PSAT和BPA在电力系统潮流计算中的对比研究

针对当前电力系统分析程序存在差异的问题,从潮流计算角度,对比研究了国内目前使用较为普遍的2款潮流计算程序(PSAT和PSD-BPA),分析了收敛误差、发电机分接头、负荷比例等不同初值条件设置对其潮流计算结果的影响。分析结果表明:PSAT在建模、可视化和自定义方面具有一定优势,比较适合小规模电网仿真和自定义元件模型研究;而BPA的计算速度快,计算精度高,比较适合大规模电网仿真。     

钢铁行业废水零排放技术探索

针对钢铁行业废水特点,分析了目前钢铁行业各工序及全厂主要废水污染控制措施,重点分析了二级反渗透工艺的主要流程及进出水水质,以及该工艺存在的主要问题。通过对大型钢铁集团的现场调研,以太钢采用的反渗透和蒸发结晶工艺为例分析了钢铁行业真正实现废水零排放的技术可行性。该技术可以很好解决钢铁行业浓盐水的外排问题。     

A red water occurrence in drinking water distribution systems caused by changes in water source in Beijing,China: mechanism analysis and control measures

A red water phenomenon occurred in several communities few days after the change of water source in Beijing, China in 2008. In this study, the origin of this problem, the mechanism of iron release and various control measures were investigated. The results indicated that a significant increase in sulphate concentration as a result of the new water source was the cause of the red water phenomenon. The mechanism of iron release was found that the high-concentration sulphate in the new water source disrupted the stable shell of scale on the inner pipe and led to the release of iron compounds. Experiments showed that the iron release rate in the new source water within pipe section was over 11-fold higher than that occurring within the local source water. The recovery of tap water quality lasted several months despite ameliora- tive measures being implemented, including adding phosphate, reducing the overall proportion of the new water source, elevating the pH and alkalinity, and utilizing free chlorine as a disinfectant instead of chloramine. Adding phosphate was more effective and more practical than the other measures. The iron release rate was decreased after the addition of 1.5 mg. L-1 orthophosphate- P, tripolyphosphate-P and hexametaphosphate-P by 68%, 83% and 87%, respectively. Elevating the pH and alkalinity also reduced the iron release rate by 50%. However, the iron release rate did not decreased after replacing chloramine by 0.5-0.8 mg. L-1 of free chlorine as disinfectant.     

Comparative study on the efficiency and environmental impact of two methods of utilizing polyvinyl chloride waste based on life cycle assessments

Two processes of utilizing polyvinyl chloride （PVC） waste, an incineration process and a vacuum pyrolysis process, for energy conversion were compared to determine their efficiency and environmental perfor- mance. We carried out a life cycle assessment with each of the two processes to evaluate their environmental impact and defined the goals and limits of our remit. As well, we established an inventory of PVC waste from incineration and vacuum pyrolysis based on process analysis, data collection and calculations. The results show that electrical power output per unit mass of PVC waste in the incineration process was twice as high as that of the vacuum pyrolysis process. Incineration had a larger total environmental impact potential than vacuum pyrolysis. The total environmental impact potential of PVC waste from incineration was three times higher than that from vacuum pyrolysis. Incineration of PVC disposed 300 ng. 100 kgI of dioxins and vacuum pyrolysis 98.19 ng- 100 kgI of dioxins. As well, we analyzed the data for their uncertainty with results quantified in terms of three uncertainties： basic uncertainty, additional uncertainty, and computational uncertainty. The coefficients of variation of the data were less than 25% and the quality of the inventory data was acceptable with low uncertainty. Both PVC waste disposal processes were of similar quality and their results comparable. The results of our life cycle impact assessment （LCIA） showed considerable reliability of our methodology. Overall, the vacuum pyrolysis process has a number advantages and greater potential for development of PVC disposal than the incineration process.     

Design and use of group-specific primers and probes for real-time quantitative PCR

Real-time quantitative polymerase chain reaction (qPCR) has gained popularity as a technique to detect and quantify a specific group of target microorganisms from various environmental samples including soil, water, sediments, and sludge. Although qPCR is a very useful technique for nucleic acid quantification, accurately quantifying the target microbial group strongly depends on the quality of the primer and probe used. Many aspects of conducting qPCR assays have become increasingly routine and automated; however, one of the most important aspects, designing and selecting primer and probe sets, is often a somewhat arcane process. In many cases, failed or non-specific amplification can be attributed to improperly designed primer-probe sets. This paper is intended to provide guidelines and general principles for designing group-specific primers and probes for qPCR assays. We demonstrate the effectiveness of these guidelines by reviewing the use of qPCR to study anaerobic processes and biologic nutrient removal processes. qPCR assays using group-specific primers and probes designed with this method, have been used to successfully quantify 16S ribosomal Ribonucleic Acid (16S rRNA) gene copy numbers from target methanogenic and ammonia-oxidizing bacteria in various laboratory- and full-scale biologic processes. Researchers with a good command of primer and probe design can use qPCR as a valuable tool to study biodiversity and to develop more efficient control strategies for biologic processes.     

