Acid Blue 25 adsorption on base treated Shorea dasyphylla sawdust: Kinetic, isotherm, thermodynamic and spectroscopic analysis

The potential of base treated Shorea dasyphylla (BTSD) sawdust for Acid Blue 25 (AB 25) adsorption was investigated in a batch adsorption process. Various physiochemical parameters such as pH, stirring rate, dosage, concentration, contact time and temperature were studied. The adsorbent was characterized with Fourier transform infrared spectrophotometer, scanning electron microscope and Brunauer, Emmett and Teller analysis. The optimum conditions for AB 25 adsorption were pH 2, stirring rate 500 r/min, adsorbent dosage 0.10 g and contact time 60 min. The pseudo second-order model showed the best conformity to the kinetic data. The equilibrium adsorption of AB 25 was described by Freundlich and Langmuir, with the latter found to agree well with the isotherm model. The maximum monolayer adsorption capacity of BTSD was 24.39 mg/g at 300 K, estimated from the Langmuir model. Thermodynamic parameters such as Gibbs free energy, enthalpy and entropy were determined. It was found that AB 25 adsorption was spontaneous and exothermic.     

Human health risk from organ-specific accumulation of toxic metals and response of antioxidants in edible fish species from Chenab River,Pakistan

In the current study, the bioaccumulation of essential and nonessential metals and related antioxidant activity were analyzed in three organs (muscle, gills, and liver) of herbivorous (HF) and carnivorous (CF) edible fish of Chenab River. The comparative analysis revealed a more heterogeneous accumulation of metals in the muscles of HF fish than that of CF fish [chromium (Cr, 3.4 μg g^?1), cobalt (Co, 1.7 μg g^?1), copper (Cu, 3 μg g^?1), and iron (Fe, 45 μg g^?1) versus Cr (1.3 μg g^?1), Co (0.1 μg g^?1), Cu (1.1 μg g^?1), and Fe (33 μg g^?1), respectively, P?<?0.001]. These results implied an organ-specific accumulation of metals at different trophic levels. According to logistic regression analysis, the bioaccumulation of metals had marked differences in HF and CF. The antioxidant activity was significantly related to the tissue type and the metals to which the organs are exposed to. The liver of CF fish had a higher activity of antioxidant superoxide dismutase (SOD), catalase (CAT), glutathione (GSH), and lipid peroxidase (LPO) than that of HF (P?<?0.05). LPO and guaiacol peroxidase (POD) in both groups were associated with a number of metals, but in HF, cadmium (Cd), Cr, Pb, and Zn were more related with the LPO and SOD activities. Moreover, Cd, Co, Fe, Pb, Ni, Cu, and Zn were above the permissible limits set by various agencies. In numerous cases, our results were even higher than those previously reported in the literature. The results provide an insight into the pollution pattern of Chenab River. These results may be helpful in the future to identify biomarkers of exposure in aquatic organisms.

Screening pesticides for their ability to damage bacterial DNA

Abstract

Twenty‐six pesticides and pesticide degradation products were screened (125 μg ‐ 2000 μg) for their ability to induce unrepairable damage to bacterial DNA. Three repair test systems were utilized in this study, the Salmonella typhimurium (TA1538/TA1978), the E. coli K‐12 (Pol A₁ ⁺/Pol^‐ ₁) and the E. coli WP₂ (WP₂, WP₂ uvrA, WP67, CM611 and CM571). Aldicarb (1000 μg), benomyl (250 μg), 2‐aminobenzimidazole (2000 μg), captan (125 μg), fenazalor (500 μg), 5,6‐dichloro‐2‐trifluoromethylbenzimida‐zole (NC‐2983) (250 μg), isothymol (250 μg), maleic hydrazide(1000 μg), pentachloronitrobenzene (1000 μg) were DNA‐damaglng to one or more bacterial test systems. Isothymol and NC‐2983 affected all three test systems. Chlorinated hydrocarbon insec ticides, some being recognized as carcinogens, did not: produce a zone of inhibition in any of the tester strains possibly due to their poor solubility and diffusion in the agar overlay. It was concluded that these tests can be performed along with bacterial reversion tests to complement each other as short‐term screening tests for potential carcinogens and mutagens.     

