What Is the Potential Measurement Error in Occupational Exposure Studies?

ABSTRACT

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.     

Effectiveness of Photocatalytic Filter for Removing Volatile Organic Compounds in the Heating,Ventilation, and Air Conditioning System

Abstract

Nowadays, the heating, ventilation, and air conditioning (HVAC) system has been an important facility for maintaining indoor air quality. However, the primary function of typical HVAC systems is to control the temperature and humidity of the supply air. Most indoor air pollutants, such as volatile organic compounds (VOCs), cannot be removed by typical HVAC systems. Thus, some air handling units for removing VOCs should be added in typical HVAC systems. Among all of the air cleaning techniques used to remove indoor VOCs, photocatalytic oxidation is an attractive alternative technique for indoor air purification and deodorization. The objective of this research is to investigate the VOC removal efficiency of the photocatalytic filter in a HVAC system. Toluene and formaldehyde were chosen as the target pollutants. The experiments were conducted in a stainless steel chamber equipped with a simplified HVAC system. A mechanical filter coated with Degussa P25 titania photocatalyst and two commercial photocatalytic filters were used as the photo-catalytic filters in this simplified HVAC system. The total air change rates were controlled at 0.5, 0.75, 1, 1.25, and 1.5 hr^?1, and the relative humidity (RH) was controlled at 30%, 50%, and 70%. The ultraviolet lamp used was a 4-W, ultraviolet-C (central wavelength at 254 nm) strip light bulb. The first-order decay constant of toluene and form-aldehyde found in this study ranged from 0.381 to 1.01 hr^?1 under different total air change rates, from 0.34 to 0.433 hr^?1 under different RH, and from 0.381 to 0.433 hr^?1 for different photocatalytic filters.     

Appraising different models for predicting biomethane potential: the case of avocado oil processing by-products

Journal of Material Cycles and Waste Management - Biomethane potentials (BMPs) for avocado oil processing by-products were determined using six different theoretical BMP prediction models and...     

Allocation and source attribution of lead and cadmium in maize (Zea mays L.) impacted by smelting emissions

Plants grown in contaminated areas may accumulate trace metals to a toxic level via their roots and/or leaves. In the present study, we investigated the distribution and sources of Pb and Cd in maize plants (Zea mays L.) grown in a typical zinc smelting impacted area of southwestern China. Results showed that the smelting activities caused significantly elevated concentrations of Pb and Cd in the surrounding soils and maize plants. Pb isotope data revealed that the foliar uptake of atmospheric Pb was the dominant pathway for Pb to the leaf and grain tissues of maize, while Pb in the stalk and root tissues was mainly derived from root uptake. The ratio of Pb to Cd concentrations in the plants indicated that Cd had a different behavior from Pb, with most Cd in the maize plants coming from the soil via root uptake.     

Preliminary investigation of greenhouse gas emissions from the environmental sector in Taiwan

The United Nations Framework Conventions on Climate Change (UNFCCC) asks their Parties to submit a National Inventory Report (NIR) for greenhouse gas (GHG) emissions on an annual basis. However, when many countries are quickly growing their economy, resulting in substantial GHG emissions, their inventory reporting systems either have not been established or been able to be linked to planning of mitigation measures at national administration levels. The present research was aimed to quantify the GHG emissions from an environmental sector in Taiwan and also to establish a linkage between the developed inventories and development of mitigation plans. The "environmental sector" consists of public service under jurisdiction of the Taiwan Environmental Protection Administration: landfilling, composting, waste transportation, wastewater treatment, night soil treatment, and solid waste incineration. The preliminary results were compared with that of the United States, Germany, Japan, United Kingdom, and Korea, considering the gaps in the scopes of the sectors. The GHG emissions from the Taiwanese environmental sector were mostly estimated by following the default methodology in the Intergovernmental Panel on Climate Change guideline, except that of night soil treatment and waste transportation that were modified or newly developed. The GHG emissions from the environmental sectors in 2004 were 10,225 kilotons of CO2 equivalent (kt CO2 Eq.). Landfilling (48.86%), solid waste incineration (27%), and wastewater treatment (21.5%) were the major contributors. Methane was the most significant GHG (70.6%), followed by carbon dioxide (27.8%) and nitrous oxide (1.6%). In summary, the GHG emissions estimated for the environmental sector in Taiwan provided reasonable preliminary results that were consistent and comparable with the existing authorized data. On the basis of the inventory results and the comparisons with the other countries, recommendations of mitigation plans were made, including wastewater and solid waste recycling, methane recovery for energy, and waste reduction/sorting.     

Proximal exposure of public schools and students to major roadways: a nationwide US survey

This study addresses the effect of urban planning and road development on the health risk of students attending schools near major roadways. The proximity of public schools and students was quantified to Interstate, US and state highways in nine large Metropolitan Statistical Areas (MSA) of the USA. In total among the surveyed schools and students, over 30% fell within 400 m of a major roadway and over 10% were within 100 m. For some MSAs almost half of the student population attended schools near (≤400m) major roadways, resulting in a potentially increased risk for asthma and other chronic respiratory problems, especially in schools representing the urban fringe locale. It was concluded that proximity of major roadways should be an important factor in considering sites for new schools and developing policies for reducing the exposure in existing schools. The findings provide an important reference point for coordinating future urban development, transportation and environmental policies.     

