Polyurethane for removal of organic dyes from textile wastewater

Synthetic organic dyes are extensively used in consumer products from textile to pharmaceuticals. A large amount of organic dyes is ultimately discharged as effluent into water bodies, thus posing a serious threat to environment and life. Therefore, removal of dyes from water bodies is needed. To address this problem, various synthetic and natural materials have been used to adsorb dyes. Here, we review the application of polyurethane for removal of organic dyes. First, we review the application of simple and modified polyurethane as efficient and economic adsorbents for dyes. Secondly, we review the polyurethane-based membranes for separation and adsorption of various dyes. Thirdly, we describe polyurethane composites with improved efficiency of dyes removal. Finally, we review the bioremediation of dyes where polyurethane has been proven as an excellent inert support.     

Aboveground biomass and carbon stock are related with soil humidity in a mangrove at the Piraquê-Açu River,Southeastern Brazil

In Brazil, few studies have been conducted about the assimilation of carbon and biomass accumulation in mangroves despite its great role as a carbon sink. In this sense, this study aimed to estimate the aboveground biomass (AGB) and carbon stocked by mangrove species in a stretch along the Piraquê-Açu River in southeastern Brazil, and to verify their relation with some soil parameters. For such, the height and diameter of all trees inside six plots of 100 m² were measured and used to quantify AGB through an allometric equation, and soil samples were collected to calculate granulometry, humidity, time of infiltration and permeability. Multiple regressions were used to identify relations between AGB and soil parameters. A total of 296 trees were found in the area and the AGB and carbon assimilated were 2.92 t ha^?1 and 1.46 t ha^?1, respectively. Laguncularia racemosa was the most abundant species and contributed with 61% of these values. Only a positive relation between AGB/carbon of L. racemosa and soil humidity was found, probably due to the substrate characteristics which contain a large concentration of silt/clay, and may store more water and do not yet provide firmness to the roots. By comparison, this mangrove had a low amount of AGB and carbon stocked and has yet to develop structurally. Along with other ecological functions and its associated ecosystem services such as supplying food for the local community, these features highlight the importance to conserve the studied mangrove and the interlinked coastal ecosystems.     

Spatiotemporal changes and fragmentation of mangroves and its effects on fish diversity in Ca Mau Province (Vietnam)

Mangroves are important economically and ecologically, however mangrove cover has declined dramatically leading to habitat fragmentation and biodiversity loss. Information on mangrove cover change, fragmentation and impacts on fish diversity is poorly understood. The aims of this study are to detect spatiotemporal changes and mangrove status, examine fragmentation changes and associated effects on fish diversity. Landsat images in1989, 2000, and 2013 were used to classify mangrove cover in Ca Mau Province (Vietnam) and validated against high resolution Pleiades imagery. Fragmentation changes in mangrove cover were examined using series of landscape metrics evaluated against fish diversity indices (Simpson’s index, Jaccard’s coefficient and relative abundance). Results show that mangrove cover has declined 24.6% in the province. Currently, high and moderately dense mangroves distribute in southern half of the region while the low density mangroves occurs in the northern half. Over the 24 year study periods, the number of patches and edge density has increased 58% and 53.9%, respectively, while the mean patch size and mean patch edge has decreased 52.3% and 26.6%. Fish diversity in the more highly fragmented mangrove area was 1.78 times lower than the less fragmented mangrove. The study illustrates the applicability of using Landsat satellite imagery for use in mangrove fragmentation studies as well as the impact of fragmentation.     

The fungicide difenoconazole alters mRNA expression levels of human CYP3A4 in HepG2 cells

The fungicide difenoconazole has been frequently detected in agricultural products, soils and surface waters, causing increasingly public concern due to toxicological properties. Although systemic triazole fungicides can inhibit the enzymatic activity of many CYP450 isozymes, how difenoconazole affects the human CYP3A4 still remains largely unknown. We thus investigated the effect of difenoconazole on normal mRNA expression and protein expression of human CYP3A4 by real-time quantitative PCR and western blot, respectively. Results show that the exposure to difenoconazole from 0.01 to 0.5 μM for 24 h down-regulates mRNA expression levels of human CYP3A4 in HepG2 cells. We also found that difenoconazole could inhibit the enzymatic activity of human CYP3A4 in a concentration-dependent mode. The IC₅₀ of difenoconazole for inhibition of CYP3A4 activity is 0.41 µM, showing a stronger inhibitor in comparison with ketoconazole. Overall, our findings indicate the potential risk of difenoconazole for the disruption of human CYP3A4.     

