Removal of Cu(II) from aqueous solution in a fluidized-bed reactor

In this study, a fluidized-bed reactor (FBR) was employed to treat copper-containing wastewater by mean of copper precipitation on the surface of sand grains. The conditions for optimum copper removal efficiency were also investigated. This technology was controlled so as to keep supersaturation low to induce the nucleated precipitation of copper coating on the sand surface in an FBR. The effects of relevant parameters, such as the pH value, the molar ratio of [C(T)] to [Cu(2+)], hydraulic loading and the types of chemical reagents used, were examined. The experimental results indicated that 96% copper removal efficiency could be achieved when the influent copper concentration was 10mg l(-1). The optimum chemical reagent was Na(2)CO(3); the molar ratio of [C(T)]/[Cu(2+)] was 2, and the optimal hydraulic loading was not be more than 25m h(-1). In addition, preventing homogeneous nucleation in the FBR was an important operation parameter. Homogeneous nucleation and molecular growth would lead to undesirable microparticle formation in the effluent. A good mixture of carbonate and copper in the presence of sand grains could reduce the level of homogeneous nucleation in the bottom of the reactor. Energy dispersive analysis (EDS) of X-rays provided insight into the copper coating on the sand surface, and element analysis indicated the weight percentages of CuCO(3) and Cu(OH)(2) in precipitate.     

The properties of emulsifiers that enhance the replication of viruses in cell cultures

Some of a variety of commercial emulsifiers were capable of enhancing the sensitivity of mammalian cells in culture to infection with several viruses. Those viruses which were enhanced in their replication were single-stranded RNA viruses whereas the double-stranded viruses tested were non-responders. In addition, some cells lines, as compared to others, responded in a more sensitive manner to the active emulsifiers.     

Organotin contamination in fishes with different living patterns and its implications for human health risk in Taiwan

Contaminated levels of butyl- and phenyltin compounds, tributyltin (TBT), dibutyltin (DBT), monobutyltin (MBT), triphenyltin (TPT), diphenlytin (DPT), and monophenyltin (MPT), were investigated in pelagic, demersal and cultured fish species from different seasons and locations in Taiwan. Seasonal variations were found in fishes from Wuchi and Hsingta fishing harbors for their butyltin levels (winter>summer) with the opposite trend for phenyltins in fishes from Patoutzu fishing harbor and demersal fishes from four fishing harbors (summer>winter). Fish liver contained the lowest percentage of TBT and the highest percentage of TPT among six organotin compounds. Consumption of contaminated pelagic species and fishes from Hsingta fishing harbor had the highest hazard index. However, the hazard quotients and hazard indices were all less than 1, suggesting a daily exposure at these levels of TBT, DBT and TPT may not be likely to cause any deleterious effects during lifetime in human population.     

Degradation characteristics of toluene,benzene, ethylbenzene,and xylene by Stenotrophomonas maltophilia T3-c

Stenotrophomonas maltophilia T3-c, isolated from a biofilter for the removal of benzene, toluene, ethylbenzene, and xylene (BTEX), could grow in a mineral salt medium containing toluene, benzene, or ethylbenzene as the sole source of carbon. The effect of environmental factors such as initial toluene mass, medium pH, and temperature on the degradation rate of toluene was investigated. The cosubstrate interactions in the BTEX mixture by the isolate were also studied. Within the range of initial toluene mass (from 23 to 70 pmol), an increased substrate concentration increased the specific degradation of toluene by S. maltophilia T3-c. The toluene degradation activity of S. maltophilia T3-c could be maintained at a broad pH range from 5 to 8. The rates at 20 and 40 degrees C were 43 and 83%, respectively, of the rate at 30 degrees C. The specific degradation rates of toluene, benzene, and ethylbenzene by strain T3-c were 2.38, 4.25, and 2.06 micromol/g-DCW/hr. While xylene could not be utilized as a growth substrate by S. maltophilia T3-c, the presence of toluene resulted in the cometabolic degradation of xylene. The specific degradation rate of toluene was increased by the presence of benzene, ethylbenzene, or xylene in binary mixtures. The presence of toluene or xylene in binary mixtures with benzene increased the specific degradation rate of benzene. The presence of ethylbenzene in binary mixtures with benzene inhibited benzene degradation. The presence of more than three kinds of substrates inhibited the specific degradation rate of benzene. All BTEX mixtures, except tri-mixtures of benzene, ethylbenzene, and xylene or mixtures of all four substrates, had little effect on the degradation of ethylbenzene by S. maltophilia T3-c. The utilization preference of the substrates by S. maltophilia T3-c was as follows: ethylbenzene was degraded fastest, followed by toluene and benzene. However, the specific degradation rates of substrates, in order, were benzene, toluene, and ethylbenzene.     

