Reduced sulfur compounds in gas from construction and demolition debris landfills

The biological conversion of sulfate from disposed gypsum drywall to hydrogen sulfide (H(2)S) in the anaerobic environment of a landfill results in odor problems and possible health concerns at many disposal facilities. To examine the extent and magnitude of such emissions, landfill gas samples from wells, soil vapor samples from the interface of the waste and cover soil, and ambient air samples, were collected from 10 construction and demolition (C&D) debris landfills in Florida and analyzed for H(2)S and other reduced sulfur compounds (RSC). H(2)S was detected in the well gas and soil vapor at all 10 sites. The concentrations in the ambient air above the surface of the landfill were much lower than those observed in the soil vapor, and no direct correlation was observed between the two sampling locations. Methyl mercaptan and carbonyl sulfide were the most frequently observed other RSC, though they occurred at smaller concentrations than H(2)S. This research confirmed the presence of H(2)S at C&D debris landfills. High concentrations of H(2)S may be a concern for employees working on the landfill site. These results indicate that workers should use proper personal protection at C&D debris landfills when involved in excavation, landfill gas collection, or confined spaces. The results indicate that H(2)S is sufficiently diluted in the atmosphere to not commonly pose acute health impacts for these landfill workers in normal working conditions. H(2)S concentrations were extremely variable with measurements occurring over a very large range (from less than 3 ppbv to 12,000 ppmv in the soil vapor and from less than 3 ppbv to 50 ppmv in ambient air). Possible reasons for the large intra- and inter-site variability observed include waste and soil heterogeneities, impact of weather conditions, and different site management practices.     

Biota as toxic metal indicators

Metal in the environment arises from both natural sources and human activities. Toxic metals in air, soil, and water have become a global problem. They are potential hazards to aquatic, animal, and human life because of their toxicity, bioaccumulative, and non-biodegradable nature. The major impacts of metal pollutants can be stated as ecosystem contamination and health problems of exposed human populations. Those problems have been a cause of increasing public concern throughout the world. Some trace metals are used by living organisms to stabilize protein structures, facilitate electron transfer reactions, and catalyze enzymatic reactions. But even metals that are biologically essential can be harmful to living organisms at high levels of exposure. An increasing concentration of heavy metals in the environment can modify mineral and enzyme functions of human beings. During the last two decades, the interest in using bioindicators as monitoring tools to assess environmental pollution with toxic metals has increased. Bioindicators are flora and fauna members, which are collected and analyzed to measure the levels of metal contaminants. Bioindicators therefore identify health hazards. Various living organisms, such as microbes, fungi, plants, animals, and humans, are used to monitor toxic metals from air, water, sediment, soil, and food chain. Here, we review recent bioindicators, toxicity assessment, and ecological effects.     

Speciation study of lead and manganese in roadside dusts from major roads in Ile-Ife,South Western Nigeria

A speciation study of Pb and Mn in roadside dust along major roads in Ile-Ife, South Western Nigeria, was investigated. Pb and Mn values obtained by total digestion ranged from 22.23 ± 3.52 to 43.48 ± 3.05 μg/g and 35.93±0.15 to 83.76 ± 0.06 μg/g, respectively. The results of speciation analysis of Pb and Mn in the samples showed that the mean levels of these metals in the various fractions followed the order: organic matter>residual>Fe-Mn>carbonate>exchangeable and organic matter-bound>exchangeable>carbonate-bound>residual>Fe-Mn oxide-bound respectively. The speciation study therefore revealed that most of the Pb and Mn were associated with the organic matter fraction and that they were least available in the exchangeable and Fe-Mn oxide fractions, respectively. The apparent mobility and potential bioavailability for these metals in the road dust was Mn>Pb. There is a significant difference between the means of Pb and Mn in the road dust of the study area at p≤0.05, which strongly suggests that they may not have come from the same source; different sources may be responsible, which may be anthropogenic, such as tyre wear, vehicular emission, brake linings and natural.     

Displacement and sweep efficiencies in a DNAPL recovery test using micellar and polymer solutions injected in a five-spot pattern

Soil washing with micellar solutions is a promising alternative for the remediation of DNAPL source zones. As with any flushing technology, the success of soil washing with micellar solutions depends in a very large part on the ability of the solution to contact the contaminant (sweep efficiency) and then on the efficiency of contaminant removal once this contact is made (displacement efficiency). We report here on a field test where a micellar solution was used to recover a DNAPL in an open five-spot pattern in which polymer solutions were also injected before and after the washing solution to improve sweep efficiency. The washing solution formulation was optimised in the laboratory prior to the test to obtain good dissolution capacity. For a high-concentration and low-volume soil flushing remediation test such as the one performed (0.8 pore volumes of actual washing solution injected), slug sizing of the washing solution is critical. It was evaluated by an analytical solution. In a five-spot pattern, the displacement efficiency of the washing solution was observed to vary in the porous medium as a function of the radial distance from the injection well because: (1) the volume of the washing solution flowing through a section of the test cell changes (maximum close to the injection well and minimal at the pumping wells); (2) the in situ velocity changes (maximum at the wells and minimum between the wells) and; (3) the contact time of the washing solution with the NAPL changes as a function of the distance from the injection well. The relative importance of the recovery mechanisms, mobilisation and dissolution, was also observed to vary in the test cell. The reduced velocity increased the contact time of the washing solution with the DNAPL enhancing its dissolution, but the decrease of the capillary number caused less mobilisation. The washing process is much more extensive around the injection well. The use of an injection-pumping pattern allowing a complete sweep of the remediated area is essential. Following a comprehensive characterisation, modeling is an efficient tool to design the injection-pumping scheme and to optimise injection and pumping rates providing the best areal sweep. The vertical sweep can be controlled by using a polymer solution (Xanthan gum). The polymer solution also has a positive effect on front stability between the solutions injected. The injection rate of the polymer solution that follows the washing solution must be kept minimal initially to prevent dilution of the washing solution by fingering.     

