Determination of elemental carbon in lake sediments using a thermal–optical transmittance (TOT) method

An improved chemical oxidation pretreatment method has been developed for the determination of elemental carbon (EC) [also known as black carbon (BC) or soot] in lake sediments, using a thermal–optical transmittance (TOT) carbon analyzer. The method employs six steps: (1) removal of carbonates by treatment with HCl; (2) removal of silicates by treatment with HF + HCl; (3) removal of any remaining carbonates by treatment with HCl; (4) removal of humic acids by treatment with NaOH; and (5) oxidation of kerogens by K₂Cr₂O₇ + H₂SO₄. A critical step of zinc chloride treatment was added; this apparently changes EC's morphology and enhances retention on quartz fiber filter, resulting in several-fold increased chemical yield. EC was determined using the TOT method with modified combustion timings. Carbon black (acetylene) and four NIST standard reference materials (SRMs) were used for quality control, and to assess the precision of the analysis. The EC recoveries from 18 carbon black samples varied from 90 to 111%, with a mean value of 99 ± 6%. The high EC recoveries confirmed the validity of the method. Char reference materials (i.e. chestnut wood and grass char) were used to determine potential contribution to EC in our measurements. The char references containing about 700 mg total organic carbon (OC) contributed ～1.5% EC. The measured EC values from four NIST standards were 17.0 ± 0.6, 24.2 ± 3.2, 5.6, and 1.9 ± 0.1 mg g_dw^?1 for SRM-1648, SRM-1649a, SRM-1941b and SRM-8704, respectively. These values in SRMs were in agreement (<±4%) with the previously reported values. The method was applied to determine the EC in sediment cores from an urban lake and a remote mountain lake in the Northeastern United States. The EC concentrations in two lakes mimic the model EC emissions from the industrial revolution in United States.     

Workplace Design for Manual Assembly Tasks: Effect of Spatial Arrangement on Work-Cycle Time

This article reports the results of an experimental study undertaken to investigate the effect of spatial arrangement of assembly board and parts bin in the normal work area on work-cycle time in manual assembly tasks. Operator performance was measured in terms of average work-cycle time taken to complete a laboratory-simulated manual assembly task. Results showed that both location and distance factors had significant effects on work-cycle time. Effect of the size of parts was also investigated in the study. Average observed work-cycle times were compared with the methods–time measurement (MTM) values. Repetitive manual assembly tasks are common in industry and are thought to lead to musculoskeletal disorders. The results of this research are important for ergonomic design of the workplace for assembly tasks, which would help to enhance operators’ efficiency.     

An empirical investigation of nuclear energy and environmental pollution nexus in India: fresh evidence using NARDL approach

Environmental Science and Pollution Research - Environmental pollution caused by carbon emissions is an emerging issue to study among researchers. The nexus between environmental pollution and...     

The role of weekly high‐activated positive mood,context, and personality in innovative work behavior: A multilevel and interactional model

This article proposed and tested a multilevel and interactional model of individual innovation in which weekly moods represent a core construct between context, personality, and innovative work behavior. Adopting the circumplex model of affect, innovative work behavior is proposed as resulting from weekly positive and high‐activated mood. Furthermore, drawing on the Big Five model of personality and cognitive appraisal theory, openness to experience and support for innovation are proposed as individual and contextual variables, respectively, which interplay in this process. Openness to experience interacts with support for innovation leading to high‐activated positive mood. Furthermore, openness interacts with these feelings leading to greater levels of innovative work behavior. Overall, the model entails a moderated mediation process where weekly high‐activated positive mood represents a crucial variable for transforming contextual and individual resources into innovative outcomes. These propositions were tested and supported using a diary methodology and multilevel structural equation modeling, on the basis of 893 observations of innovative work behavior and moods nested in 10 weekly waves of data. This information was collected from 92 individuals of diverse occupations employed in 73 distinct companies. Theoretical and practical implications are discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

