Mercury Emissions from a Hazardous Waste Incinerator Equipped with a State-of-the-Art Wet Scrubber

Abstract

Over a six-week period, eleven tests were performed at the U.S. EPA Incineration Research Facility (IRF) in Jefferson, Arkansas to evaluate the fate of trace metals fed to a rotary kiln incinerator equipped with a Calvert Flux-Forcer/Condensation Scrubber pilot plant as the primary air pollution control system (APCS). Test variables were kiln temperature, ranging from 538 °C to 927 °C; waste feed chlorine content, ranging from 0% to 3.4%; and scrubber pressure drop, ranging from 8.2 kPa to 16.9 kPa. Mercury was among the six hazardous constituent trace metals fed to the IRF’s pilotscale rotary kiln incineration system as part of a synthetic waste feed. This paper focuses on the test results solely with respect to mercury.

As expected, mercury behaved as a very volatile metal throughout the tests; it was not detected in any kiln ash samples. Scrubber collection efficiency for mercury ranged from 67% to >99%, averaging 87%; this was somewhat lower than expected and may be attributable to low scrubber loadings.

The ability to collect and analyze representative scrubber water samples appears to have been affected by the waste feed chlorine content; detection of mercury at higher concentrations during high waste-chlorine-content tests is thought to be largely the result of the formation of mercuric chloride, a more water-soluble species, during those tests. As a result, no firm conclusions may be drawn regarding the true impact of waste feed chlorine content on mercury partitioning to the scrubber water. As expected, no significant relationship was observed between kiln exit-gas temperature and mercury partitioning, nor was there a significant relationship with scrubber pressure drop.     

Biotransformation of Herbicides in the Presence of Various Electron Acceptors

Abstract

Among the important factors affecting the biotransformation of xenobiotic chemicals upon their release into the environment are the dominant electron acceptor condition present and the presence of other, more readily degraded carbon sources. Here, glass-bead biofilm columns were used to investigate the effects of the presence of three different inorganic electron acceptor conditions (oxygen respiration, nitrate reduction, and sulfate reduction) on the biotransformation of the acetanilide herbicides alachlor and propachlor, and to determine the effects of two exogenous carbon sources (acetate and glucose) on their biotransformation under each of these conditions.

Biotransformation of alachlor and propachlor occurred in the presence of both carbon sources and under each of the three electron acceptor conditions. Both were transformed most rapidly under sulfate-reducing conditions. Analysis by gas chromatography/mass spectrometry (GC/MS) did not reveal any significant metabolic products. Both herbicides react abiotically with bisulfide, produced within the sulfate-reducing cultures, though most of the transformation was attributed to the microorganisms. The primary, readily degraded carbon source (acetate or glucose) was needed to establish each culture, and its continuous presence was required to sustain herbicide biotransformation in the sulfate-reducing reactors. Loss of either acetate or glucose from the column influent did not significantly affect herbicide biotransformation in the aerobic or nitratereducing reactors, at least for short periods. Temporary loss of the external electron acceptors (O₂, NO^- ₃or SO₄ ^2-) slowed transformation of both herbicides.     

Sustainable Development by Design: Review of Life Cycle Design and Related Approaches

The environmental profile of goods and services that satisfy our individual and societal needs is shaped by design activities. Substantial evidence suggests that current patterns of human activity on a global scale are not following a sustainable path. Necessary changes to achieve a more sustainable system will require that environmental issues be more effectively addressed in design. But at present much confusion surrounds the incorporation of environmental objectives into the design process. Although not yet fully embraced by industry, the product life cycle system is becoming widely recognized as a useful design framework for understanding the links between societal needs, economic systems and their environmental consequences. The product life cycle encompasses all activities from raw material extraction, manufacturing, and use to final disposal of all residuals.

Life cycle design (LCD), Design for Environment (DFE), and related initiatives based on this product life cycle are emerging as systematic approaches for integrating environmental issues into design. This review presents the life cycle design framework developed forthe U.S. Environmental Protection Agency as a structure for discussing the environmental design literature. Specifying environmental requirements and evaluation metrics are essential elements of designing for sustainable development. A major challenge for successful design is choosing appropriate strategies that satisfy cost, performance, cultural, and legal criteria while also optimizing environmental objectives. Various methods for specifying requirements, strategies for reducing environmental burden, and environmental evaluation tools are explored and critiqued. Currently, many organizational and operational factors limit the applicability of life cycle design and other design approaches to sustainable development. For example, lack of environmental data and simple, effective evaluation tools are major barriers. Despite these problems, companies are beginning to pursue aspects of life cycle design. The future of life cycle design and sustainable development depends on education, government policy and regulations, and industry leadership but fundamental changes in societal values and behavior will ultimately determine the fate of the planet’s life support system.     

