Alternative amendment for soluble phosphorus removal from poultry litter

Background, aim, and scope  

Alum (aluminum sulfate) is the currently preferred chemical amendment for phosphorus (P) treatment in poultry litter (PL). Aluminum-based drinking-water treatment residuals (Al-WTRs) are the waste by-product of the drinking-water treatment process and have been effectively used to remove P from aqueous solutions, but their effectiveness in PL water extracts has not been studied in detail. Elevated cost associated with alum could be minimized by using the equally effective WTRs to remove soluble P from PL, and they can be obtained at a minimal cost from drinking-water treatment plants.     

Chitosan-polypropylene imine dendrimer hybrid: a new ecological biomordant for cochineal dyeing of wool

The classical use of synthetic dyes is causing issues of environmental pollution and heath risk. As a consequence natural dyes are gaining interest, but the use of natural dyes still includes toxic reagents such as metals as mordants and acids to enhance color and yield. Therefore, we designed a new chitosan-polypropylene imine dendrimer hybrid at 0–2000 mg/L to treat wool before dyeing with cochineal. We compared dye exhaustion, color depth, color characteristics, and color fastness of the new process with dyed pristine and metal mordanted wool. Results show that wool pretreatment improved dye exhaustion from 48 to 88 %, shifted saturation point toward lower dye concentration from 3000 to 1000 mg/L, and improved color depth from 13.68 for pristine wool and 15.17 for metal mordanted wool to 23.89 for the new process.     

International Environmental Agreements: Design of Optimal Transfers Under Heterogeneity

International environmental agreements (IEAs) can coordinate abatement of transboundary pollutants. This paper investigates how heterogeneous countries facing a stock pollutant might structure such an agreement. In particular, we examine how an IEA might be implemented with a set of monetary transfers. The focus is on transfers that are time invariant, linear in emissions, and consistent with budget balance. There is a range of such schemes that would induce efficient emissions. We provide a simple and intuitive characterization of these penalties and describe how specific proposals might be chosen in order to facilitate compliance and implementation. Our proposals are illustrated with a simple example. We show that heterogeneity reduces the scope for penalty schemes to jointly satisfy desirable properties.     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

Triterpene saponin hemi-biosynthesis of a leaf beetle’s (<Emphasis Type="Italic">Platyphora kollari</Emphasis>) defensive secretion

The adults of the leaf beetle Platyphora kollari (Chrysomelidae) are able to metabolise the oleanane triterpene β-amyrin (1) into the glycoside 3-O-β-d-glucopyranosyl-(1→4)-β-d-glucuronopyranosyl-hederagenin (2) that is stored in their defensive glands. The aim of this study was to test the hypothesis that oleanolic acid (3) is an intermediate in the conversion of 1 into 2 and to check whether the sequestration of pentacyclic triterpenes is selective in favour of β-amyrin (1). To this end, adults of P. kollari were fed with Ipomoea batatas leaf disks painted with a solution of [2,2,3-²H₃]oleanolic acid or [2,2,3-²H₃]α-amyrin and the secretion of their defensive glands analysed by HPLC–ESIMS. The data presented in this work indicated that the first step of the transformation of β-amyrin (1) into the sequestered glycoside 2 is its oxidation into oleanolic acid (3) and that this conversion is selective but not specific in favour of β-amyrin (1).     

Establishment of facultative sexuals

The existence of sex is one of the major unsolved problems in biology. We use computer simulations to model conditions in which sex may first become established. We develop an individual-based population model and show that a hypothetical facultative sex gene can fix, provided that the initial cost is low. It is demonstrated that the equilibrium fitness in the population increases with increasing population size and decreasing mutation rate. The probability of the establishment of the sex gene is found not to be directly related to the fitness difference between the asexual and sexual populations. This change in fitness on changing the parameters of the model is investigated.     

