An evaluation of the toxicity and bioaccumulation of cisplatin in the marine environment using the macroalga, Ulva lactuca

The cytotoxic drug, cisplatin (cis-PtCl₂(NH₃)₂), has been added to cultures of the marine macroalga, Ulva lactuca, under various experimental conditions. Both accumulation and internalisation over a 48 h period was greater when cisplatin was added to coastal sea water (salinity = 33) from a distilled water solution than when added to either sea water or estuarine water (salinity = 16.5) from a saline solution. This effect is attributed to the greater abundance of the more reactive monoaqua complex (cis-PtCl(OH₂)(NH₃)₂⁺) in the distilled water solution and kinetic constraints on its conversion back to cis-PtCl₂(NH₃)₂ in sea water. Despite its mode of action at the cellular level, cisplatin added up to concentrations of 150 nM did not incur a measurable reduction in the efficiency of photochemical energy conversion under any of experimental conditions tested.     

Experimental determination of optimum gutter brush parameters and road sweeping criteria for different types of waste

The removal ability of gutter brushes for road sweeping for various debris types and different sweeping parameters is studied through experimental tests. The brushing test rig used comprises two commercial gutter brushes, a concrete test bed, and an asphalt test road with a gutter of 0.25 cm width and 10° slope. The brush-surface contact area is determined by sweeping sand on the concrete test bed. Sweeping problems are identified and discussed, and sweeping criteria for the different debris types are suggested. Also, optimum sweeping parameters are proposed for each debris type. In addition, debris removal mechanisms are discussed and analysed. The results indicate that for large heavy debris such as stones and gravel, it is not difficult to achieve large removal forces, because the steel bristles are relatively stiff. Conversely, high removal forces are not needed for particles of millimetre or micron sizes, but bristle curvature has to be appropriate to remove particles from road concavities. Finally, it is found that mud, especially dry mud on a rough surface, is the hardest debris to sweep, requiring a brush with a large tilt angle and a very large penetration to produce large removal forces.     

Influence of environmental street characteristics on walking route choice of elderly people

Walking is an important source of outdoor physical activity among elderly people. In order to devise measures aimed at encouraging walking among the elderly it is important to understand how the local environment influences the walking behaviour of elderly people. Here, a model describing the influence of environmental street characteristics on the walking route choice of elderly people is presented. Techniques adapted from the field of transportation research were employed within the model. Data concerning the walking route choice to specific destinations reported by 364 independently living elderly residents (55–80 years) from three Dutch urban districts were collected. Route choice was modelled within a ‘Geographic Information System’ (GIS) database by using ‘resistance factors’ to describe the resistance to walking of street sections (i.e. links) within the street network. These factors were optimized by minimizing the difference between the estimated and the reported number of trips along each link. This is, to the authors' knowledge the first time that this technique has been applied within this context. The influence of link characteristics on link resistance was investigated by multivariate linear regression. The first results of the route choice model and the influence of street characteristics on route choice are reported and discussed.     

Evaluation of a unified regional air-quality modeling system (AURAMS) using PrAIRie2005 field study data: The effects of emissions data accuracy on particle sulphate predictions

The effects of the accuracy of major-point source emissions input data on the predictions of a regional air-quality model (AURAMS) were investigated through a series of scenario simulations. The model domain and time period were chosen to correspond to that of PrAIRie2005, an air-quality field study with airborne and ground-based mobile measurement platforms that took place between August 12th and September 7th, 2005, over the city of Edmonton, Alberta, Canada. The emissions data from standard sources for three coal-fired power-plants located west (typically upwind) of the city were compared to the continuous emissions monitoring system (CEMS) taking place at the time of the study – the latter showed that the original emissions inventory data considerably overestimated NO_x, SO₂, and primary particulate emissions during the study period. Further field investigation (stack sampling) in the fall of 2006 showed that the measured primary particle size distribution and chemical speciation for the emissions were strikingly different from the distribution and speciation originally used in the model. The measured emissions were used to scale existing emissions data in accord with the CEMS and in-stack measurements.The effects of these improvements to the emissions data were examined sequentially in nested AURAMS simulations (finest horizontal resolution 3 km), and were compared to airborne aerosol mass spectrometer (Aerodyne AMS) measurements of particle sulphate, and particle distributions from an airborne passive cavity aerosol spectrometer probe (PCASP). The emissions of SO₂ had the greatest impact on predicted PM₁ sulphate, while the primary particle size distribution and chemical speciation had a smaller role. The revised emissions data greatly improved the comparisons between observations and model values, though over-predictions of fine-mode sulphate still occur near the power-plants, with the use of the revised emissions data. The modified emissions also had a significant impact on the larger particles of the particulate matter, with more primary PM in sizes greater than 1 μm diameter than had previously been estimated, and higher large particle concentrations close to the power-plants.     