H and O isotopic differences in typhon and urban-induced heavy rain in Tokyo

Stable isotope ratios of hydrogen and oxygen of water are useful tracers of the hydrological cycle. For example, isotopes monitor the evapotranspiration in vegetated areas, local snow ice processes and stream water flow processes. δ¹⁸O and δD in rainwater reflect the processes of evaporation, condensation and precipitation. Heavy rains thus modify the stable isotope ratio of ground water, stream water and transpiration water vapor. However, the controlling factors of δ¹⁸O and δD are not clear. Here we analyzed the inorganic ion concentration and stable isotope ratio in 38 normal rainwater and 15 heavy rainwater samples were collected in Shinjuku, Tokyo, Japan, during four years from October 2012 to December 2015. Results show a decrease in δ¹⁸O and δD values with the total rainfall amount, thus highlighting the amount effect. δ¹⁸O and δD volume-weighted mean values in typhoon heavy rain were higher than the values estimated from amount effect, whereas δ¹⁸O and δD volume-weighted mean values in urban-induced heavy rain were lower. Typhoon heavy rain has high Na⁺ ratio and stable isotope ratios, while urban-induced heavy rain has low Na⁺ ratio and stable isotope ratio.     

Copper recovery from waste printed circuit boards concentrated metal scraps by electrolysis

Copper recovery is the core of waste printed circuit boards (WPCBs) treatment. In this study, we proposed a feasible and efficient way to recover copper from WPCBs concentrated metal scraps by direct electrolysis and factors that affect copper recovery rate and purity, mainly CuSO₄·5H₂O concentration, NaCl concentration, H₂SO₄ concentration and current density, were discussed in detail. The results indicated that copper recovery rate increased first with the increase of CuSO₄·5H₂O, NaCl, H₂SO₄ and current density and then decreased with further increasing these conditions. NaCl, H₂SO₄ and current density also showed a similar impact on copper purity, which also increased first and then decreased. Copper purity increased with the increase of CuSO₄·5H₂O. When the concentration of CuSO₄·5H₂O, NaCl and H₂SO₄ was respectively 90, 40 and 118 g/L and current density was 80 mA/cm², copper recovery rate and purity was up to 97.32% and 99.86%, respectively. Thus, electrolysis proposes a feasible and prospective approach for waste printed circuit boards recycle, even for e-waste, though more researches are needed for industrial application.

Open image in new window

     

Recycling polymeric waste from electronic and automotive sectors into value added products

The environmentally sustainable disposal and recycling of ever increasing volumes of electronic waste has become a global waste management issue. The addition of up to 25% polymeric waste PCBs (printed circuit boards) as fillers in polypropylene (PP) composites was partially successful: while the tensile modulus, flexural strength and flexural modulus of composites were enhanced, the tensile and impact strengths were found to decrease. As a lowering of impact strength can significantly limit the application of PP based composites, it is necessary to incorporate impact modifying polymers such as rubbery particles in the mix. We report on a novel investigation on the simultaneous utilization of electronic and automotive rubber waste as fillers in PP composites. These composites were prepared by using 25 wt.% polymeric PCB powder, up to 9% of ethylene propylene rubber (EPR), and PP: balance. The influence of EPR on the structural, thermal, mechanical and rheological properties of PP/PCB/ EPR composites was investigated. While the addition of EPR caused the nucleation of the β crystalline phase of PP, the onset temperature for thermal degradation was found to decrease by 8%. The tensile modulus and strength decreased by 16% and 19%, respectively; and the elongation at break increased by ~71%. The impact strength showed a maximum increase of ~18% at 7 wt.%–9 wt.% EPR content. Various rheological properties were found to be well within the range of processing limits. This novel eco-friendly approach could help utilize significant amounts of polymeric electronic and automotive waste for fabricating valuable polymer composites.

