Decadal change in vegetation and soil phosphorus pattern across the Everglades landscape

Wetlands respond to nutrient enrichment with characteristic increases in soil nutrients and shifts in plant community composition. These responses to eutrophication tend to be more rapid and longer lasting in oligotrophic systems. In this study, we documented changes associated with water quality from 1989 to 1999 in oligotrophic Everglades wetlands. We accomplished this by resampling soils and macrophytes along four transects in 1999 that were originally sampled in 1989. In addition to documenting soil phosphorus (P) levels and decadal changes in plant species composition at the same sites, we report macrophyte tissue nutrient and biomass data from 1999 for future temporal comparisons. Water quality improved throughout much of the Everglades in the 1990s. In spite of this improvement, though, we found that water quality impacts worsened during this time in areas of the northern Everglades (western Loxahatchee National Wildlife Refuge [NWR] and Water Conservation Area [WCA] 2A). Zones of high soil P (exceeding 700 mg P kg(-1) dry wt. soil) increased to more than 1 km from the western margin canal into the Loxahatchee NWR and more than 4 km from northern boundary canal into WCA-2A. This doubling of the high soil P zones since 1989 was paralleled with an expansion of cattail (Typha spp.)-dominated marsh in both regions. Macrophyte species richness declined in both areas from 1989 to 1999 (27% in the Loxahatchee NWR and 33% in WCA-2A). In contrast, areas well south of the Everglades Agricultural Area, induding WCA-3A and Everglades National Park (ENP), did not decline during this time. We found no significant decadal change in plant community patterns from 1989 and 1999 along transects in southern WCA-3A or Shark River Slough (ENP). Our 1999 sampling also included a new transect in Taylor Slough (ENP), which will allow change analysis here in the future. Regular sampling of these transects, to verify decadal-scale environmental impacts or improvements, will continue to be an important tool for long-term management and restoration of the Everglades.     

Sorption of selenium anionic species on apatites and iron oxides from aqueous solutions

The sorption of selenite and selenate ions from aqueous solutions was investigated on hydroxyapatite, fluorapatite, goethite and hematite, in order to simulate the behavior of radioactive selenium in natural or artificial sorbing media. Correlation studies with acido-basic properties and solubility of the solids were also performed. The sorption is pH dependant, but these solids are very efficient for retaining selenite at pH values generally encountered in natural waters, with however higher K(d) values for oxides than apatites. Selenate ions are much less sorbed than selenite. Several methods such as electron microscopy and spectroscopic techniques were used to identify the sorption mechanisms. In the case of hydroxyapatite, sorption proceeds by substitution of phosphate groups in the lattice of the apatite crystal in the superficial layers of the solid. In the case of goethite and hematite, sorption can be interpreted and modeled by a surface complexation process, but there is a discrepancy between sorption site densities for selenite and for protons.     

SOIL EROSION AND GROUND WATER POLLUTION TRADEOFFS FOR NONIRRIGATED FARMING SYSTEMS1

ABSTRACT: Traditional focus on reducing one environmental externality may cause another externality to increase. This article examines the environmental and economic costs of abating soil loss and (or) nitrate leaching through alternative optimal production systems in the nonirrigated farming systems of Northeastern Oregon. Models estimating soil loss and nitrate‐nitrogen leaching rates associated with current production processes, are linked to a Multi‐Objective Programming (MOP) model. The results show that site specific conditions influence the level of abatement expenditures and optimal production strategies to reduce soil loss and leaching rates. Moreover, while existing production strategies are effective in reducing soil loss at little cost, no strategies could be identified to reduce nitrate leaching rate on some soils.     

Another look at the locus of control–organizational commitment relationship: it depends on the form of commitment

Previous studies imply that individuals with an external locus of control (LOC) are less likely to be committed to their organizations. More recent work on organizational commitment has suggested that commitment is not a unidimensional construct and can take several forms (e.g., affective and continuance). Using a sample of 232 employees of a Canadian governmental agency, we examined the relations between LOC and two different forms of organizational commitment that have been found to have different antecedents and consequences. We found that internal LOC was associated with affective commitment and external LOC was associated with continuance commitment. Implications for research and practice are discussed. Copyright © 1999 John Wiley & Sons, Ltd.     

Repeated compost application effects on phosphorus runoff in the Virginia Piedmont

Increasing amounts of animal and municipal wastes are being composted before land application to improve handling and spreading characteristics, and to reduce odor and disease incidence. Repeated applications of composted biosolids and manure to cropland may increase the risk for P enrichment of agricultural runoff. We conducted field research in 2003 and 2004 on a Fauquier silty clay loam (Ultic Hapludalfs) to compare the effects of annual (since 1999) applications of composted and uncomposted organic residuals on P runoff characteristics. Biosolids compost (BSC), poultry litter-yard waste compost (PLC), and uncomposted poultry litter (PL) were applied based on estimated plant-available N. A commercial fertilizer treatment (CF) and an unamended control treatment (CTL) were also included. Corn (Zea mays L.) and a cereal rye (Secale cereal L.) cover crop were planted each year. We applied simulated rainfall in fall 2004 and analyzed runoff for dissolved reactive P (DRP), total dissolved P (TDP), total P (TP), total organic C (TOC), and total suspended solids (TSS). End of season soil samples were analyzed for Mehlich-3 P (M3P), EPA 3050 P (3050P), water soluble P (WSP), degree of P saturation (DPS), soil C, and bulk density. Compost treatments significantly increased soil C, decreased bulk density, and increased M3P, 3050P, WSP, and DPS. The concentration of DRP, TDP, and TP in runoff was highest in compost treatments, but the mass of DRP and TDP was not different among treatments because infiltration was higher and runoff lower in compost-amended soil. Improved soil physical properties associated with poultry litter-yard waste compost application decreased loss of TP and TSS.     