Characterization of the Fugitive Particulate Emissions from Construction Mud/Dirt Carryout

Abstract

Although the fugitive dust associated with construction mud/dirt carryout can represent a substantial portion of the particulate matter (PM) emissions inventory in non-attainment areas, it has not been well characterized by direct sampling methods. In this paper, a research program is described that directly determined both PM₁₀ and PM_2.5 (particles ≤10 and 2.5 μm in classical aerodynamic diameter, respectively) emission factors for mud/dirt carryout from a major construction project located in metropolitan Kansas City, MO. The program also assessed the contribution of automotive emissions to the total PM_2.5 burden and determined the baseline emissions from the test road. As part of the study, both time-integrated and continuous exposure-profiling methods were used to assess the PM emissions, including particle size and elemental composition. This research resulted in overall PM₁₀ and PM_2.5 emission factors of 6 and 0.2 g/vehicle, respectively. Although PM₁₀ is within the range of prior U.S. Environmental Protection Agency (EPA) guidance, the PM_2.5 emission factor is far lower than previous estimates published by EPA. In addition, based on both the particle size and chemical data obtained in the study, a major portion of the PM_2.5 emissions appears to be attributable to automotive exhaust from light-duty, gasoline-powered vehicles and not to the fugitive dust associated with re-entrained mud/dirt carryout.     

Design to monitor trend in abundance and presence of American beaver (Castor canadensis) at the national forest scale

Wildlife conservationists design monitoring programs to assess population dynamics, project future population states, and evaluate the impacts of management actions on populations. Because agency mandates and conservation laws call for monitoring data to elicit management responses, it is imperative to design programs that match the administrative scale for which management decisions are made. We describe a program to monitor population trends in American beaver (Castor canadensis) on the US Department of Agriculture, Black Hills National Forest (BHNF) in southwestern South Dakota and northeastern Wyoming, USA. Beaver have been designated as a management indicator species on the BHNF because of their association with riparian and aquatic habitats and its status as a keystone species. We designed our program to monitor the density of beaver food caches (abundance) within sampling units with beaver and the proportion of sampling units with beavers present at the scale of a national forest. We designated watersheds as sampling units in a stratified random sampling design that we developed based on habitat modeling results. Habitat modeling indicated that the most suitable beaver habitat was near perennial water, near aspen (Populus tremuloides) and willow (Salix spp.), and in low gradient streams at lower elevations. Results from the initial monitoring period in October 2007 allowed us to assess costs and logistical considerations, validate our habitat model, and conduct power analyses to assess whether our sampling design could detect the level of declines in beaver stated in the monitoring objectives. Beaver food caches were located in 20 of 52 sampled watersheds. Monitoring 20 to 25 watersheds with beaver should provide sufficient power to detect 15–40% declines in the beaver food cache index as well as a twofold decline in the odds of beaver being present in watersheds. Indices of abundance, such as the beaver food cache index, provide a practical measure of population status to conduct long-term monitoring across broad landscapes such as national forests.     

A System to Monitor Climate Change with Epilithic Lichens

The issue of biological monitoring of the local consequences of anticipated global climate change is considered for the Central Negev Highlands, Israel. Epilithic lichens are suggested as biological monitors. The proposed methodology of such monitoring consists of a sampling scheme, including lichen measurement along transects on flat calcareous rocks, and construction of a trend detection index (TDI). TDI is a sum of lichen species cover with coefficients chosen so as to ensure maximum ability to detect global climate trends. Coefficients have been estimated in a study of lichens along an altitudinal gradient from 500 to 1000 m a.s.l. The gradient study demonstrated that the TDI index is performed better than other integrated indices. Recommendations on this system to monitor climate change with epilthic lichens are given. Measuring, for instance, a hundred transects in fifty plots (two transet per plot scheme) allows one to detect a climate-driven change in the epilithic lichen community corresponding to a 0.8 °C shift in annual mean temperature. Such resolution appears sufficient in view of global warming of 2.5 °C considered by the Intergovernmental Panel on Climate Change as a realistic prediction for the end of the next century.     

Influences of Water and Sediment Quality and Hydrologic Processes on Mussels in the Clinch River

Segments of the Clinch River in Virginia have experienced declining freshwater mussel populations during the past 40 years, while other segments of the river continue to support some of the richest mussel communities in the country. The close proximity of these contrasting reaches provides a study area where differences in climate, hydrology, and historic mussel distribution are minimal. The USGS conducted a study between 2009 and 2011 to evaluate possible causes of the mussel declines. Evaluation of mussel habitat showed no differences in physical habitat quality, leaving water and sediment quality as possible causes for declines. Three years of continuous water‐quality data showed higher turbidity and specific conductance in the reaches with low‐quality mussel assemblages compared to reaches with high‐quality mussel assemblages. Discrete water‐quality samples showed higher major ions and metals concentrations in the low‐quality reach. Base‐flow samples contained high major ion and metal concentrations coincident to low‐quality mussel populations. These results support a conceptual model of dilution and augmentation where increased concentrations of major ions and other dissolved constituents from mined tributaries result in reaches with declining mussel populations. Tributaries from unmined basins provide water with low concentrations of dissolved constituents, diluting reaches of the Clinch River where high‐quality mussel populations occur.