Effect of different design aspects of pipe for earth air tunnel heat exchanger system: A state of art

Earth air tunnel heat exchanger (EATHE) is a promising passive technique to provide thermal comfort condition in buildings. EATHE system uses undisturbed temperature of the ground for heating/cooling of air. Despite the several advantages, this technique has not become much popular owing to its high capital cost (mainly pipe cost and trench excavation cost) and large land area requirements. The primary objective of this study is to present a comprehensive review of different EATHE pipe layouts, pipe properties and positioning of the pipe with their advantages and limitations. It is observed that the ring pipe layout is the most cost-effective pipe-layout for small size EATHE system because it saves excavation cost by using a trench of the existing foundation of the building. However, Grid pipe-layout is an ideal layout for a large size EATHE system. Multi-layer pipe layouts should be used to reduce the land area requirement significantly. Moreover, EATHE system can be installed beneath the building (under building foot-print) to eliminate extra land area requirement for the installation of EATHE system. This review article shows that the Initial capital cost and land area requirement for the EATHE system can be substantially reduced by using appropriate pipe layout. It can be concluded that if EATHE system is installed with proper design strategies, it will be a clean and cost-effective method for building heating/cooling with significant power savings.     

Newly developed Fe3O4–Cr2O3 magnetic nanocomposite for photocatalytic decomposition of 4-chlorophenol in water

Chlorophenols, typically 4-chlorophenols are highly toxic and non-biodegradable organic contaminants which pose serious threat to the environment, particularly when released into aqueous medium. The removal of these pollutants by efficient method has received worldwide concern in recent past. A new Fe_3O_4–Cr_2O_3 magnetic nanocomposite was synthesized by wet chemical method under ultrasonic irradiation. Microstructure and morphology of the nanocomposite were characterized by powder X-ray diffraction(XRD),Fourier transform infrared(FT-IR), and a transmission electron microscope(TEM). Magnetic and optical properties were studied by a vibrating sample magnetometer(VSM) and an ultraviolet–visible(UV–Vis) spectrophotometer respectively. The magnetic nanocomposite(MNC) was used as photocatalyst for effective decomposition of 4-chlorophenol in water under ultraviolet(UV) irradiation.     

Investigation of impact of environmental changes on precipitation pattern of Pakistan

In this paper, variability in precipitation pattern of Pakistan due to environmental and climatic changes has been studied. Maps have been generated to depict global precipitation variation. Precipitation data of 25 stations of Pakistan have been used. These data were taken from Meteorological Department, Islamabad, Pakistan. The results of two global climate models, namely Australia’s Commonwealth Scientific and Industrial Research’s third generation general circulation model and National Center for Atmospheric Research’s first generation precipitation circulation model for A2 scenario have been applied to investigate the changes. It is observed that precipitation pattern will change significantly in the future. The occurrence of precipitation in all seasons for Pakistan is expected to increase with almost uniform distribution across a season. Average annual precipitation of the country will undergo an increase in the range of +57 to +71 % as compared to average of the base period.     

Studies on Rhizospheric Mycoflora of Tea (Camellia sinensis):In vitro Antagonism with Dominant Bacteria

The rhizospheres of established tea bushes have some specificcharacteristics which are associated with the long lived nature of teaplants,viz.,negative rhizospheric effect,lowering of soil pH,antagonistic activities among microbial communities and dominan…     

Water-soluble species and heavy metal contamination of the petroleum refinary area,Jordan

The levels of lead, cadmium, copper, zinc, aluminum, chromium, and iron in street dust, soil, and plants in the Jordanian petroleum refinery were determined using flame and graphite-furnace atomic absorption spectrophotometry. Major cations (Li+, Na+, NH4+, K+, Mg2+, and Ca2+) and anions (F-, Cl-, NO3-, SO4(2-), and Br-) were also determined using suppression mode ion chromatography. Generally, higher levels of the heavy metals studied were found in street dust samples than in soil samples. On the other hand, except Cl-, and Li+ ions, other anions and cations showed higher concentrations in soil than in street dust samples. For plant samples, unwashed samples showed higher levels of heavy metals than their washed counterparts, indicating that dust fall is a source of heavy metal contamination.