Possible health impacts of naturally occurring uptake of aristolochic acids by maize and cucumber roots: links to the etiology of endemic (Balkan) nephropathy

Aristolochic acids (AAs) are nephrotoxic and carcinogenic derivatives found in several Aristolochia species. To date, the toxicity of AAs has been inferred only from the effects observed in patients suffering from a kidney disease called “aristolochic acid nephropathy” (AAN, formerly known as “Chinese herbs nephropathy”). More recently, the chronic poisoning with Aristolochia seeds has been considered to be the main cause of Balkan endemic nephropathy, another form of chronic renal failure resembling AAN. So far, it was assumed that AAs can enter the human food chain only through ethnobotanical use (intentional or accidental) of herbs containing self-produced AAs. We hypothesized that the roots of some crops growing in fields where Aristolochia species grew over several seasons may take up certain amounts of AAs from the soil, and thus become a secondary source of food poisoning. To verify this possibility, maize plant (Zea mays) and cucumber (Cucumis sativus) were used as a model to substantiate the possible significance of naturally occurring AAs’ root uptake in food chain contamination. This study showed that the roots of maize plant and cucumber are capable of absorbing AAs from nutrient solution, consequently producing strong peaks on ultraviolet HPLC chromatograms of plant extracts. This uptake resulted in even higher concentrations of AAs in the roots compared to the nutrient solutions. To further validate the measurement of AA content in the root material, we also measured their concentrations in nutrient solutions before and after the plant treatment. Decreased concentrations of both AAI and AAII were found in nutrient solutions after plant growth. During this short-term experiment, there were much lower concentrations of AAs in the leaves than in the roots. The question is whether these plants are capable of transferring significant amounts of AAs from the roots into edible parts of the plant during prolonged experiments.     

Organic interference of solidified/stabilized hazardous wastes

Liquid hazardous waste disposal in landfills is usually allowed only after solidification/stabilization. Although various procedures are commonly practiced, little is known about the mechanism(s) of the processes. A particular problem is the interference of organics. Small amounts of organics can interfere with the reaction between inorganic sludges and cementitous matrices. The present communication reports studies of the interaction between selected organic hazardous wastes and Type I Portland cement. Microscopic studies of the structural differences between cements set with water and those set with water plus organic liquids are discussed. In these studies the scanning electron microscope is used to observe samples fractured at 78K. The results provide technical background data on the ultimate stability of critical waste constituents solidified by various binding agents.     

Nitrogen budget and its environmental loading in an urban ecosystem with the rapid urbanisation of China

A detailed nitrogen (N) budget has been developed for an urban ecosystem based on the method of material flow analysis. How increased human activity and urbanisation influences N cycling have also been analysed. Total N input and output in the urban ecosystem of Zhengzhou City (ZUE) was calculated at 304.8?Gg was 275.3?Gg year^?1, resulting in an N accumulation of 29.5?Gg year^?1. Industry and human life activities, which respectively accounted for 43.8% and 34.2% of total N inputs and 52.6% and 29.1% of total N outputs, were the core of N flow in the urban ecosystem. Humans activities mediated more than 98% N inputs into the ZUE, 73.2% of N was released into the atmosphere and 11.7% into hydrosphere. This very large volume of released N could contribute to regional problems. High energy consumption, insufficient wastewater treatment facility practices, and low N use efficiency are the primary causes of pollution. The major challenge ahead for the urban ecosystem is how to manage high-intensity N pollutant inputs to the urban ecosystems coupled with incomplete N cycling and removal. Based on the analysis of the N budget and loading, this study also proposes an N management strategy for the ZUE.     

A two-dimensional inviscid model of the gravity-current head by Lagrangian block simulation

A two-dimensional inviscid model of the gravity-current head produced by the release of a relatively small volume of dense fluid from behind a tall lock gate is constructed by Lagrangian block simulation. Three numerical experiments are conducted for the lock’s height-to-length aspect ratios H/L _o  = 8, 4 and 2. The front speeds obtained by the simulations agree with the laboratory observation for a similar range of aspect ratios. The floor velocity in the wake behind these heads is found to be greater than their front speed. The high floor velocity is caused by the impingement of the coherent wake vortex on the floor. It is a condition that permits these gravity-current heads to maintain their structural integrity so that the fine sediments can travel with the head over long distances on the ocean floor. The structural coherence of the current head depends on the lock aspect ratio. The gravity-current head produced by the release from the lock with the highest aspect ratio of H/L _o  = 8 is most coherent and relatively has the greatest floor velocity and the least trailing current behind the head.     