Mercury Emissions from a Hazardous Waste Incinerator Equipped with a State-of-the-Art Wet Scrubber

Abstract

Over a six-week period, eleven tests were performed at the U.S. EPA Incineration Research Facility (IRF) in Jefferson, Arkansas to evaluate the fate of trace metals fed to a rotary kiln incinerator equipped with a Calvert Flux-Forcer/Condensation Scrubber pilot plant as the primary air pollution control system (APCS). Test variables were kiln temperature, ranging from 538 °C to 927 °C; waste feed chlorine content, ranging from 0% to 3.4%; and scrubber pressure drop, ranging from 8.2 kPa to 16.9 kPa. Mercury was among the six hazardous constituent trace metals fed to the IRF’s pilotscale rotary kiln incineration system as part of a synthetic waste feed. This paper focuses on the test results solely with respect to mercury.

As expected, mercury behaved as a very volatile metal throughout the tests; it was not detected in any kiln ash samples. Scrubber collection efficiency for mercury ranged from 67% to >99%, averaging 87%; this was somewhat lower than expected and may be attributable to low scrubber loadings.

The ability to collect and analyze representative scrubber water samples appears to have been affected by the waste feed chlorine content; detection of mercury at higher concentrations during high waste-chlorine-content tests is thought to be largely the result of the formation of mercuric chloride, a more water-soluble species, during those tests. As a result, no firm conclusions may be drawn regarding the true impact of waste feed chlorine content on mercury partitioning to the scrubber water. As expected, no significant relationship was observed between kiln exit-gas temperature and mercury partitioning, nor was there a significant relationship with scrubber pressure drop.     

Comparative study of hotplate wet digestion methods for the determination of mercury in biosolids

The re-use of biosolids is becoming increasingly popular for land applications. However, biosolids may contain elevated levels of metals and metalloids (including mercury) relative to background environmental concentrations. Consequently, reliable mercury analysis is important to allow classification of biosolids and to determine appropriate options for beneficial uses. This paper reports on a comparative study of 12 hotplate wet digestion methods for their suitability for the determination of mercury in biosolids. The methods were applied to mercury biosolids samples from four localities of two different sewage treatment plants in the State of Victoria, Australia. Samples were also spiked with methylmercury chloride and mercury sulphide to evaluate the Hg recovery in each hotplate digestion method. Aqua regia (HCl:HNO(3)=3:1), reverse aqua regia (HCl:HNO(3)=1:3), nitric, hydrochloric, sulphuric acid and their combinations with or without hydrogen peroxide were studied as wet digestion solutions. The method providing the best mercury recoveries was optimized. Under optimal conditions the corresponding analytical procedure consisted of 1h pre-digestion of 0.4 g biosolids sample with 10 ml reverse aqua regia with temperature increasing to 110 degrees C and 3h digestion at this temperature. In the last 10 min of the digestion step, 2 ml hydrogen peroxide were added to ensure complete decomposition of all mercury containing compounds. After filtering and dilution with deionised water (1:10), the concentration of mercury was determined by cold vapour atomic absorption spectrometry. It is expected, that the wet acid digestion method developed in this study will be also applicable to biosolids from other sewage treatment plants and to other types of solid mercury samples with elevated levels of organic matter.     

Membrane introduction/laser photoionization time-of-flight mass spectrometry

Two-photon resonance enhanced multiphoton ionization (REMPI) has been shown to be a unique ionization method for mass spectrometry, exhibiting both high sensitivity and chemical selectivity. Because REMPI is a gas-phase method, its applications have been limited either to direct analysis of vapor phase samples, or in conjunction with an initial laser desorption or other vaporization step. We describe here for the first time a combination of membrane introduction mass spectrometry (MIMS) and REMPI with time-of-flight mass spectrometry (TOF-MS), which allows for the direct analysis of trace amounts of organic compounds in water samples. The objective of our research was the detection of very low levels of aromatic contaminants, particularly benzene, toluene, and xylene (BTX), in aqueous solutions without interference due to the water. We have measured limits of detection (LOD) for selected aromatics in water below 1 part-per-trillion with an averaging time of less than 10 s using a continuous sample flow.     

Screening Technology Trains for DNAPL Remediation

The Department of Energy (DOE) is conducting a Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) mandated Remedial Investigation/Feasibility Study for a site contaminated with Dense Non-Aqueous Phase Liquid (DNAPL) pollutants. Three key efforts were a hydrogeological modeling approach, the generation of feasible sequences of technologies, and the screening of alternative technologies. This research uses a decision analysis process to provide a quantitative assessment of the candidate technologies. Decision analysis modeling was used to gain insight into each sequence of technologies. Sensitivity analysis was also conducted to assess the impact of key assumptions. The results provided the DOE with an objective and traceable rationale for screening and reducing all of the potential technology combinations to 58 technology combinations and a method for identifying the top scoring combinations. The approach has wide applicability to similar CERCLA remediation efforts.