Physical impact of waterjet‐based sediment remediation on benthic organisms

Adding activated carbon to sediments has been shown to be an effective means of reducing the bioavailability of certain contaminants. The current state of the practice is to mechanically mix activated carbon to a target concentration of 3 percent at depths of approximately 30 cm using a rotovator or similar construction equipment. Waterjets have been used to cut hard material using a mixture of water and an abrasive. If activated carbon is substituted for the abrasive, waterjets have the potential to use surface injection as a replacement for mechanical mixing during sediment remediation. A perceived benefit of waterjet‐based sediment remediation is that there may be a reduced potential for benthic organism mortality related to amendment delivery. A set of waterjet parameters were identified that have the potential to achieve amendment placement goals, and a series of waterjet tests were conducted to evaluate the potential impact on the benthic community. The tests included mortality testing using a swimming macroinvertebrate and a burrowing invertebrate, benthic artifacts such as shells, and craft foam as a surrogate for living organisms. The results indicated that the immediate survivability was typically greater than 50 percent, and that empirical relationships between two variables (waterjet nozzle diameter and the water column height between the nozzle and the target) and the depth of cut in the foam could be established. Data are not available in the literature for direct comparison of organism survivability immediately after mechanical mixing, but the results of this study provide motivation for the further evaluation of waterjets on the basis of the low observed mortality rates. Future waterjet work may address field‐scale characterization of mixing effectiveness, resuspension potential, technical feasibility, and cost. © 2011 Wiley Periodicals, Inc.     

Advertisement call duration indicates good genes for offspring feeding rate in gray tree frogs (Hyla versicolor)

Indicator or ”good genes” models of sexual selection predict that mating preferences allow females to choose mates that are genetically superior. Female gray tree frogs (Hyla versicolor) prefer male advertisement calls of long call duration, which can be indicators of enhanced offspring growth performance. We tested the effects of father’s call duration and the presence of a caged predator (dragonfly naiad) on tadpole activity and growth in a factorial experiment, controlling for maternal and environmental effects. The effect of food availability (a repeated measure) on tadpole activity was also examined. Tadpoles responded to predator presence and to high food availability by decreasing activity and feeding. Tadpoles exposed to a caged predator were smaller after 14 days than those exposed to an empty cage, suggesting that spending less time feeding carries the cost of reduced growth. Offspring of males with long versus short calls responded similarly to the presence of a predator. Nonetheless, offspring of long-calling males spent more time feeding than did offspring of short-calling males, except when a predator was present but no food was available. Increased time spent feeding may contribute to enhanced offspring growth and, therefore, to the indirect benefit that a female may realize by selecting a mate with long calls. However, because the behavioral differences depended on the environment, and because the fitness consequences of such behavioral differences should also vary with the environment, the benefit of mating with a long-calling male may depend on the conditions encountered by the offspring. Received: 15 February 2000 / Revised: 24 September 2000 / Accepted: 16 October 2000     

Carbonation of brine impacted fractionated coal fly ash: implications for CO2 sequestration

Coal combustion by-products such as fly ash (FA), brine and CO(2) from coal fired power plants have the potential to impact negatively on the environment. FA and brine can contaminate the soil, surface and ground water through leaching of toxic elements present in their matrices while CO(2) has been identified as a green house gas that contributes significantly towards the global warming effect. Reaction of CO(2) with FA/brine slurry can potentially provide a viable route for CO(2) sequestration via formation of mineral carbonates. Fractionated FA has varying amounts of CaO which not only increases the brine pH but can also be converted into an environmentally benign calcite. Carbonation efficiency of fractionated and brine impacted FA was investigated in this study. Controlled carbonation reactions were carried out in a reactor set-up to evaluate the effect of fractionation on the carbonation efficiency of FA. Chemical and mineralogical characteristics of fresh and carbonated ash were evaluated using XRF, SEM, and XRD. Brine effluents were characterized using ICP-MS and IC. A factorial experimental approach was employed in testing the variables. The 20-150 μm size fraction was observed to have the highest CO(2) sequestration potential of 71.84 kg of CO(2) per ton of FA while the >150 μm particles had the lowest potential of 36.47 kg of CO(2) per ton of FA. Carbonation using brine resulted in higher degree of calcite formation compared to the ultra-pure water carbonated residues.     

Investigating the chromium status,heavy metal contamination,and ecological risk assessment via tannery waste disposal in sub-Saharan Africa (Kenya and South Africa)

Environmental Science and Pollution Research - To mitigate the negative environmental and public health concerns associated with increased industrial discharges amid the rapid industrial growth,...