Health implications of radon distribution in living rooms and bedrooms in U.K. dwellings--a case study in Northamptonshire

Environmental radon exposure of residents of domestic premises in the United Kingdom (UK) and elsewhere in Europe is estimated on the basis of the measured radon concentrations in, and the relative occupancies of, the principal living room and bedroom. While studies on radon concentration variability in the individual units in apartment blocks in various countries have been described, little data has been reported on variability in two-storey single-family dwellings, and the majority of extant studies consolidate living room and bedroom data early in the analysis. To investigate this further, detailed analysis was made of radon concentration data from a set of thirty-four homes situated in areas of Northamptonshire known to exhibit high radon levels. All homes were of typical UK construction of brick/block/stone walls under a pitched tile/slate roof. Approximately 50% of the sample were detached houses, the remainder being semi-detached (duplex) or terraced (row-house). Around 25% of the sample possessed cellars, while 12% were single-storey dwellings (bungalows), reflecting the typical incidence of this type of dwelling in England. In the two-storey homes, all monitored bedrooms were on the upper floor. Distribution of the ratios of bedroom/living room radon concentrations (BR/LR ratio) in individual properties was left-skewed (mean 0.67, median 0.73, range 0.05-1.05) with a tail extending to just above 1.0. The mean is consistent with the outcome of earlier extensive studies in England, while the variability depends principally on the characteristics of the property, and not on seasonal factors. In a small set of homes, the BR/LR ratio was anomalously low, (mean 0.3). BR/LR ratios in single-storey homes clustered around a value of 1.0, indicating that house design, rather than lifestyle, is the dominant factor in determining bedroom radon concentrations. Homes with higher mean annual radon concentrations showed lower BR/LR ratios, supporting our proposal that, in some homes, radon emanation from building materials may comprise a significant component of the overall radon level.     

On the radiocesium carbonate barrier in organics-rich sediments of Lake Juodis, Lithuania

Radiocesium vertical profiles in organics-rich sediments of running shallow eutrophic Lake Juodis (Lithuania) were studied in relation to seasonal variations of vertical profiles (in water column and sediments) of standard variables (pH, redox potential, temperature, oxygen concentrations, conductivity). It is shown that the sedimentation rate, radiocesium mobility and its vertical profiles in sediments are controlled by the vital cycle (processes of the growth, accumulation and decomposition) of green algae covering the main bottom areas of the lake. It is also shown that calcite deposits are formed in the shallow bottom areas that are oxygenated throughout the year because of the photosynthetic activity of the green algae covering the sediment. Formation of the calcite coatings on freshly accumulated organics is remarkable for causing elevated densities of sediment solids in the upper part of the respective vertical profiles. These calcite deposits behave as a barrier for radiocesium backward flux to the bottom water making the respective bottom areas a radionuclide sink. Together with the jelly-structured sediments lying below these deposits, the calcite preserves the shape of the primary radiocesium vertical profiles formed due to free-ion diffusion after the deposition event. It was determined that bottom areas anaerobic in winter are the main radiocesium source in the water column and cause characteristic radiocesium redistribution in surface sediments.     

The transfer of 137Cs and 90Sr from feed to rabbits

Radiological assessment of the impact of nuclear weapons testing on the local population in the Semipalatinsk Test Site (STS) requires comprehensive site-specific information on radionuclide behaviour in the environment. However, information on radionuclide behaviour in the conditions of the STS is rather sparse and, in particular, there are no data in the literature on parameters of radionuclide transfer from feed to rabbit products which have been identified as contributors to internal dose to the inhabitants. The transfer of (137)Cs and (90)Sr to rabbit meat was studied under laboratory conditions in a controlled experiment with 32 locally bred rabbits maintained in the Kazakh Agricultural Research Institute. The equilibrium transfer coefficients for (137)Cs and (90)Sr from feed to rabbit meat were estimated to be 0.4 d kg(-1) and 0.15 d kg(-1), respectively. The biological half-lives were estimated to be 0.1 d for (137)Cs and 0.14 d for (90)Sr. Whereas for (137)Cs the distribution in the body is relatively homogeneous, there are large differences between the organs and tissues for (90)Sr for which, as expected, the highest concentrations were found in bone.     

The transfer of 239/240Pu to cow milk

In summer 1993 we measured the transfer of (239/240)Pu to milk from herbage from a pasture located 5 km from the Chernobyl nuclear power plant. In one treatment cows were allowed to graze freely on the pasture. In a second treatment, cows were fed herbage collected from the pasture in stalls. The milk transfer coefficient; F(m) did not vary significantly between treatments and the mean value of 7.5x10(-6)d l(-1) was higher than previously reported values. Despite many values of F(m) for Pu in the literature we identified few relevant original data sets. Transfer coefficient values for Pu are only appropriate when used in conjunction with a specified time period or an appropriate model which allows for the biological half-life. We recommend for screening purposes an F(m) value of 1x10(-5)d l(-1) for Pu, with an order of magnitude lower value being appropriate for cows which are only exposed for one grazing season.