Development and performance of an alternative biofilter system

Step tracer tests were carried out on lab-scale biofilters to determine the residence time distributions (RTDs) of gases passing through two types of biofilters: a standard biofilter with vertical gas flow and a modified biofilter with horizontal gas flow. Results were used to define the flow patterns in the reactors. "Non-ideal flow" indicates that the flow reactors did not behave like either type of ideal reactor: the perfectly stirred reactor [often called a "continuously stirred tank reactor" (CSTR)] or the plug-flow reactor. The horizontal biofilter with back-mixing was able to accommodate a shorter residence time without the usual requirement of greater biofilter surface area for increased biofiltration efficiency. Experimental results indicated that the first bed of the modified biofilter behaved like two CSTRs in series, while the second bed may be represented by two or three CSTRs in series. Because of the flow baffles used in the horizontal biofilter system, its performance was more similar to completely mixed systems, and hence, it could not be modeled as a plug-flow reactor. For the standard biofilter, the number of CSTRs was found to be between 2 and 9 depending on the airflow rate. In terms of NH3 removal efficiency and elimination capacity, the standard biofilter was not as good as the modified system; moreover, the second bed of the modified biofilter exhibited greater removal efficiency than the first bed. The elimination rate increased as biofilter load increased. An opposite trend was exhibited with respect to removal efficiency.     

Simultaneous sorption of lead and chlorobenzene by organobentonite

Clays or organoclays have been used as a barrier to prevent the transport of hazardous contaminants in landfills. However, clays are known to effectively sorb mostly inorganic contaminants, while organoclays are mainly used for organic contaminants. Since the organoclays are basically clay particles modified with cationic surfactants, there might exist an optimal coverage of cationic surfactant on the clay particles to sorb both inorganic and organic contaminants. In order to determine the optimal mass of cationic surfactants on the bentonites, sodium bentonites were treated with various ratios of hexadecyltrimethylammonium (HDTMA) to bentonites. Chlorobenzene and lead were selected as representative contaminants. When either chlorobenzene or lead exists as a single contaminant, chlorobenzene sorption increased with increasing HDTMA to bentonite ratios, and lead sorption decreased with increasing HDTMA to bentonite ratios. Sorption of chlorobenzene was a function of HDTMA coverage on the bentonites, while lead sorption was much more influenced by the initial lead concentration rather than the mass of HDTMA added to the bentonites.     

Distribution and coassociations of trace elements in soft tissue and byssus of Mytilus galloprovincialis relative to the surrounding seawater and suspended matter of the southern part of the Korean Peninsula

The concentrations of Cd, Co, Cu, Cr, Fe, Hg, Mn, Ni, Pb, Sn, Ti and Zn were analyzed by AAS, ICP MS and AFS in soft tissues and byssal threads of Mytilus galloprovincialis from Masan Bay and Ulsan Bay, Korea. Spatial variations in metal concentrations were found. The levels of Cd, Pb, Hg, Cu, Zn, Co and Mn were very high in the mussels from Ulsan Bay (Sts. U1, U2) and comparable with elevated concentrations of these elements in Mytilus sp. reported to date for other geographical areas. Seasonal differences in some metal concentrations were also observed. These variations may be caused by factors such as: a large difference in seawater temperature, food supply for the mussel population and/or freshwater runoff of particulate metal to the coastal water and weight changes brought about by gonadal development and the release of sexual products. Pb, Cu, Zn, Co, Ni, Fe and Mn were more enriched in byssal threads than in the soft tissues, hence the byssus seems to be more sensitive in reflecting the availabilities of trace metals in the ambient waters. Concentrations of trace metals varied with respect to the size of mussels and season, depending on many factors like sexual development, and seawater temperature, etc. The levels of some trace metals in seawater, especially in suspended matter were correlated significantly with those in soft tissues and byssal threads. There were spatial variations in metal concentrations in the soft tissue and byssus attributed to different sources of trace elements located near the sampling sites. There were significant relationships between concentrations of some metals (Cd, Cu, Pb, and Zn) in mussel soft tissues and byssal threads and suspended matter. This suggests that M. galloprovincialis can be used as a sensitive biomonitor for the availabilities of trace elements in the coastal waters off Korea.     

