450 (CYP1A) enzymes in rainbow trout (Oncorhynchus mykiss) fingerlings exposed in semi-static 96 h bioassays, as shown by increased activity of ethoxyresorufin-o-deethylase (EROD). Assuming that PAH are taken up by trout due to partitioning from organic and inorganic constituents of sediments, we tested the effect of different test variables on bioaccumulation using induction as an index of exposure. EROD activity increased with exposure of fish to increasing volumes of sediments containing PAH, i.e., with increasing ratios of sediment to water. Uptake of single compounds from sandy sediments did not differ from uptake from clay or low organic (7% LOI — loss on ignition) sediments, but decreased when organic content was very high (58% LOI). Maximum induction was observed within 24~h of exposure and at 7.5^C relative to 15, 22, or 28^C. Storage and handling techniques had minor effects on sediment EROD induction potency. Absolute EROD activity was greater in white sucker (Catostomus commersoni) a benthic species, than in trout, a pelagic species. However, when basal (negative control) activity was accounted for, there was no difference in response between the species. Together, these experiments provide a basis for developing a standard protocol to test the bioavailability to fish of sediment-borne PAH.     

Contamination Levels and Preliminary Assessment of the Technical Feasibility of Employing Natural Attenuation in 5 Priority Areas of Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil

Five priority areas of potential impact by contaminants (API) were investigated at the Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil with the following aims: (i) to identify both organic and inorganic contaminants present in soil and groundwater; (ii) to define the environmental conditions relevant for microbial activity at the site and (iii) to evaluate the feasibility of employing natural attenuation for treatment of the hydrocarbon contamination. One area (API 1) was an uncontrolled landfill, where waste materials from the refinery were deposited between 1954 and 1986, and four areas (API 4, 5, 7 and 11) were located in the operational section of the refinery. Soil contamination by regulated BTEX compounds (benzene, toluene, total xylenes) was restricted to two samples from API 1. Nonregulated ethylbenzene was detected in one soil sample from API 4, one from API 5 and two from API 1. No soil contained regulated PAH above threshold levels. Several nonregulated PAHs were found in 6 soil samples from API 1, 3 soil samples from API 4 and 1 soil sample from API 5. Site soils contained very high aluminium concentrations, but metal contamination was restricted to one soil sample from API 1, which contained nickel above threshold limits. BTEX contamination of groundwater was due mostly to benzene. Of the 17 PAH molecules tested, only naphthalene and 2-methylnaphthalene occurred in groundwater. The sum of total BTEX and total PAH exceeded 200 μg/L in only a few monitoring wells in API 4, 5 and 11 and was always below 2.640 μg/L. Be, Cd, Cr, Cu, Hg, Ni, Se, Ag, Tl and Zn were not detected in groundwater, which was contaminated in a few locations by aluminium (mostly below 1 mg/L), lead (<0.066 mg/L) and arsenic (<0.056 mg/L). S, K, Ca, Mg and Fe were present in groundwater in excess of physiological requirements for microbial growth, but low concentrations of N and P could become growth limiting. However, BTEX were efficiently degraded in saturated and unsaturated zone microcosms and nutrient amendments did not stimulate biodegradation rates measurably. The inorganic carbon pool in groundwater was up to one order of magnitude larger than the organic carbon pool. Total inorganic carbon (TIC) in API groundwater exceeded TIC of clean groundwater by factors of 2 (API 4), 6 (API 5, 7 and 11) or 10 (API 1). Most of the inorganic carbon incorporated into groundwater beneath the refinery originated from biodegradation in the unsaturated soil, which contained a microbiota (10⁶ cells/g on average) capable of growth with most of the pure (benzene, toluene, ethylbenzene and xylene) and mixed hydrocarbons tested (diesel oil, gasoline, naphtha, condensate, aromatic residue and fuel oil). A viscous hydrocarbon paste uncovered in API 1 was insoluble in water but dissolved in dichloromethane. Many organic components of this paste were biodegradable as evidenced by weight reduction of the hydrocarbon paste and by the growth of suspended and attached biomass in saturated zone microcosms, where the paste was the only carbon source. This study indicates that monitored natural attenuation may be a technically feasible and efficient means for plume control in API 1, 4 and 5, provided the plumes in API 4 and 5 are not expanding. This technique is not suitable for contaminant reduction in API 11.     