Cumulative impact of GM herbicide-tolerant cropping on arable plants assessed through species-based and functional taxonomies

Background, aim and scope

In a gradualist approach to the introduction of crop biotechnology, the findings of experimentation at one scale are used to predict the outcome of moving to a higher scale of deployment. Movement through scales had occurred for certain genetically modified herbicide-tolerant (GMHT) crops in the UK as far as large-scale field trials. However, the land area occupied by these trials was still <1% of the area occupied by the respective non-GM crops. Some means is needed to predict the direction and size of the effect of increasing the area of GMHT cropping on ecological variables such as the diversity among species and trophic interactions. Species-accumulation curves are examined here as a method of indicating regional-scale impacts on botanical diversity from multiple field experiments.

Materials and methods

Data were used from experiments on the effect of (GMHT) crops and non-GM, or conventional, comparators in fields sown with four crop types (beet, maize, spring and winter oilseed rape) at a total of 250 sites in the UK between 2000 and 2003. Indices of biodiversity were measured in a split-field design comparing GMHT with the farmers’ usual weed management. In the original analyses based on the means at site level, effects were detected on the mass of weeds in the three spring crops and the proportion of broadleaf and grass weeds in winter oilseed rape, but not on indices of plant species diversity. To explore the links between site means and total taxa, accumulation curves were constructed based on the number of plant species (a pool of around 250 species in total) and the number of plant functional types (24), inferred from the general life-history characteristics of a species.

Results

Species accumulation differed between GMHT and conventional treatments in direction and size, depending on the type of crop and its conventional management. Differences were mostly in the asymptote of the curve, indicative of the maximum number of species found in a treatment, rather than the steepness of the curve. In winter oilseed rape, 8% more species were accumulated in the GMHT treatment, mainly as a result of the encouragement of grass species by the herbicide when applied in the autumn. (Overall, GMHT winter oilseed rape had strong negative effects on both the food web and the potential weed burden by increasing the biomass of grasses and decreasing that of broadleaf weeds.) In maize, 33% more species—a substantial increase—were accumulated in the GMHT than in the conventional, consistent with the latter’s highly suppressive weed management using triazine herbicides. In the spring oilseed rape and beet, fewer species (around 10%) were accumulated in the GMHT than the conventional. The GMHT treatments did not remove or add any functional (life history) types, however. Differences in species accumulation between treatments appeared to be caused by loss or gain of rarer species. The generality of this effect was confirmed by simulations of species accumulation in which the species complement at each of 50 sites was drawn from a regional pool and subjected to reducing treatment at each site. Shifts in the species-accumulation parameters, comparable to those measured, occurred only when a treatment removed the rarer species at each site.

Discussion

Species accumulation provided a set of simple curve-parameters that captured the net result of numerous local effects of treatments on plant species and, in some instances, the balance between grass and broadleaf types. The direction of effect was not the same in the four crops and depended on the severity of the conventional treatment and on complex interactions between season, herbicide and crop. The accumulation curves gave an indication of potential positive or negative consequences for regional species pools of replacing a conventional practice with GMHT weed management. In this and related studies, a range of indicators, through which diversity was assessed by both species and functional type, and at both site and regional scales, gave more insight into effects of GMHT treatment than provided by any one indicator.

Conclusions

Species accumulation was shown to discriminate at the regional scale between agronomic treatments that had little effect on species number at the field scale. While a comprehensive assessment of GM cropping needs to include an examination of regional effects, as here, the costs of doing this in all instances would be prohibitive. Simulations of diversity-reducing treatments could provide a theoretical framework for predicting the likely regional effects from in-field plant dynamics.

Recommendations and perspectives

Accumulation curves potentially offer a means of linking within-site effects to regional impacts on biodiversity resulting from any change in agricultural practice. To guide empirical measurement, there is a scope to apply a methodology such as individual-based modelling at the field scale to explore the links between agronomic treatments and the relative abundance of plant types. The framework needs to be validated in practice, using species-based and functional taxonomies, the latter defined by measured rather than inferred traits.     

Characterization of gaseous pollutant and particulate matter emission rates from a commercial broiler operation part II: Correlated emission rates

Emission rates of ammonia, acid gases, inorganic aerosols, methane, and size fractionated particulate matter were measured from a commercial broiler facility. This paper discusses the statistically influential parameters on numerous pollutants’ emission from a broiler chicken facility and generates emission correlations to fill data gaps and develop averaged emission factors.Live mass of the birds was commonly a significant variable to each pollutant’s emission. Some variables significantly impacted the pollutants’ emissions, such as litter moisture content, but were measured discretely and cannot be used for filling in data gaps.House parameter correlations were, therefore, developed using parameters measured at the facility, such as indoor temperature, relative humidity, and the live mass of the birds, and relied on the mutual behaviour of discretely measured explanatory parameters and continuously monitored confounding variables. The live mass and the difference in the indoor temperature and the house set-point temperature were the most significant variables in each pollutant’s correlation.The correlations predicted each pollutants emission to within 20% (total mass basis) over most broiler production cycles. Their validation on independent datasets also successfully estimated the flocks’ emissions to within 3%.Emission factors (EFs) were developed for methane, ammonia, and size fractionated particulate matter using measured data and correlated emissions to fill in data gaps. PM₁₀ (particulate matter ≤10 microns) EFs were estimated to be 4.6 and 5.9 g d^?1 [Animal Unit, AU]^?1 for five and six week production cycles, respectively. PM_2.5 (PM ≤ 2.5 microns) EFs were 0.8 and 1.4 g d^?1 AU^?1 for five and six week cycles, respectively. Ammonia and methane emission factors were estimated at 120.8 and 197.0 g d^?1 AU^?1, respectively for a five week production cycle.     