A high resolution measurement of the morning ABL transition using distributed temperature sensing and an unmanned aircraft system

We used an unmanned aircraft system (UAS) to lift and suspend distributed temperature sensing (DTS) technologies to observe the onset of an early morning transition from stable to unstably stratified atmospheric conditions. DTS employs a fiber optic cable interrogated by laser light, and uses the temperature dependent Raman scattering phenomenon and the speed of light to obtain a discrete spatial measurement of the temperature along the cable. The UAS/DTS combination yielded observations of temperature in the lower atmosphere with high resolution (1 s and 0.1 m) and extent (85 m) that revealed the detailed processes that occurred over a single morning transition. The experimental site was selected on the basis of previous experiments and long term data records; which indicate that diurnal boundary layer development and wind sectors are predictable and consistent. The data showed a complex interplay of motions that occur during the morning transition that resulted in propagation and growth of unstable wave modes. We observed a rapid cooling of the air aloft (layer above the strong vertical temperature gradient) layer directly after sunrise due to vertical mixing followed by an erosion of the strong gradient at the stable layer top. Midway through the transition, unstable wave modes were observed that are consistent with Kelvin–Helmholtz motions. These motions became amplified through the later stages of the transition.     

Trajectory of a jet in crossflow in a channel bend

Mixing in rivers is an important issue with many applications in water quality and water resource management. Mixing of effluents with ambient river water is especially important, particularly in river bends, where secondary circulation complicates the mixing process. By comparing measured trajectories from dye tests to velocimetry data measured with an acoustic Doppler velocimeter, this paper models the trajectory of a jet in an open channel bend using a modified formula for a jet trajectory in a straight crossflow. The original formula is shown to be insufficient for modeling the trajectory in the bend. Modifications are proposed using the position of the centre of the main secondary circulation cell to account for the bend effects. In the absence of secondary circulation, the modified formula reduces to the original formula. Once the secondary circulation has developed, the proposed formula is shown to have better residuals, lower root mean squared error, and higher \(R^2\) than the original formula.     

Contamination characteristics of trace metals in dust from different levels of roads of a heavily air-polluted city in north China

Concentrations of eight trace metals (TMs) in road dust (RD) (particles?<?25 μm) from urban areas of Xinxiang, China, were determined by inductively coupled plasma mass spectrometry. The geometric mean concentrations of Zn, Mn, Pb, As, Cu, Cr, Ni and Cd were 489, 350, 114, 101, 60.0, 39.7, 31.6, and 5.1 mg kg^?1, respectively. When compared with TM levels in background soil, the samples generally display elevated TM concentrations, except for Cr and Mn, and for Cd the enrichment value was 69.6. Spatial variations indicated TMs in RD from park path would have similar sources with main roads, collector streets and bypasses. Average daily exposure doses of the studied TMs were about three orders of magnitude higher for hand-to-mouth ingestion than dermal contact, and the exposure doses for children were 9.33 times higher than that for adults. The decreasing trend of calculated hazard indexes (HI) for the eight elements was As?>?Pb?>?Cr?>?Mn?>?Cd?>?Zn?>?Ni?>?Cu for both children and adults.     

Wastewater treatment by catalytic wet air oxidation process over Al-Fe pillared clays synthesized using microwave irradiation

Microwave irradiation has been used to prepare Al, Fe-pillared clays from a natural Tunisian smectite from the El Hicha deposit (province of Gabes). Chemical analysis, XRD spectra and surface properties evidenced the success of pillaring process. The obtained solids present higher surface area and pore volume than conventionally prepared Al-Fe pillared clays. The main advantages of the microwave methodology are the considerable reduction of the synthesis time and the consumption of water. The microwave-derived Al-Fe pillared clays have been tested for catalytic wet air oxidation (CWAO) of phenol in a stirred tank at 160°C and 20 bar of pure oxygen pressure. These materials are efficient for CWAO of phenol and are highly stable despite the severe operating conditions (acidic media, high pressure, high temperature). The catalyst deactivation was also significantly hindered when compared to conventionally prepared clays. Al-Fe pillared clays prepared by microwave methodology are promising as catalysts for CWAO industrial water treatment.

Open image in new window

     

Multiple source spatial cluster detection via multi-criteria analysis

Multiple data sources are essential to provide reliable information regarding the emergence of potential health threats, compared to single source methods. Spatial Scan Statistics have been adapted to analyze multivariate data sources, but only ad hoc procedures have been devised to address the problem of selecting the most likely cluster and computing its significance. In this work, information from multiple data sources of disease surveillance is incorporated to achieve more coherent spatial cluster detection using tools from multi-criteria analysis. The best cluster solutions are found by maximizing two objective functions simultaneously, based on the concept of dominance. To evaluate the statistical significance of solutions, a statistical approach based on the concept of attainment function is used. The multi-criteria approach has several advantages: the representation of the evaluation function for each data source is clear, and does not suffer from an artificial, and possibly confusing mixture with the other data source evaluations; it is possible to attribute, in a rigorous way, the statistical significance of each candidate cluster; and it is possible to analyze and pick-up the best cluster solutions, as given naturally by the non-dominated set. The methodology is illustrated with real datasets.