Bisphenol A endocrine disruptor complete degradation using TiO2 photocatalysis with ozone

Bisphenol A is an endocrine disruptor. Complete mineralization of bisphenol A is therefore a primary environmental issue. Here, the combination of ozonation and photocatalysis by TiO₂ is proposed for the degradation and final mineralization of bisphenol A. TiO₂ films deposited onto two sides of an Al lamina show good stability and high surface roughness. We used a specific experimental setup employing two facing ultraviolet lamps and TiO₂ layers, together with an ozone flux. High-performance liquid chromatography–mass spectrometry determinations on bisphenol A solutions sampled at different reaction times and Fourier Transform Infrared analyses of the oxide at the end of the reaction were performed to study the reaction intermediates and the overall degradation mechanism. Our results show that pollutant mineralization achieved with the combined method is far higher, of 55% in the case of 0.3 mM bisphenol A, than those obtained by individual treatments such as photolysis (<3%), ozonation (6%), photocatalysis (6%), and by other combined processes: photolytic ozonation (13%) and catalytic ozonation (15%). This finding is explained by the occurrence of highly synergistic effects.     

As(V)-reduction to As(III) by arsenic-resistant Bacillus spp. bacterial strains isolated from low-contaminated sediments of the Oliveri-Tindari Lagoon,Italy

Five arsenic-resistant bacterial strains designated MT1, MT2, MT3, V1 and V2 were isolated from sediments of the Oliveri-Tindari Lagoon (Italy), which comprises six small lakes whose sediments contain low arsenic concentrations. Phylogenetic analysis of the 16S rRNA gene sequences assigned them to the genus Bacillus. Bacillus sp. strain MT3 showed higher tolerance to As(III) and As(V), as indicated by minimum inhibitory concentrations of 14 and 135 mmol^?1, respectively. Bacillus sp. strain V1 showed growth inhibition at 14 mmol^?1 in the presence of As(III) and at 68 mmol^?1 in the presence of As(V), whereas the arsenic resistance of Bacillus sp. strain MT1 was 10 and 27 mmol^?1 for As(III) and As(V), respectively. The strains Bacillus spp. MT2 and V2 showed low levels of As(III) and As(V) resistance, as it was unable to grow at concentrations>7 and 14 mmol^?1, respectively. The isolated arsenic-resistant Bacillus spp. strains were able to reduce As(V) to As(III), especially Bacillus spp. strain MT3. This study suggests that the isolated bacterial strains play a role in the arsenic biogeochemical cycle of arsenic-poor sediments in the Oliveri-Tindari Lagoon.     

Characterization of post-consumer polyolefin wastes by hyperspectral imaging for quality control in recycling processes

In this paper new analytical inspection strategies, based on hyperspectral imaging (HSI) in the VIS–NIR and NIR wavelength ranges (400–1000 and 1000–1700 nm, respectively), have been investigated and set up in order to define quality control logics that could be applied at industrial plant level for polyolefins recycling. The research was developed inside the European FP7 Project W2Plastics “Magnetic Sorting and Ultrasound Sensor Technologies for Production of High Purity Secondary Polyolefins from Waste”. The main aim of the project is the separation of pure polyethylene and polypropylene adopting an innovative process, the magnetic density separation (MDS). Spectra of plastic particles and contaminants resulting from post-consumer complex wastes and of virgin polyolefins have been acquired by HSI and by Raman spectroscopy. The classification results obtained applying principal component analysis (PCA) on HSI data have been compared with those obtained by Raman spectroscopy, in order to validate the proposed innovative methodology. Results showed that HSI sensing techniques allow to identify both polyolefins and contaminants. Results also demonstrated that HSI has a great potentiality as a tool for quality control of feed (identification of contaminants in the plastic waste) and of the two different pure polypropylene and polyethylene flow streams resulting from the MDS-based recycling process.     

Evaluation of a simultaneous sampling method of PAHs, PCDD/Fs and dl-PCBs in ambient air

The Stockholm Convention on Persistent Organic Pollutants (POPs) was signed in May 2001 by 127 countries. Currently, 12 substances are regulated by the convention, and the work on finding new candidate chemicals to the convention has started. Among these 12 substances, dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) are the objects of this study. There are no European standard methods for the simultaneous determination of these microorganic compounds, together with polycyclic aromatic hydrocarbons (PAHs) in ambient air--they must be referred to three different methods developed by the U.S. Environmental Protection Agency (EPA). The quali-quantitative analysis of these microorganic pollutants is an important challenge due to the low concentrations at which they may be present. In this study, the development of a simplified, alternative, fast and affordable sampling method for the determination of PAHs, PCDDs, PCDFs and PCBs in ambient air was performed. The sampling time was extended from 24 h to 7 d in order to enrich the sample, to fall within the instrumental limits of detection and to reduce the number of samples to be processed and, therefore, errors that may arise. First of all, experiments with labelled standards were conducted in the research area of Montelibretti (rural station, which is sited about 20 km northeast of Rome), with the purpose of optimizing sampling efficiency. Finally, the method was applied to the analysis of these compounds in the air of a suburban area with small industrial plants in order to evaluate the feasibility of the proposed sampling method system, by comparing concentrations of native compounds acquired during simultaneous daily and weekly sampling.