Embracing sustainability: the incorporation of sustainability principles in municipal planning and policy in four mid-sized municipalities in Ontario,Canada

The issue of planning for sustainability is becoming more established within Canadian municipal planning. As municipalities begin to align their planning policy to reflect a more sustainable approach, there is an increased interest in how sustainability is being operationalised within municipal documents. This research aims to better understand how principles of sustainability are imbedded within Ontario municipal documents, with a specific focus on the Integrated Sustainability Community Planning approach that has emerged in Canada. Drawing on a nested comparative case study of four mid-sized municipalities, we uncover the language and strategies employed by the municipalities as they relate to the principles of sustainability developed by Gibson [2006a. Sustainability assessment: basic components of a practical approach. Impact Assessment and Project Appraisal, 24 (3), 170–182]. The findings suggest that current policy-based approaches to sustainability are considering more socially oriented strategies focused on promoting community involvement, inclusive decision-making, equity, socio-ecological civility, long-term integrative planning, and responsibility through stewardship. However, there are potential limitations that will require future research to examine policy outcomes associated with sustainability uptake. The ICSP approach must still overcome the issues relating to lack of regulatory authority and the incorporation of policies based on popular trends rather than empirical evidence.     

Evaluation of Active Cap Materials for Metal Retention in Sediments

This study evaluated chemically active amendments used to construct active caps for remediating contaminated sediments. Three experiments assessed the effects of apatite, organoclay, zeolite, and biopolymers (chitosan and xanthan) on metal mobility, retention, and speciation. The first showed that the amendments individually and in mixtures (2 percent dry weight) reduced the concentrations of Cr, Co, Ni, and Pb in water extracts from reduced sediment. The second experiment, which used sequential extraction procedures to evaluate the effects of the amendments on metal speciation, showed that the amendments reduced the potentially mobile fractions of Pb, Zn, Ni, Cr, and Cd that are likely to be bioavailable. Last, column studies showed that active caps composed of the amendments prevented the diffusive transport of metals from contaminated sediment over six months. In addition, there was a “zone of influence” beneath the caps in which water extractable concentrations of metals declined substantially compared with untreated sediment. © 2014 Wiley Periodicals, Inc.     

Using Farmers’ Actions to Measure Crop Loss Due to Air Pollution

The effects of ozone on the profitability of Illinois cash grain farms is investigated by utilizing a profit function framework. This approach uses individual farms as the observational unit so the data are generated under field conditions. Hence, experimental plot data are not used although results from past biological experiments are utilized to frame initial hypotheses and for evaluation of the estimated model. This study demonstrates the benefits of combining economic data and biological science results to estimate the economic reactions of producers in terms of input and output (production) response to an ambient environmental characteristic.

A time series of cross sectional data on cash grain farms in Illinois is used to estimate two profit functions. Ozone data are measured on a growing season basis by county. The estimated model shows ozone has a negative effect on profits. Increases in ozone levels tend to depress output levels and lessen the demand for variable inputs. Additionally, a production function is derived from one of the profit functions. The impact of ozone is found to be in general agreement with dose-response data obtained in Illinois by plant scientists.     

Effects of oil sands process-affected waters and naphthenic acids on yellow perch (Perca flavescens) and Japanese medaka (Orizias latipes) embryonic development

Syncrude Canada Ltd. is currently developing environmentally acceptable oil sands process-affected water management methods as part of their land reclamation strategy. Surface waters of the “wet landscape” reclamation option characteristically have elevated concentrations of sodium sulphate and naphthenic acids (NAs), with low levels of PAHs. The following experiment compared early-life stage responses of yellow perch (Perca flavescens) to those of Japanese medaka (Oryzias latipes) when exposed to Mildred Lake settling basin (MLSB) surface water and a commercial sodium naphthenate (Na-NA) standard. Perch eggs were fertilized and incubated in: 100%, 50%, 20%, 4%, 0.8%, and 0.16% dilutions of MLSB water, as well as 20, 10, 5, 2.5, and 1.25 mg/l solutions of the commercial standard. Medaka embryos were exposed to the same treatments, post-fertilization. Both species demonstrated an increase in the incidence of deformity, and a decrease in length at hatch as NA concentrations increased. MLSB surface water contained higher levels of NAs than the commercial standard, however, showed consistently higher NA threshold effect concentrations for both species. Significant differences between the MLSB water and the Na-NA standard suggest that they contain NA congeners with different toxicity, or other compounds such as PAHs. Species differences in thresholds could be explained by the difference in developmental stage in which the exposures were initiated.