Phytoaccumulation of heavy metals by aquatic plants

Three aquatic plants were examined for their ability to remove heavy metals from contaminated water: parrot feather (Myriophylhum aquaticum), creeping primrose (Ludwigina palustris), and water mint (Mentha aquatic). The plants were obtained from a Solar Aquatic System treating municipal wastewater. All the three plants were able to remove Fe, Zn, Cu, and Hg from the contaminated water. The average removal efficiency for the three plant species was 99.8%, 76.7%, 41.62%, and 33.9% of Hg, Fe, Cu, and Zn, respectively. The removal rates of zinc and copper were constant (0.48 mg/l/day for Zn and 0.11 mg/l/day for Cu), whereas those of iron and mercury were dependent on the concentration of these elements in the contaminated water and ranged from 7.00 to 0.41 mg/l/day for Fe and 0.0787 to 0.0002 mg/l/day for Hg. Parrot feather showed greater tolerance to toxicity followed by water mint and creeping primrose. The growth of creeping primrose was significantly affected by heavy metal toxicity. The selectivity of heavy metals for the three plant species was the same (Hg>Fe>Cu>Zn). The mass balance preformed on the system showed that about 60.45-82.61% of the zinc and 38.96-60.75% of the copper were removed by precipitation as zinc phosphate and copper phosphate, respectively.     

On the successful use of a simplified model to simulate the succession of toxic cyanobacteria in a hypereutrophic reservoir with a highly fluctuating water level

Many freshwater bodies worldwide that suffer from harmful algal blooms would benefit for their management from a simple ecological model that requires few field data, e.g. for early warning systems. Beyond a certain degree, adding processes to ecological models can reduce model predictive capabilities. In this work, we assess whether a simple ecological model without nutrients is able to describe the succession of cyanobacterial blooms of different species in a hypereutrophic reservoir and help understand the factors that determine these blooms. In our study site, Karaoun Reservoir, Lebanon, cyanobacteria Aphanizomenon ovalisporum and Microcystis aeruginosa alternatively bloom. A simple configuration of the model DYRESM-CAEDYM was used; both cyanobacteria were simulated, with constant vertical migration velocity for A. ovalisporum, with vertical migration velocity dependent on light for M. aeruginosa and with growth limited by light and temperature and not by nutrients for both species. The model was calibrated on two successive years with contrasted bloom patterns and high variations in water level. It was able to reproduce the measurements; it showed a good performance for the water level (root-mean-square error (RMSE) lower than 1 m, annual variation of 25 m), water temperature profiles (RMSE of 0.22–1.41 °C, range 13–28 °C) and cyanobacteria biomass (RMSE of 1–57 μg Chl a L^?1, range 0–206 μg Chl a L^?1). The model also helped understand the succession of blooms in both years. The model results suggest that the higher growth rate of M. aeruginosa during favourable temperature and light conditions allowed it to outgrow A. ovalisporum. Our results show that simple model configurations can be sufficient not only for theoretical works when few major processes can be identified but also for operational applications. This approach could be transposed on other hypereutrophic lakes and reservoirs to describe the competition between dominant phytoplankton species, contribute to early warning systems or be used for management scenarios.     

Impact and effectiveness of Bio-Coke conversion from biomass waste as alternative source of coal coke in Southeast Asia

Journal of Material Cycles and Waste Management - Growing concern over fossil fuel depletion and the environmental impact of greenhouse gases have driven the demand for solid biofuel energy as an...     

Evaluation of chlordimeform and degradation products for mutagenic and DNA‐damaging activity in salmonella typhimurium and escherichia coli

Abstract

The mutagenic activity of chlordimeform and two of its breakdown products, 4‐chloro‐o‐toludine and 4‐chloro‐N‐formyl‐o‐toluidine were determined with five histidine dependent strains of Salmonella typhimurium (TA1535, TA1537, TA1538, TA98, TA100) and five tryptophan dependent strains of E. coli WP₂. (WP₂, WP₂uvrA, WP67, CM611, CM571) with and without rat liver microsomal enzymes. 4‐chloro‐o‐toluidine increased the number of the reversions of the S. typhimurium strain TA1535 more than two fold over spontaneous at the concentration of 400 μg/plate.

The results of the DNA repair tests in the Salmonella TA1538/TA1978 and E. coli multirepair deficient systems showed that both breakdown products were active in inducing damage not repaired in at least one repair deficient strain while chlordimeform itself was inactive.