Estrogenic effects of phenolic compounds on glucose-6-phosphate dehydrogenase in MCF-7 cells and uterine glutathione peroxidase in rats

In this study, we tested phenolic compounds such as bisphenol A (BPA), 4-nonylphenol (NP), 4-octylphenol (OP) and 4-propylphenol (PP) by using glucose-6-phosphate dehydrogenase (G6PD) in estrogen sensitive human breast cancer cells (MCF-7 cells) and glutathione peroxidase (GPx) in female immature Sprague-Dawley (SD) rats. This study was designed to investigate whether phenolic compounds have estrogenic effects in these useful screening methods for endocrine disruptors. We chose 6 h as the incubation period for the G6PD assay through a preliminary experiment using 17beta-estradiol (E2). Above the concentration of 1 x 10(-8) M, BPA significantly increased the G6PD activity in a concentration-dependent manner, relative to the control. NP (over the concentration of 1 x 10(-9) M) also enhanced the G6PD activity by about 1.8 times that of the control. OP produced weaker effects on G6PD than NP, and showed a tendency to increase the G6PD activity. PP did not affect the G6PD activity. These results show that BPA and NP have the effect of enhancing G6PD activities in MCF-7 cells. In the in vivo GPx assay, both BPA and E2 significantly increased the uterus wet weights and dramatically enhanced uterine GPx activities in immature female rats in a dose-dependent manner. Treatment with NP (500 mg/kg/day) increased significantly both the uterine GPx activity and the uterus wet weights in immature female rats. OP (500 mg/kg/day) also caused a significant increase in uterine GPx activity, but had no effect on the uterus wet weights. This finding indicates that the change in uterine GPx activities could be a more sensitive parameter than that of uterus wet weights in immature rats. This study implies that phenolic compounds have a weak estrogenic effects.     

Intercomparison of reactive transport models applied to UO2 oxidative dissolution and uranium migration

Oxidative dissolution of uranium dioxide (UO(2)) and the subsequent migration of uranium in a subsurface environment and an underground waste disposal have been simulated with reactive transport models. In these systems, hydrogeological and chemical processes are closely entangled and their interdependency has been analyzed in detail, notably with respect to redox reactions, kinetics of mineralogical evolution and hydrodynamic migration of species of interest. Different codes, where among CASTEM, CHEMTRAP and HYTEC, have been used as an intercomparison and verification exercise. Although the agreement between codes is satisfactory, it is shown that the discretization method of the transport equation (i.e. finite elements (FE) versus mixed-hybrid FE and finite differences) and the sequential coupling scheme may lead to systematic discrepancies.     

Use of O2 consumption and CO2 production in kinetic cells to delineate pyrite oxidation-carbonate buffering and microbial respiration in unsaturated media

Identifying zones of sulphide oxidation and carbonate buffering is important in the development of a management plan for mine waste-rock piles. In this study, we used a kinetic cell technique to measure rates of O2 consumption and CO2 production in low sulphide (<0.12 wt.% S), low inorganic carbon (<0.20 wt.% C(inorganic)), gneissic waste rock and associated organic-rich lake sediment (0.7 wt.% C(organic)), and forest soil (1.4 wt.% C(organic)) collected from the Key Lake uranium mine in Saskatchewan, Canada. Solid chemistry, stable carbon isotope, pore water sulphate concentration data, and stoichiometric considerations indicated that O2 consumption and CO2 production were constrained by microbial respiration in the lake sediment and forest soil and by pyrite oxidation-carbonate buffering in the gneissic waste rock. Mean ratios of molar CO2 production to O2 consumption rates were 0.5 for lake sediment, 0.7 for forest soil, and 0.2 for gneissic waste rock. The different O2/CO2 ratios suggested that O2-CO2 monitoring may provide a practical tool for identifying the zones of microbial respiration and pyrite oxidation-carbonate buffering in mine waste-rock piles. Rates of O2 consumption and CO2 production were about one order of magnitude greater in lake sediment than in gneissic waste rock, indicating that microbial respiration would exert a control on the distribution of O2 and CO2 gas in waste-rock piles constructed upon the dewatered lake sediments.