Fine particulate matter and visibility in the Lake Tahoe Basin: chemical characterization, trends, and source apportionment

Speciated PM2.5 (particulate matter with an aerodynamic diameter相似文献   

Leaching of pharmaceuticals and personal care products in turfgrass soils during recycled water irrigation

An important beneficial reuse of treated wastewater (recycled water) in arid and semiarid regions is landscape irrigation. However, the environmental fate, especially groundwater contamination potential, of trace contaminants such as pharmaceuticals and personal care products (PPCPs) is a significant concern that can hinder the acceptance and adoption of such reuses. In this study, we irrigated mature turfgrass plots with nonspiked tertiary treated wastewater for over 6 mo at 100 or 130% of the reference evapotranspiration rate (ETo) and collected leachate water at the 90-cm depth on a weekly basis. In the recycled water, all 14 target PPCPs were consistently found, and the mean levels of atenolol, gemfibrozil, meprobamate, carbamazepine, and sulfamethoxazole were above 100 ng L. However, only five compounds were detected in the leachate at trace levels. Trimethoprim and primidone were frequently found, whereas the detection of sulfamethoxazole, meprobamate and carbamazepine was less frequent (<50%). When detected, the overall mean concentration in the leachate was 10.2 ng L for trimethoprim, 7.1 ng L for primidone, and 2.9 to 12.4 ng L for carbamazepine, sulfamethoxazole, and meprobamate. The majority of the target PPCPs were completely removed. Given that the irrigation rates were higher than normal, this study clearly demonstrated the efficacy of turfgrass systems in attenuating PPCPs during recycled water irrigation. However, it is also apparent that some PPCPs are more susceptible to leaching than others, and these PPCPs thus merit further research attention.     

Disaster risk reduction capacity assessment for precarious settlements in Guatemala City

This study presents findings of an institutional capacity analysis of urban disaster risk reduction for informal settlements in the Guatemala Metropolitan Region. It uses a resource access perspective of vulnerability, actor-network theory, and qualitative data collection. The analysis reveals that there is interest in disaster risk reduction for the informal settlements; however, there is little in the way of direct financial or oversight relationships between informal settlement residents and all other actors. Respondents observed that informal settlements would probably remain inhabited; thus, there is a need for disaster risk reduction within these settlements. Disaster risk reduction capacity for informal settlements exists and can be further leveraged, as long as steps are taken to ensure appropriate access to and control of resources and oversight. Further, the nascent institutional arrangements should be strengthened through increased communication and coordination between actors, a decentralization of oversight and financial relationships, and mediation of identified resource conflicts.     

An Evaluation of Emissions and Control Technologies for the Metal Decorating Process

Data are reported on a number of controlled and uncontrolled sources from various metal decorating operations. Emission levels are related to process variables such as ink coverage, coater speed, sheet size, and applied coating film weight. Results are presented depicting variation of organic emission levels from a coating process line with elapsed process time. For controlled sources employing either catalytic or thermal incineration, conversion efficiencies are reported as a function of temperature. Operational curves are presented for each control system studied indicating the dependence of carbon dioxide, NO_x, and organic output on incineration temperatures.     

Energy Consumption Requirements for Air Pollution Control Equipment at An Iron Foundry

Energy consumption requirements for air pollution control equipment were studied for varying removal efficiency levels at the Tyler Pipe Industries iron foundry in Tyler, Texas, based on plant fuel consumption data, and on field test measurements of cupola carbon monoxide and particulate control equipment. Natural gas consumption for CO removal increased from 0 in 1970 to 25.4% of the plant total in 1976. Operating costs to achieve 85% CO control increased from 0 in 1970 to $1.61/ton metal in 1976. Increasing cupola incinerator temperature from 800° to 1600° F increased CO removal efficiency from 60 to 97%, but also increased natural gas consumption by 150%. Electricity consumption requirements for 95% to 97% particulate control at the foundry increased from 0.1 % of plant total in 1970 to 18.7% in 1976. Electricity consumption for particulate controls increased plant operating costs from 0.004 in 1970 to 1.693 $/ton metal in 1976 as horsepower increased from 20 to 6,272. Cost-benefit methodology is needed to evaluate trade-offs between air pollution control, energy consumption requirements and operating costs of proposed regulations. Total air pollution control system must be considered in enforcing regulations instead of the source to be controlled alone for overall impacts. Need exists for process modifications to enhance energy recovery and development of energy-effective air pollution control equipment.     