Application of a Physical Input–Output Table to Evaluate the Development and Sustainability of Continental Water Resources in Spain

Continental waters are complex resources in terms of a measurable physical quantity, and measuring them requires a good knowledge of total water availability. In this research, an accounting physical input–output table (PIOT) was applied to evaluate total water resources and gross annual availabilities at each stage of the natural-artificial water cycle. These stages are considered subsystems of a continental water resource system describing water transfers for an average year within 13 administrative basins of Spain. Water transfers between various subsystems are characterized by internal flows decreasing the water resource availabilities. The PIOT analysis establishes these internal flows, and the origins and final uses of the total resources for each subsystem. The input-output balance registered an unsustainable negative net accumulation in eight water basins. The PIOT analysis also allowed the calculation of significant indicators such as water resource developments (RDI) and their sustainable use (SUI). RDI and SUI demonstrate that groundwater is a critical resource affecting the environment (e.g., wetlands in the upper Guadiana) and the water supply (e.g., irrigation in the Segura basin). The results of this model suggest that above-/below-ground hydrological links are important when decisions have to be made in order to provide a satisfactory supply of water in Spain. The model integrates the different water basins under territorial criteria, and therefore it may be useful for the Spanish National Hydrological Plan.     

Use of organic coagulant/flocculant for treatment of effluents generated in intensive rearing of swine

Separation of water for reuse is essential in an effluent treatment system, especially in activities with high water consumption, such as a pig production system. The objective of this work was to evaluate the efficiency of Tanfloc SG^® coagulant tannin/organic flocculant used to treat effluent generated during the intensive rearing of swine. For the evaluation, laboratory and in situ tests (field test) were performed. The laboratory tests were performed to define the concentration (1 and 16%), dosage (0, 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 2.0, 4.0, 8.0, and 16.0 milliliters of the solution), and time (24, 48, 72, and 96 hours) of coagulation/flocculation treatment of the solid portion of the effluent. The parameters pH, turbidity, oxidation reduction potential, dissolved oxygen, and electroconductivity (in microsiemens per centimeter) were evaluated using a multiparameter probe and the parameters ammonia (NH₃), nitrate (NO₃), and nitrite (NO₂) in the laboratory, in relation to the coagulation/flocculation time of the solid part of the effluent. The use of tannin as a coagulant/flocculant of plant origin in the treatment of swine effluents was effective in reducing turbidity and concentrations of ammonia, nitrite, and nitrate, and it allowed separation of the solid–liquid phase in approximately 68% as liquid phase.     

A PARTICIPATORY APPROACH TO WATERSHED MANAGEMENT: THE BRAZILIAN SYSTEM1

ABSTRACT: Brazil is currently facing the challenge of implementing a new water resources management system to promote the rational and sustainable use of the country's waters. This system is based on the following principles of water management: (2) stakeholders' participation; (2) the watershed as the planning and management unit; and (3) the economic value of water. Stakeholders' participation and the involvement of civil society in the decision making process is guaranteed by permanent seats in the watersheds' management committees. These committees are the highest decision level for the establishment of water policy and for planning its use. The executive branch of the committees is the watershed agency or the water agency. This paper presents the recently approved Brazilian water resources management system and discusses the participatory approach followed to validate and to ensure prompt response to decisions regarding water use by all stakeholders. The formulation of the National Water Law (January/1998) was also supported by extensive consultation with civil society, professional associations, state and municipal governments as well as with federal governmental agencies and private sector organizations. It also presents an overview of the formulation of the National Water Law. Finally, as watershed committees have been created and are already operating in a limited number of watersheds, some of the major obstacles to the success of the new system are discussed along with alternatives for overcoming such obstacles.     

A participatory decision making framework for artisanal fisheries collaborative governance: Insights from management committees in Chile

Fisheries management is increasingly transitioning towards collaborative governance. Collaborative systems depend on stakeholders’ capacity to design and implement legitimate and scientifically robust management plans within collective action arenas. Here we propose that collaborative governance outcomes, in fisheries management, will benefit from using structured participatory decision making frameworks that enhance deliberative thinking among stakeholders. We tested our approach in the artisanal fishery of Chile, an important producer of marine resources. Recently in 2013, Chile made important changes to fisheries policies by creating multi-sectorial management committees to manage de facto open access fishing areas. We applied a structured decision making framework to inform the restructuring of a management plan within a committee. As a result, we identified goals,objectives and indicators, including social, economic, biological and ecological dimensions; we explored tradeoffs, assessing the relative importance of the objectives; finally, we created scenarios and prioritized alternatives, reflecting on the interplay between self-regulation and government control. Members of the management committee were able to rationalize the different steps of the framework and identify ways forward which highlighted the importance of self-regulation in comparison to central authorities’ control. We concluded that structured decision making promotes spaces for rational analysis of alternatives costs and benefits. Promoting deliberative thinking in fisheries management can improve equity, legitimacy and sustainability of collaborative governance.     

Sonographic diagnosis of fetal congenital cataracts

Five fetuses with congenital cataracts diagnosed in utero by ultrasound are reported. The fetuses, who were between 14 and 27 weeks' gestation, also had other severe malformations. The sonographic features of the cataracts are presented.