Open image in new window

     

Assessment of leaching behavior and human bioaccessibility of rare earth elements in typical hospital waste incineration ash in China

Leaching behavior and gastrointestinal bioaccessibility of rare earth elements (REEs) from hospital waste incineration (HWI) fly and bottom ash samples collected from Beijing and Nanjing Cities were assessed. In the same ash sample, the leaching concentrations of individual REEs determined by the Toxicity Characteristic Leaching Procedure (TCLP) were higher than those detected by the European standard protocol (EN-type test), thereby suggesting that the low pH value of leaching solution was an important factor influencing the leachability of REE. The REE bioaccessibility results, which were evaluated using the physiologically based extraction test (PBET), indicated that REEs were highly absorbed during gastric phase by dissolution; and subsequently precipitated and/or re-adsorbed in small intestinal phase. The relative amounts of the total REEs extracted by the TCLP method, EN-type test and PBET test were compared. In addition to the pH value of extraction solutions, the chelating role of REEs with organic ligands used in the PBET method was also an important parameter affecting REE adsorption in human body. Additionally, this study showed that REEs were extracted by these methods as concomitants of heavy metals and anions (NO₃ ^–, F^–, SO₄ ^2–, and Cl^–) from HWI ash, which probably caused the remarkably complex toxicity on human body by the exposure pathway.

Open image in new window

     

Performance evaluation of circulating fluidized bed incineration of municipal solid waste by multivariate outlier detection in China

This first nationwide survey was conducted to evaluate the overall performance of the circulating fluidized bed (CFB) incineration of municipal solid waste (MSW) in 2014-2015 in China. Total 23 CFB incineration power plants were evaluated. The data for monthly average flue gas emission of particles, CO, NO _x , SO₂ and HCl were collected over 12 consecutive months. The data were analyzed to assess the overall performance of CFB incineration by applying the Mahalanobis distance as a multivariate outlier detection method. Although the flue gas emission parameters had met the Chinese national emission standards, there were 11 total outliers (abnormal behavior) detected in 6 out of 23 CFB incineration power plants from the perspective of the MSWincineration performance. The results demonstrate that it is more important for a better performance of CFBs to reduce the frequencies of the MSW load changes, rather than the magnitudes of the MSW load changes, particularly reducing the frequencies in the range of 10% and more of the load changes, under the same and stable conditions. Furthermore, the overloading occurs more often than the underloading during the operation of the CFB incineration power plants in China. The frequent overloading is 0% to 30% of the designed capacity. To achieve the stable performance of CFBs in practice, an appropriately designed MSW storage capacity is suggested to build in a plant to buffer and reduce the frequency of the load changes.

Open image in new window

     

Comparison of different algicides on growth of <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis> and microcystin release,as well as its removal pathway in riverways

Eutrophication with a large number of Microcystis aeruginosa commonly occurs worldwide, thereby threatening the aquatic ecosystem and human health. In this study, four kinds of algicides were tested to explore their influence on cell density and chlorophyll-a of M. aeruginosa. Results showed that aluminum silicate agent, which inhibited more than 90% cell growth compared with the control group, demonstrated the strongest inhibition effect immediately on M. aeruginosa growth. Furthermore, the production and release of microcystin (MC)-LR were investigated. Aluminum silicate, CuSO₄, and Emma-11 were more effective than pyrogallic acid in disrupting the cells of M. aeruginosa, thereby increasing the extracellular MC-LR concentration. Aluminum silicate caused the highest extracellular MC-LR concentration of more than 45 mg·L^–1. Biotoxicity was also detected to evaluate the environmental risks of MC-LR release, which were related to the usages of different algicides. Extracellular MC-LR concentration mostly increased when the biotoxicity of algae solution increased. The experiments were also designed to reveal the effects of physical conditions in riverways, such as natural sunlight, aeration and benthal sludge, on MC-LR degradation. These findings indicated that UV rays in sunlight, which can achieve a MC-LR removal efficiency of more than 15%, played an important role in MC-LR degradation. Among all the physical pathways of MC-LR removal, benthal sludge adsorption presented the optimal efficiency at 20%.

Open image in new window