Wind Roses for Florida

A three-dimensional Joint frequency distribution (3DJFD) map of Florida is developed based upon wind rose data available for 10 cities. This map may be used in conjunction with the analytic polar coordinate Gaussian Plume Model or conventional dispersion models to calculate the approximate incremental pollution concentration contours associated with an emission source at any site in Florida. Possible means of generalizing the work to other geographic regions, to stack height altitudes, and to incorporate time dependence are discussed.     

Use of Project MOHAVE Perfluorocarbon Tracer Data to Evaluate Source and Receptor Models

ABSTRACT

Project MOHAVE was a major monitoring, modeling, and data analysis study whose objectives included the estimation of the contributions of the Mohave Power Project (MPP) and other sources to visibility impairment in the southwestern United States, in particular at Grand Canyon National Park. A major element of Project MOHAVE was the release of perfluorocarbon tracers at MPP and other locations during 50-day summer and 30-day winter intensive study periods. Tracer data (from about 30 locations) were sequestered until several source and receptor models were used to predict tracer concentrations. None of the models was successful in predicting the tracer concentrations; squared correlation coefficients between predicted and measured tracer were all less than 0.2, and most were less than 0.1.     

Diclofenac disposition in Indian cow and goat with reference to Gyps vulture population declines

Gyps vultures across India are declining rapidly and the NSAID diclofenac has been shown to be the major cause. Vultures scavenge livestock carcasses that have been treated with diclofenac within the days preceding death. We present data on diclofenac disposition in Indian cow and goat, and field data on the prevalence of diclofenac in carcases in the environment. In the disposition experiment, animals were treated with a single intramuscular injection of diclofenac at 1000 microg kg-1 bw. In cow, diclofenac was detectable in liver, kidney and intestine up to 71 h post-treatment; in plasma, half-life was 12.2 h. In goat, tissue residues were undetectable after 26 h. Prevalence of diclofenac in liver from 36 dead livestock collected in the field was 13.9%. Data suggest that diclofenac residues in Indian cow and goat are short-lived, but diclofenac prevalence in carcasses available to vultures may still be very high.     

Developing a translational discourse to communicate uncertainty in flood risk between science and the practitioner

The language and tools of risk and uncertainty estimation in flood risk management (FRM) are rarely optimized for the extant communication challenge. This paper develops the rationale for a pragmatic semiotics of risk communication between scientists developing flood models and forecasts and those professional groups who are the receptors for flood risk estimates and warnings in the UK. The current barriers to effective communication and the constraints involved in the formation of a communication language are explored, focusing on the role of the professional's agenda or "mission" in creating or reducing those constraints. The tools available for the development of this discourse, for both flood warnings in real time and generalized FRM communications, are outlined. It is argued that the contested ownership of the articulation of uncertainties embedded in flood risk communications could be reduced by the development of a formally structured translational discourse between science and professionals in FRM, through which process "codes of practice" for uncertainty estimation in different application areas can be developed. Ways in which this might take place in an institutional context are considered.     

Emissions of chromium (VI) from arc welding

The presence of Cr in the +6 oxidation state (Cr[VI]) is still observed in ambient air samples in California despite steps taken to reduce emissions from plating operations. One known source of emission of Cr(VI) is welding, especially with high Cr-content materials, such as stainless steels. An experimental effort was undertaken to expand and update Cr(VI) emission factors by conducting tests on four types of arc-welding operations: gas-metal arc welding (GMAW), shielded metal arc welding (SMAW), fluxcore arc welding, and pulsed GMAW. Standard American Welding Society hood results were compared with a total enclosure method that permitted isokinetic sampling for particle size-cut measurement, as well as total collection of the aerosol. The fraction of Cr(VI) emitted per unit mass of Cr electrode consumed was determined. Consistent with AP-42 data, initial results indicate that a significant fraction of the total Cr in the aerosol is in the +6 oxidation state. The fraction of Cr(VI) and total aerosol mass produced by the different arc welding methods varies with the type of welding process used. Self-shielded electrodes that do not use a shield gas, for example, SMAW, produce greater amounts of Cr(VI) per unit mass of electrode consumed. The formation of Cr(VI) from standard electrode wires used for welding mild steel was below the method detection limit after eliminating an artifact in the analytical method used.