SDA脱硫工艺在烧结烟气脱硫中的应用

介绍了沙钢集团4号360 m2烧结机全烟气脱硫项目的工艺选择、脱硫原理、工艺流程及投产后生产情况,通过对生产后运行分析,认为旋转喷雾干燥法(SDA)作为一种新型的脱硫工艺,适合作为烧结烟气脱硫的主工艺进行推广。     

Fluent软件在地表水源热泵系统温排水数值模拟中的运用

运用Fluent软件对重庆市嘉陵江化龙桥段瑞安新天地江水水源热泵系统尾水排入受纳水域的过程进行二维数值模拟,选取Fluent中非耦合、隐式求解器对模型内的定常流动进行求解,得出受纳水域受水源热泵系统温排水影响后的温升面积和温度梯度。结果表明:在温排水流量为2.0×103 m3/h、温差为4℃的条件下,计算该水域沿水流方向温升超过1℃的最大影响距离为150.4 m,温升超过1℃的水域面积约为1 525 m2,为模拟江水面积的8.59%。选取1℃温升值作为温升带的边界控制值,并在热泵系统最大负荷工况下,根据W=Q×ΔT计算研究水域热环境容量为19.402 m3.℃/s,剩余热环境容量为17.736 m3.℃/s。根据地表水环境质量标准,该工程温排水量小于受纳水域的热承载力,不会对受纳水域生态环境造成热污染。     

Effects of water velocity on bulk water quality and biofilm population structure in drinking water distribution systems北大核心CSCD

To study the effect of flow velocity on drinking water distribution systems, bulk water quality was monitored over 28 days, biomass was measured, and 16S rDNA was sequenced on the 28th day using a water distribution simulation system. The relationship between bulk water quality and biofilm was statistically analyzed. Flow velocity of 0.5 m/s yielded the most total organic carbon (TOC) (5.26 ± 0.17 mg/L) in the bulk water, the most bulk water bacteria (lg (n+1/mL-1) = 4.79 ± 0.02), the worst bulk water quality, and the most biofilm bacteria (lg (n+1/cm-2) = 5.48 ± 0.06). A Pearson correlation analysis showed the total number of biofilm bacteria was positively correlated with conductivity (R = 0.73, P < 0.01), turbidity (R = 0.87, P < 0.001), TOC (R = 0.94, P < 0.001), and total bacteria (R = 0.92, P < 0.001), and was negatively correlated with residual chlorine (R = -0.68, P < 0.05). Biofilm diversity was high under the low (0.1 m/s) and high (2.5 m/s) flow rates, but the bacterial diversity of biofilm was the lowest at the 0.5 m/s flow rate, in which Proteobacteria dominated the biofilm community structure. These results suggest that flow velocity affects bulk water quality and biofilm population structure, and water quality and biofilm population structure are interrelated, which provides the theoretical basis for research on biofilms in drinking water distribution systems. © 2018 Science Press. All rights reserved.     

洱海流域湖泊湖滨带福寿螺时空分布

福寿螺是世界100种恶性入侵物种中唯一的水生螺,已对大理及周边地区造成了不可估量的经济损失和生态安全问题。为探究洱海流域湖泊湖滨带福寿螺时空分布及与水环境因子、季节之间的关系,探索福寿螺在大理地区的入侵机制,为大理地区高效防治福寿螺提供建设性建议,并为福寿螺时空分布格局的相关研究积累资料,于2016年冬季和2017年夏季在大理洱海及其上游水源地海西海、西湖、茈碧湖、绿玉池,以及罗时江湿地进行系统抽样,利用统计软件分析福寿螺分布与水质关系,结合GIS,分析福寿螺的时空分布以及潜在入侵危害。结果表明,从空间尺度上,洱海流域福寿螺有进一步扩散的趋势;从时间尺度上,福寿螺的密度随季节性水位的改变而变化;洱海流域的福寿螺分布和水质因子之间基本无相关性。